How To Build A PC In The Corsair 220T! - Compact ATX Case

[@jdtechgear]

My friend and I started a gaming channel centered around not taking anything serious and incompetentcy. kzbin.info/www/bejne/p4DbgGZ3espnjpo

[@yussef961]

good video thx i have been building pc since 1999 but i make mistakes like everybody, given the hassle to take care into account if this will fit or not in this case i prefer my bench test case, even for my normal pc , when something goes wrong or i have to change a component so much easier, i don t undertand why so few people use it.

[@gregormiller4037]

Looked like a fun challenge, JD. Great build.

[@gregormiller4037]

Hey Sup....more live feeds ?

[@jdtechgear]

@@gregormiller4037 I'm thinking about doing them again!

[@aidanroos6196]

Did your case come with screws?

[@BenXCIV]

JD: "hold on, hold on... Me: Ah, he must be getting a ruler. JD: ...That's a 1070" Yes, perfect.

[@enzohuang223]

how long is the max gpu size? im looking to get a triple fan tho

[@Noahmate98]

@@enzohuang223 30cm/300mm

[@Noahmate98]

for example a 2080 super msi triple fan is 32cm so it wouldnt fit

[@enzohuang223]

@@Noahmate98 noooooooo anybody know any white gpu alternatives? just want basic ray tracing.

[@Noahmate98]

@@enzohuang223 gigabyte has one coming out soon which is 28.65cm

[@AlexGtheOG90]

I just ordered this case for my first ever pc build.

[@AlexGtheOG90]

Michael D like $1500 I already have a Corsair cx750m psu, rog strix b450-f motherboard, Ryzen 7 2700x cpu, Samsung evo 860 1tb ssd. Still need a gpu, Ram, OS and monitor.

[@neima2053]

@@AlexGtheOG90 i have the same case and i ran into the psu problem. the rm750x didn't fit so this video helped to remove the cage for the hard drive

[@AlexGtheOG90]

rosie my psu is 149mm or so the maxx length it can fit with out removing the hard drive cage is 180mm I believe.

[@neima2053]

@@AlexGtheOG90 i already tried fitting mine in but all it did was scrap my psu and blocked the cables so i had to remove the cage. 😂😭

[@AlexGtheOG90]

rosie fun fun! I test fitted my cx750m fits with the cage in but it’s gonna be a tight squeeze. I’ll prob just remove it since I have a Samsung 860 evo 1tb ssd. I still need a gpu and Ram for my build. Lol

[@Will-ws6gb]

i Ordered one of these cases for $98 open box on amazon, and now i want 3 more sp 120 pro rgb fans to fill the case. turns out they charge $80 for the set of 3 fans! So i purchased a second case for $98, removed the fans and controller, and sold it on fb marketplace for $75! So i only spent $23 on my second set of fans :)

[@HYBECTIVE]

Will absolutely smart!

[@justinrosa56]

S T O N K S!

[@ItsFlipppp]

The fans are on the cheaper side of the corsair RGB line - Get the ones that have the outer ring :P you'll be blown away.

[@davidfowler9520]

here in canada the case is $139.99 and each extra fan was $27.99. i would have done the same thing, bought them today

[@Closamp_1]

Hahaha that's great

[@NissanBroke]

It's been a long while since I was interested in anything PC related. But your soothing voice brought me back.

[@jdtechgear]

Thanks Uncle Bobby B!! You got any Ford Fiestas on your lot??

[@xum0007]

Sus

[@notfruity5217]

@@xum0007 ur so sussy i know u took my fortnite card

[@xum0007]

@@notfruity5217 ong

[@seatek]

Love it! That’s really good to know about the drive bay in that space with the PSU and cooler mount. That’s the kind of thing you can never tell until you start building, so really good to hear. Honestly, I’ve really been getting into Corsair’s hardware lately.

[@jdtechgear]

That's what I thought too! You can tell a lot from a case by looking at the marketing material, but building in it can tell anither story

[@zlimvos]

Hi JD, and potential builders, Just wanted to say that I managed to build this + 1 HDD + 1 SSD + both fans on the AIO. Here are my notes: My memory modules were short (no heatsink), thats why they fitted. The power supply fits with cables and HDD, the trick is to insert the power supply face first and then turn it in the proper angle. The attachable power cables where pre-inserted (not all ofcourse, as many as i needed). My motherboard didnt have rgb port so I used All the RGB lightning cables (and its alot). to accomodate these cables on the back, I pulled them around top right corner, used the gap behind the cpu for the 'thick' rgb controller and connections, and down always from the right side. That allowed space for the SSD. A photo would be easier, but in any case, everything fitted, and I LOVE this case!

[@mikoszuland4859]

Have you got a ig or twitter, so you could show me?

[@codertommy6883]

1:50 This is a GTX 1070 ITX builders: im about to end this whole mans career

[@brycemckrackin1726]

is it not a 1050?

[@akira8817]

Bryce Baker no it got a sli connector, gtx 1050’s dont have that lol

[@GeoSam]

Airflow is key and I think Corsair hit the mark, with this form factor case. Excellent build video, thanks DJ.

[@jdtechgear]

Thanks Geo!! They really did, and it's nice to see it be stylistic and practical

[@PHDarren]

Regarding the fan node and connecting fans in order, you can move the order of fans in iCue if you have them wrong. Just by dragging and dropping the fans on the screen.

[@riteu]

I never fail to be filled with joy when I see a sexy case that doesn't sacrifice airflow in the front. ^^

[@jdtechgear]

It's like an instant attraction to a case I see with airflow. Like a nice car coming down the road

[@ismailbouabdillah6755]

I’m just wondering why not mount the radiator in the front since it already has the fans for it and the other 2 white fans would be on the back and top for airflow. Great vid btw!

[@cleanleaksv2]

the gpu is too big to front mount

[@megtommy]

Thank you for reviewing this with the radiator. I'm working on my first build and shamelessly want to make it pretty. I assumed since they suggest buying the additional fans and radiators, that it would fit. I'm glad to know this is something I will have to watch out for.

[@jmtardogno]

If you were to go with low profile memory sticks, like the Corsair Vengeance LPX, that have no RGB, both fans should fit in the proper configuration where he is mounting the AIO. The Vengeance RGB stands at a very tall 51mm, to the LPX 31mm. Something to consider for a case with such a small form factor. I believe G.Skill trident ram is several mm shorter than the Vengeance RGB, it may be enough to make the difference

[@Dom-yx2iq]

Not only the quality of this tutorial is brilliant but the choice of video is so usefull

[@jdtechgear]

Thanks Dom!!

[@acoolername0561]

this video has just saved me a few hundred dollars, I was gonna buy the same case, ram, and radiator, but now seeing as it has clearance issues, im going with a different case, thankyou

[@JuanjoisBack]

theoretically with the low profile VENGEANCE RGB PRO SL, you wouldn't have that problem. Have you tried it?

[@fredcrewneck]

was your psu fan facing up or down when you did the build for this video?

[@triphix1216]

Great video bruh. I just did a build this year with the Corsair 220T case and I love it. I needed a smallish case that had good airflow. Building in this case wasn't bad at all.

[@jaooaj9340]

The best thing about this case is that you can vertical mount your gpu when building mATX to cover the empty space on the bottom. Clearance issues in regards to installing 240 AIO on top and installing atx psu is very helpful. Been eyeing for sf750 as I am still an HDD user. Good job with the build!

[@Jseagle1989]

Which mount would you use to have access to the output for the GPU though?

[@ziyocon2324]

I got this case not to long ago and just built it and its pretty good only complain is where that hard drive tray is if you still want to use them and you have a modular power supply you can . I did it but you still have to remove the tray to get the normal atx power supply in their and figure out where your cables are going as well before re attaching the tray but it does work that way and you can still get a decent amount of cables going everywhere just have to really plan it out and good wire management. Or get an ssd m2 or 2.5 inch theres a holder on the backside for the 2.5 thats the easier option in my opinion . also wanted to say this video helped me figure out where exactly i was going with everything with my wires to motherboard helped out alot thank you for this kind of content.

[@UnGodlyLoads357]

This helped a lot. Ordered the black version and h100i thank god for having low profile ram already, loving it. Thanks man

[@mr.ramazan6683]

Are the temperatures okay when you use the AIO like this with one fan? I have the same case and RAM :D

[@MrCaso1996]

i believe it should be fine as long as you don't OC ur cpu but it may be a bit loud i could be very wrong I'm a massive noob when it comes to this stuff

[@welshman2011]

How was the temperature with the CPU after putting 1 fan at the back?

[@originalaquatics7611]

Heheheh 200

[@yusunai]

Just discovered your channel and man you got a soothing voice 😂

[@pinkrush6768]

I just built my first pc in this case, the cable management was hard and really stressful. I was about to fit 1 tb hdd which made the cable management more hard. It was a tight fit trying to put the back panel on.

[@TheFahadk9]

Hey, I'm kinda facing the same issue, i have one hdd, can you tell me how you fixed that?

[@leoalper4530]

The fact that the AIO does not fit on the top is a real bummer, however, couldn’t you just take off the fans, put the radiator on the front on the case then put the fans from the AIO on the top? That way you can still use and AIO and the fans don’t look weird set up the way you did it?

[@RaptorJesus696]

Great video I watched this to prepare for mine coming in the mail. Made me feel confident in building it, not my first pc by far but my first fancy case with RGB controllers and the like.

[@ActionManXVI]

Just ordered all my new PC parts with this case, building it tomorrow! Great and informative video bud

[@admasworld1]

ActionManFTW I recently built my pc in this case, looks amazing

[@Dzonssi]

iKnockedYou I’m waiting for my parts to arrive!

[@maximilianhector7594]

Got the same problem with the radiator. I just mounted it to the front upon the two upper fans in the front, which resulted in having not more than 2 mm's between my 2070 Super and the radiator, but works properly from what i see till now :) I recommend a bigger case if you wanna mount your watercooling system at the top of your case

[@crimsonreddy]

Does your 2070 have 3 fans or 2

[@maximilianhector7594]

@@crimsonreddy 3, IT's a Gigabyte one. But meanwhile i bought a Corsair 4000X where everything fits much better with way better Airflow

[@quentinroehr7708]

10:06 Second fan will fit on the radiator with RAM low profile like HyperX Fury ?? 1cm smaller than the Vengeance Pro..

[@benejgreen]

Anything under 34mm tall will fit with the second fan.

[@stuartrobson5265]

Just found out about this Problem..luckily I'm building another pc so I've ordered some low profile RAM sticks for this build...like you I like the case..Great review 👍

[@JuanjoisBack]

teóricamente con las VENGEANCE RGB PRO SL de perfil bajo, no tendrías ese problema. Lo has probado?

[@DavidChristmas]

Hello, I have a question. Do you think the second fan will fit if you had a low profile ram like Crucial Ballistix LT? (10:09)

[@impxlse3495]

Canberk Eriş I think it would more depend on how high up the ram slots are on the motherboard

[@hades8072]

@@impxlse3495 i dont know of a single motherboard that elevates ram slots. and they all use a standard size of slot so i think it does depend on the ram sticks. i got it to work with hyperx fury sticks. if you really look at his configuration. it only misses the cut off by less then half of an inch. his exact ram sticks are 2 inches tall. and most low profile ram sticks are 1.35 inches tall. so it would probably fit.

[@impxlse3495]

HadeS no lol, I mean how high up on the board, not how tall

[@hades8072]

Impxlse oh i see what u mean. i don't know how many motherboards would put the ram slots low enough. for most i think it's about if the radiator can clear the motherboard itself

[@impxlse3495]

HadeS ah ok 👌

[@hades8072]

btw for anyone wondering, with most motherboards if you use low profile ram (i use ddr4 hyperx fury), you can fit the fan on this particular radiator.

[@gmoney8739]

HadeS Do you think Corsair vengeance LPX memory will fit about the same as the hyperx fury? I have this case and just ordered this AIO and was wondering if it will fit on top as well.

[@johann1336]

Nice that's great ! But dude, is the radiator stick to the motherboard ?

[@hades8072]

@@johann1336 no there is usually a little clearance depending on your case

[@hades8072]

@@gmoney8739 sorry i don't see this but if ur still wondering if it's not rgb pro probably yes but you can do measurement comparisons to be sure

[@johann1336]

@@hades8072 on the corsair 220t ;)

[@Saitekchriss]

OH MY GOD THANK YOU! I felt so incredibly silly trying to figure out how to install my cpy liwuis cooling when the second fan would impede the ram on the motherboard, I wish I had known before. Have you attempted to or seen anyone install it in the front?

[@hydrox2149]

I have a 220T in black with the same white corsair AIO in this video mounted in front, because it wont fit on top which sucks, I would get pics to you if I could.

[@moorstring]

This is a cool channel. I love the presentation. I just bought this case for my new RTX3080 build.

[@moorstring]

I have to take it back. The graphics card is too long. :)

[@deadman7314]

How long was ur gpu?

[@leavinmymark]

Heyo, I bought this exact same case and have the same AIO. This was SUPER helpful in helping me figure if I should reconsider some things in my build. Thank you!

[@smokeyjoeDingDongExores]

Just bought this case without looking first until watching your video will need a new power supply to fit the case as I need hard drive space a rookie mistake on my part lol thanks for the video

[@Zechs113]

Will both fans fit with the Vengeance LPX RAM installed? My PSU is Cooler Master MWE 650 80+ gold it has mostly flat cables besides the 24 pin ATX so I'm good on that part.

[@Martin-ff2yy]

i think that it fits, but do u know it?

[@tristenbaxter2452]

So in the long run will the fan issue he ran into cause the CPU to overheat or is that a fine permanent fix?? Referencing about 10:02 in the video. thank you for any help

[@BlueBuffalo207]

Just finished my build in this case. Was tight to get everything in place, but worked.

[@masonbrewer3466]

I just finished my build too. Loving the case the fan set up looks sick! I have 6 fans going in it lol

[@rustinpeace770]

I’m building in it tomorrow. Any tips or problems you ran into that are worth sharing?

[@PerfectedToast]

Turbocharger I am building in it as well tomorrow! Best of luck!

[@rustinpeace770]

PerfectedToast Thanks!! You too

[@not_zizou]

damn just bought this case aiming to get the same aio and ive the vengeance pro theres any way to make it work like putting a slimmer fan on the ram Side?

[@archiesmithson8789]

literally about to order it to and had the same problem

[@ParadoxdesignsOrg]

I just about bought this. Thankfully your information showing how you have to remove the mechanical drive trays helped me as I'll need those and ofc a PSU... so either I'll have to buy some bigger SSD's or find another case.

[@PerfectedToast]

I got this case in the mail today, my mobo got delayed and it’s coming later this week. Going to be building in this and I’m nervous lol

[@cyn1103]

Building in this currently and its hell.

[@Ema-.]

How is your pcs now guys?

[@rcowles3]

Just rebuilt into this case, and had to go from my X62 AIO to a Cooler Master air cooler, and was curious if you still had the platinum aio still mounted on top? Or if you were to able to switch the fans would that fit? I just bought the vengeance pro RGB ram and not sure if it’s lpx enough

[@liediamond7336]

I have 2 questions 1. Is there good cooling in the case 2.Does it come with the corsair fans and if it does how many?

[@Klasus357]

Very good and useful video! I would recommend it for ppl who are building for the first time their PC with this case.

[@NoName-ud4np]

To take off the hard drive cage, what kind of screw driver do you need ? A Philips ?

[@cdfs_lurk2cold746]

Just ordered this case today. Cant wait to assemble with it.

[@xrosie3273]

SAME !!!

[@cdfs_lurk2cold746]

@@xrosie3273 I'm loving it. Build is setup and the temps are always less than 50°c. That's with AAA games too

[@johann1336]

@@cdfs_lurk2cold746 do you use watercooling ?

[@RC.56]

Where does everything plug in? I know it’s vague, but I don’t know where anything plugs in. 465x case, H100i RGB platinum, and one QL120 fan for the back exhaust. So 6 fans. All I’ve done is secure the motherboard. I think I will do a front mounted radiator behind the fans to give more room up top. That’s as far as I have got, I saw you plugged in a lot of headers before installing anything else, that’s where I’m stuck

[@brandensoutdoorb-channel8084]

always install ram, cpu, and AIO block before installing MOBO into case. Then pre-route the 12V EPS/CPU power cable through the top cutout to make sure it clears the board/radiator ahead of time. Mount the AIO up front to fit both fans. A single fan on a radiator will give crappy thermals. Better off going air if you keep it that way.

[@DinoGooch]

If you took out the hdd cage would there be another solution to installing a single hdd in the case..? I recently bought this case and am worried if I’m not gonna be able to install my hardrive in it. Would you just recommend only using 2 SSD’s? Very helpful video thank you👍🏻

[@Cut2TheChaseTV]

So how do I turn down the speed of the 3 front fans on this case? They are 2 loud

[@goober8769]

Does having all the pc parts make them hotter than in a normal case?

[@Tacticalpanda757]

If I wanted to get this case for my first build and wanted to keep the hard drive trays what’s the best way to go about that.

[@strafe9315]

you have to remove the dust pad and mount the radiator fans on the front. Put the others on the top which would work but you don't have that dust filter

[@skunkybuilds]

Great video bro! I subbed after the force it down your throat part. I was dying haha. Found your video surfing for Corsair 220t builds.

[@justinshort4276]

Not sure if anybody has already said it, but you can actually fit a 3 fan GPU in this case fairly easily. I just did a build with this case and a gtx 1080 TI ftw3

[@ThenewguyYT]

Having the same case and just curious how others are building in it, You 100% could mount the AIO up front and it gives just enough clerence to the cables and still just fits a evga duel fan 2080 super. all in all a good case if you want to make it look completely full aand you dont have crazy over the top 1000 watt supplys and still expect to use HDDs

[@Jseagle1989]

How would that fit a rad with the hoses at the bottom of the rig? Wouldn't the GPU get in the way?

[@ThenewguyYT]

@@Jseagle1989 Depends on the GPU, I have a 2080 Super Dual fan and it fits just fine.

[@gabiitou]

Only one fan in the radiator? How are your temps? I have the exact same case and just ordered the same radiator and thinking to put it in the front in order to mount Two fans.

[@ST4R1SM1NE]

why not mount the rad in the front with all that air moving thru temps shouldnt be a problem

[@jasonlee8188]

Yeah. That's how they mounted it on the official Corsair website.

[@ragz713]

Appreciate the vid man! Just bought this case and wanted some research before I got into it: Build: Case: Corsair iCUE 220T RGB Storage: Seagate FireCuda 510 1TB RAM: G.SKILL Trident Z Neo (for AMD Ryzen) Series 32GB (2 x 16GB) 288-Pin RGB DDR4 SDRAM Desktop Memory F4-3600C18D-32GTZN Mobo: MSI MEG X570 ACE Motherboard CPU: AMD Ryzen 9 3900X 12-core, 24-Thread Unlocked Desktop Processor with Wraith Prism LED Cooler GPU: NVIDIA GeForce GTX 1070 (Glad you showed it fit lol) PSU: CORSAIR RMX White Series (2018), RM750x, 750 Watt, 80+ Gold Certified, Fully Modular Power Supply - White

[@loafywolfy]

hey did you build it? did your psu fit with the hd cage on?

[@ragz713]

@Bruno Sure did....I have both an SSD and reg HD in there....its a tight squeeze with all the wires but just think about your wire runs and you'll be fine. Also, be sure to check your GPU size...I honestly dont think a 3 fan card would fit

[@loafywolfy]

@@ragz713 mines a two fan but i'll measure it

[@paulwearo]

Kinda sucks that you couldn't mount both fans to the radiator for the cooler. That's a deal breaker for me, was really looking forward to getting this case

[@DeRock401]

Only 1 fan on the radiator? How's the thermals between one and 2 fans big difference?

[@cnimrod]

I don't understand how do you like this case when you point all kind of flows and errors in the design?? it's basic that if you put holes for radiator you will be able to add radiator with it's fans! (which you can't in this case..), moreover - you showed that if will be difficult to connect SSDs on their slots after you are done with the cables - not good at all! But I do want to say - LOVES your review - it feels genuine and you really connected PC parts so we could see if we will like it or not! great job! i think you should also mention if it was easy case to work with or not - I know it should be one time but in my experience it' s a little be frustrating to work with case that small especially when you have the space under/on your desk and you can have a bigger case.

[@xlDefalG]

Hello JDTechGear! I have a question, If I put the radiator on the front can I fill the 3 fans? I mean, Radiator + 1 more fan on the top or below?

[@Chris_P_Bacon]

Thanks for the video! Really helpful for my PC build. I hope I can fit the ps and the harddrive cage together...

[@jdtechgear]

Glad I could help!

[@zach4537]

If your PSU don't fit remove the bottom or top HDD cage and feed them in there. Tons of room

[@ayushjoshi7599]

Really liked the thing that you showed the problem in installing the second radiator of AIO.... Liked they way you compiled the Video... It was a good One...

[@jdtechgear]

Thanks man

[@Shindoo]

I wonder if I can fit H100I RGB platinum aio on top of this case with VENGEANCE RGB pro ram on B450 tomahawk mobo. I would really appreciate some help with this.

[@moreehno9660]

LMAO Got the same issue here

[@Shindoo]

@@moreehno9660 I decided to do not take a risk so im going for corsair x465 case. It has much more space, obviously its a little bit more expensive but still overall much better. I couldnt find any other lower-end solution. :/

[@moreehno9660]

Shindo well since I already bought this case, i think the corsair hydro h60 which is a single fan radiator is a good option for my 3600x and you can install it at the back of the tower instead of putting on top of it

[@gwcomputers]

It will not fit. Any 240mm will not fit with tall rams on that case

[@iAmAngotti]

Just bought this case and in the process of getting other parts as well, I actually have the same CPU Cooler in my cart and was nervous on if it would fit, it claims it should with the ram I got but I see now that I might have to adjust a bit but overall your build still looks fantastic so I know if I have to switch it up it wont look to bad at all

[@deklanburgess1907]

With ur build how much will it cost? I’m tryna use this case on a $700 budget and have all my stuff picked out but idk if it’ll fit

[@iAmAngotti]

@@deklanburgess1907 im up to $1400 and have only bought half my shit but I went with Intel instead of AMD & a Asus motherboard, on top of that liquid cooler & then a 2-1TB Samsung M.2 NVMe SSDs. I went a little overboard because its my 1st build and my last gaming pc my cheap ass bought it bc it was $800 and came with a monitor and all that other shit

[@iAmAngotti]

@@deklanburgess1907 ive been learning more working in a technology repair shop & my pops use to build pcs and I always wanted to build a gaming pc so I went bigger

[@La-eh4jk]

So no dual fan on top with the radiator? What's the point then? Is there any other case where I can mount the radiator on top with BOTH fans?

[@_imteeyaz]

Cleanest / crispiest audio on KZbin 🙌🙌🙌

[@calebnielsen9583]

JDTechGear what graphics card did you use

[@bowlcutgaming7295]

Is it possible to set up the cooler like you have done and run high setting games and stream at the same time without having to worry about temps?

[@emmettmulroy6138]

do many cases suffer the AIO clearance issue? I've just bought a new watercooler and encountered the issue myself and done the same workaround (also using this case). I want a new case but I wanna make sure itll give me all the space I want

[@user-mg8mb6ss2t]

8 months ago i upgraded my core components, but not my case/fan situation. Now i'm sold. Im ordering the 220t in white, along with a set of white cable extensions, and a phanteks vertical gpu mount. It will only cost me $175, and i can sell my old case and fans. (fractal design focus g and 6 thermaltake tt rgb fans with 2 controllers) Hopefully i will be able to get $75 for everything.

[@user-mg8mb6ss2t]

Worst choice i made was buying a corsair h60 aio for my cpu, the tubes are very short, and very stiff. The only way to really mount it is to the top of a case, and by doing so you have to criss-cross the tubes. Looks like crap. I may downgrade back to my stock ryzen cooler and sell that aswell. save up for a rgb aio maybe.

[@jellyfishedx]

Damn, just bought this case but not sure if my 3 fan Sapphire r9 3900 gpu will fit.

[@thegrand5104]

Tell me how your build went when you have finished! Going to build in the same case.

[@jellyfishedx]

@@thegrand5104 It's an XMas gift for my son. But, I might open it up can see how the Sapphire card fits in there. I did some research and it should just barely fit.

[@jellyfishedx]

@@thegrand5104 I just finish building this case and the 3 fan Sapphire r9 390 fits inside. Maybe half inch of space between the gpu and the front fans.

[@OZ_LVS_Fishing]

Can I fit a gigabyte 2060 Pro white (it’s a three fab case) if I mount it vertically

[@Loading_______]

just bought this case from cyber power with a 3080, am I going to get some compatibility issues?

[@karltg9084]

What size power supply can fit in this case? Cuz without taking out the hard drive case...Pls answer🥺🥺

[@iitzkris]

hey quick question will this fit rx 5700 xt from gigabyte the OC edition with 3 fans also im using a Evga 850W G+ which is like 10mm smaller. And here are my PC parts do recommend me changing if anything is wrong. PC Parts :- 1. Processor- Ryzen 7 3700x 2.MotherBoard- Gigabyte X570 Aorus Elite 3.Ram- G.Skill 32 GB (2X16) 4.Storage- a. SSD- silicon power 512GB PCIE Gen 3 b. HDD- Seagate 4 TB barracuda(7200 rpm/256mb cache,3.5 inch) 5.PSU- EVGA SuperNOVA, 850 watt, 80+ gold 6.GPU- Gigabyte Radeon Rx 5700 xt OC,8 GB 7.Cooling- a.DEEP COOL Rf 120 mm fans (x5) b.Artic Freezer 34 esports 120mm cooler c.Artic MX-4 Thermal Paste 8. Case- Corsair iCUE 220T i got extra fans if needed u know....

[@XenoDeki]

IIRC, another tech YT channel asked Corsair if it supports AIO on the top mount and they said no. It's only limited to the front mount for AIO.

[@AstarothDeathSquirre]

You can fit an ATX Power supply (corsair RM650) without issue by taking out the HD cage, put in the supply and then refit the cage.

[@ezrak8185]

where do i plug my RGB fans in?

[@katiepersons6575]

Never mind the radiator, can you even fit a second 120 fan on the top just for exhaust? It still looks like it would be blocked by ram.

[@LazyClown48]

My first build with this case, but black. Fans work, but no RGB and it is an RGB model. Did I do something wrong? I don't have any SATA cables because I am only using an NVMe. Do I have to toggle it on in the BIOS??

[@spoons27]

I have just got this case I have a problem with the lighting node not being seen by the Corsair software. I have plugged the usb into all the onboard USB ports but the lights stop and it is never seen by the software. If I don’t plug it in the lights still work. Do I have a faulty node?

[@PHDarren]

Ps I have that exact case, 4 SP120 RGB fans (3 that came with it plus 1 extra for rear exhaust) on the node, 2x SSD rear mounted, 2x HDDs in the drive bay and rm650 PSU and I can get the panel on without it bulging. I don't use braided 3rd party cables as the Corsair PSU cables are all black anyway. Biggest headache was the always stupidly stiff and thick USB 3 cable which connects next to the 24 pin on my mobo so there's lots of it left behind to hide. If it could be run and connected to a bottom mobo header instead then it wouldn't be so bad.

[@Thanos0001]

The only thing that I wish I could change would be that I could shorten the AIO tubes going and returning from the radiator.

[@dominatesym3513]

Sorry kind of a newbie here, if I want to upgrade the case down the line I should have 0 problems right

[@JoshuaMolina]

How did you connect all fans to the mobo? did you do a fan splitter?

[@TheCaptianKurt]

Hey JD, I’m building in this case and found the same issues obviously. But another issue I’m having is finding the right place on my mobo for the rgb fans. Nothing seems to fit properly! Any tips or if you can spare some time to go over it would be much appreciated!

[@jdtechgear]

Like as in the connector for the RGB on the fans won't connect to the motherboard?

[@TheCaptianKurt]

@@jdtechgear thats correct yea,I have the asus rog maximus hero xi and the corsair h100i with fans. and i have power to the fans but the RBG headers on the mobo are male as well as the fans.. and this is my first build so I'm not sure if this normal or if I'm missing something. Feel free to DM me if possible.

[@jdtechgear]

@@TheCaptianKurt what type of rgb fans are these? They should either have a hub to plug onto, or an additional attachment to connect the rgb wires of the fans and plug into the motherboard rgb header

[@TheCaptianKurt]

@@jdtechgear they are the ones that come with the h100i

[@DinoGooch]

I have the same case, and the same liquid cooler AIO coming in mail. Would having only one fan connected to the radiator change performance? Couldn’t I just mount the radiator to the front?

[@DinoGooch]

/\

[@ReykoRL]

So u said u could probably cant put a triple fan GPU in there right? I have a 2070 Super OC 8GB would that fit in there cause i cannot really see it in that angle?

[@JamesYoung99811]

Hello, may I ask what you ended up doing with the second placement of the fan for the cpu cooler if you did not get it to fit on the top?

[@questlove_satx]

Instead of the 2nd fan, he installed a mini-fire suppression system, which came in handy when the 9900k caught fire because it hit 217c being cooled with only 1 fan.

[@JamesYoung99811]

@@questlove_satx welp,, Thank you

[@MrDjvin92]

So how did you run the aio USB plug first liquid build ever

[@xs3tsunax]

in the promotional video for corsair spec delta which has the same frame as this, they manage to put 240 rad in there with vengeance rgb memory module. idk how they manage to pull that off

[@gwcomputers]

No fans installed or only fans installed. It was a promotion lol

[@someguywithmtndew5691]

are you able to carry this case around. like i just want to take a PC to my friend's house

[@adamnguyen3061]

Hi I was looking to purchase this case but I have a CoolerMaster MasterLiquid ML240L RGB V2 AIO will this fit fine in the case? It is 240 Radiator and Dual fans 120mm

[@googleuser0001]

Sooo i have an i7 10700k using a EVGA AIO 240 cooler with the Vengeance pro RGB Dimms what would you recommend? Using a standard ATX mobo also I am also building in this case

[@zZzIndica]

Dam seeing this video I might run into issues installing the second fan on my radiator I have the same case . Would it be dangerous if I only had the 1 fan on my radiator?