How to build a picnic table jig

[@jbll36]

Hello Cr Fr. Thanks for sharing the video on the jig. If you have a deck of cards, hold the deck flat in your right hand. Use your thumb to slide the top card off. Go through the entire deck then repeat it again. Soon your thumb will move normally again. I did this and it worked for me. Enjoy the day. Ray L

[@sibue015]

Good to see your hand is recovering! ..Time for a beer!👍🏼👊🏼👏🏼🤣

[@MattBangsWood]

Hopin' you have a speedy recovery brotha!

[@Thecrazyframer]

Thanks man. Be careful up there! I don’t think I’ve met one older framer that hasn’t had one bad fall!

[@MattBangsWood]

The Crazy Framer It happens to the best of us! Everyone I know has taken a fall at some point in their career. Can’t wait to see your next build - heal quick man!

[@leontunnicliff1737]

Hey, crazy I think people are missing the point your OBVIOUSLY not independtly wealthy and now he probably has a few bills that he has to worry about also.All j can say. Is that I had my pinky finger and my middle and the one in between cut off by a freak once in a million years when I was 23 and I'm 51 now and it took a good 6 months before my fingers got desensitized so i could hold something without my hand opening up on its own. So what my therapist had me do is to start with flower then move to the next tolerable ingredient that I had at home then eventually I was able to stick my hand in cornflakes. Because down here in the 50 states we don't have any national health care and I was young and thought that I would never get hurt.Truust me I bet you already knew that. Wishing you a speedy but safe recovery.

[@jlupe7668]

Nice!!! After watching your video time for a beer🍺🍺🍺 👍👍

[@lorenrickey5481]

Good to see you improving Crazy. To keep the videos coming out, how about creating CF picnic table talks discussing home building? Or walk us through lumber yards or home improvement stores you use? Or film your construction friends working while you narrate? Anything to get traction on your channel again. We miss you.

[@bradrolling8637]

I'm gonna build this jig as soon as I get the Coors light iced down! My niece just asked me to build her a pic-a-nic table!

[@glenschmeisser6633]

Good to see ya again. Glad your hand is healing.

[@MrStacygordon]

Good job. Hope you get better soon. Waiting for more house builds.

[@tangodown5746]

I see Occupational Therapists are taking good care of your hand. Great to see you back, have a nice recovery From a french OT

[@TonyT-lo2sz]

Your videos are will missed. Glad to here your still kicking.

[@duketran62]

Brilliant! You're very creative, natural solver with the fast working mind.

[@BaconDanish]

Good job mate. Time for two beers.. 🍺🍺🤝⭐️⭐️⭐️

[@alsouthern7190]

Your videos are missed! Thanks for sharing the jig build! YT seems a little empty right now so get well soon!!

[@sennest]

Sweet and fantastic jig!!! Thanks for sharing!💣💥😎💣😜 Well thought out design!

[@MrSHWP1]

Big thumbs up for you man!👍🤘

[@frank-to7lu]

Good to see you coming back... Thanks for the Jig...

[@Jaypark1113]

Good to see you are getting better.

[@tylerstrong7134]

This is a really cool picnic table jig! Thanks for sharing! I hope that your recovery is going good!

[@floydgath1149]

Good to see you are doing well though we lost ya keep up good work

[@edbenson98]

You work better with one hand than most do with two! #HurryBack #TCF

[@michaelvangundy226]

Good to see you doing better. Back at framing just in time for snow.

[@l00se8]

Watching that paselode misfire that many times gave me weird amounts of rage

[@royalvarez6436]

I have said it before and you just proved it-you are the Canadian Macgyver! 🔨🍻

[@thebird135]

Glad to see you’re almost back

[@paulhammond7489]

Greetings CF... take your time getting that thumb in action before you do another house build, we'll patiently for those, meantime if you feel the need, then make some more jigs, fixtures and tool tips etc from home will keep us all happy :)

[@carpnotes4607]

Yeah those Paslode gas guns make for a good kayak anchor. I finally threw mine out cos it got too frustrating to use. Great vid, can't wait for new build vids!

[@luis00903]

I was waiting for that jig how-to !! Thanks

[@theoriginalbuggins]

Glad your on the mend!

[@buildingutility815]

Thanks for the effort Crazy Framer, gota feel weird using the other thumb to trigger the gun. Stay strong!.

[@robertlaird6746]

Glad to see your hand is recovering! It looks like it will be much better now that the plate has been removed. Try rubbing some vitamin e oil on the cuts. It will help it heal much better and as a result will cause less scaring.

[@pcranebmw]

Good job CF. Get well.

[@DieseLGuY365]

Cheers bud. Broken hand and still hard at work. Love the vids man. I production frame for a living, we need you on the site.

[@salvadorcastillo1539]

Good to see you again!!

[@ugbc3276]

Great vid. Always wanted to learn how to build stuff.

[@user-oq9xj1gp8f]

Thank you!🤙

[@cotemc3587]

Hey budd taker er easy out der,....hope to see another build,....soon as your good to go

[@BobCaseyAerial]

Thanks for showing this CF

[@ron827]

Very cool jig and not bad for a one handed carpenter. :-)

[@peterkiernan1668]

Is that a paslode made splint.good to see you are back in action.

[@tristonevanko5726]

Glad to see you back! Try Servicing your nail gun It will probably work a lot better.

[@gerbenzondervan3331]

Had the same gun, sold the useless piece of crap. Own a Hitachi now with just battery power, way better.

[@Warren3carpentry]

Great ideas here!

[@RodneyJKemp]

Get well, great videos!

[@hnguyen481]

Cheers to speedy recover on that hand! 🍺🍺🍺

[@tlahuicolexiii2844]

Good teacher 👍

[@iveneverdonethisbefore8390]

1 month without a video? I hope everything is ok.

[@shawn2296]

the guys who disliked probably doesn’t know how to read a tape measure

[@hvacdoc2338]

B T Explain how this guy is a hack...

[@shawn2296]

B T lets see if you can frame a house by yourself in 30’days ill wait oh wait you cannot how sad keep your selfish comments to yourself

[@shawn2296]

B T nah but hey i enjoy it im sure others do too

[@mtzfig6756]

@B T according to you what does he do wrong for a house to last 10 years?? Just wondering.

[@walterperrault]

I am happy you are doing ok and on the mend we miss you bro

[@wilkinsoncarpentry6278]

Was only thinking recently, haven’t been seeing much from the CF, I know ya got an operation but I remember when all I’d do is watch ur videos lol so it’s been obvious that there’s nothing, so hurry the f**k up and heal hahahahaha let’s get another build series happening 🤙

[@sofakinggood5829]

I've been waiting for this. Thanks. My cost for lumber including pressure treated legs is under $80. I'm using pine. I would consider cedar but the cost might be high. Jim in Leesburg Virginia.

[@TheJimbob1603]

Missing your vids, my friend! Hope your recovery is going well. Jim

[@Thecrazyframer]

Thanks. My hand is almost better. I’ll start working part time and making videos this week .

[@eliezernegron333]

I miss that special word !!!!time for a beer 🍺🍺🍺

[@Ozaiger]

Круто!!! Рад видеть твои видео!!

[@Brando2501]

I have same pair of shoes, haha. Cool video man.

[@shaneball2358]

Well done

[@Allankho]

Glad to see you

[@dsawyer1441]

Good to see ya man

[@christopherking2260]

Just found you. Good stuff.

[@zacheagle3018]

I hope your hand is healing well miss the videos

[@stoffes]

We hope yo go full recovery soon!

[@mouradtahraoui1497]

Hi,I'm new her i love your amazing work man.I hope your right hand will heal very soon .

[@eliezernegron333]

Dude i can wait for u to come back ..hope u feel better ok man ..i miss the building video

[@ocmountainbiking9497]

Good shit might just try it tomorrow !

[@chrisbroemel5508]

Feel better, dude.

[@zachjohnston5948]

Hey crazy framer could you do a video on building saw horses please !!

[@wilkinsoncarpentry6278]

If you really want to see , go to RR Building page but you prob only wanna learn off CF so that’s understandable, they are really simple ones that Kyle on RR BUILDING does and I even made a set

[@Danny10Moreno]

Yeah, make some saw horses

[@zachjohnston5948]

Wilkinson Carpentry I love kyles videos I’ll check that out thanks

[@floydgath1149]

Very cool

[@Bannimann2]

What's up mate, hope your hand getting better. We miss your videos. Take care.

[@johnspencer1145]

Wish you the best with the hand I cut my finger on table saw n had tendon surgery and my hand has never been right do what they say n youll be good I was going crazy not working thanks for the video hope your better soon 👍🏻

[@legendaryjayy24]

Time for a beer!🍺

[@chivone21]

Thank you for taking the time to make this video, especially with your injury, but it was difficult to watch you fumble left handed with a misfiring low battery cordless nailer. I swore to myself 9 times. You have more patience than I do. I would have thrown that thing over the fence. Now I KNOW why I'll take the time to use my 150 psi compressor and nailer. I used a coiled hose so I don't have to screw around with 50 feet of heavy kinking hose. Get well soon. Then use your right hand when working, or you'll send a nail through your other hand and someone else will be making the video for you.

[@Tcody1997]

Hey Crazy Framer, i was wondering if u have a prefered brand of framing nailer? Which brands would u recommend that are good for the price and which ones do you find to be the most durable?

[@jaylouis8167]

Alright hosss ... its the thingamuhjigg .. thx bro

[@GS.9093_Mart]

I hope everything is ok man, i miss your videos. Hope you will be back soon

[@T.E.P.]

super great demo and great preparation. thanks for showing the thinking behind the jig. Was that a scooter @10:50? What is that?

[@LentilTea]

my favorite youtuber

[@vodoochilie38]

a brother have tried using the cast or brace as a bottle opener.

[@andrewbazel4520]

My biggest question is what gave you the inspiration to make a picnic table, was it because of the chair that you made last time?

[@davidbanwell7728]

What you up to these days hope your hand has recovered well. Anymore house projects coming up.

[@Llamadosalvaje]

Cool!

[@wilkinsoncarpentry6278]

Starting to casually think, “crazy framer ain’t done a vid in a while” hurry the fk up hahhaa nah hope all is well and we get a new series soon

[@ericdalbert133]

Be sure when you get back to work to be at 100% it would be a step back if your injury is ont fully healed ! Waiting for your new videos

[@artperez1213]

Take care of 🖐🏻 man get well 👍👍

[@Faruk651]

When will you be back ?

[@elmiguel1869]

Hey boss how are you doing just checking in you haven't made any videos✌️

[@Документы-д7г]

I wish you soon to recover the hand, bro!

[@jbll36]

Hello Cr Fr. Just wondering how your hand is doing? Enjoy the day . Ray L

[@Thecrazyframer]

It’s almost better. I’m gonna start working part time next week.

[@jbll36]

@@Thecrazyframer Ah good.

[@elmezcalero5770]

Is TCF a union carpenter?

[@maddog8651]

Get well 💪👍🍺

[@BlueFlyer21]

termite love

[@carlsnow2342]

was sorry to hear about your misfortune looks like you are doing better we all love the videos you make just make sure you don't rush back before you are good . that was very smart on how to build that jig thanks again get well

[@zhipingzhu9369]

Hello, Mr., I have been paying attention to your video for a long time. I am from China. Some questions want to ask you, I want to build a wooden house for my home like you. You are using thick wood and OSB size.

[@zippythechicken]

whos betting that things sticking to the table top :o)

[@crossova13]

I’m an Australian carpenter.. we need it in mm also !

[@GSMSfromFV]

Use this conversion table: __www.rapidtables.com/convert/length/inch-to-mm.html

[@pendulousphallus]

I feel like you could have converted those to SI units all on your own if you have internet access. He was gracious enough to provide the cut list, you can figure out what those dimensions mean in your preferred units.

[@richardvanbenschotenc9455]

When are you back on a regular basis

[@Thecrazyframer]

I just went back to work today. The videos will be back starting tomorrow.

[@ceedob]

Some people go to the park to put together a picnic. Now I’ll go to the park and put together a picnic table

[@bfarmer7]

Where are you homie? Is all good

[@jrand2631]

Everything's okay dude? You haven't been here, or on twitter or facebook for a long time now, we're beginning to get worried. Cheers.

[@donovanb4739]

Damn

[@Fizbini1]

I would named it 'cripple builds picnic bench jig"

[@endemiller5463]

persistent bugger!!

[@jeffro1245]

there it is LOL