HOW TO BUILD A ROBOTIC LAWN MOWER GARAGE

Here are the links for everything seen right on Amazon
Luba 2 Robotic Mower: amzn.to/3Vn6Ilv (there are various models for property size
Rock Housing: amzn.to/3XrcHs2 (various sizes, but model 111 should fit most robotic mowers. This is what I have, check measurements before buying)
Sheet Rock saw with multi-blades: amzn.to/3xk5eAj
Metal Cutting Saw: amzn.to/3XlkebS
Rock Dementions for model in video 32"D x 34"W x 15"H
3 lbs
RUBBER MAT: www.amazon.com...
This took me less than an hour and really came out and looks nice

[@dellki52]

🤔hummm..you think this will work with the Yuka mammotion robo mower

[@magicmortgagemike6226]

I would put it on the charger and measure from ground to top of highest point and see if it’s within the height of the rock. It should fit

[@lazyhexican]

Ya Probably wouldn’t be great for Yuka unless you built in more height by adding a 2 x 4 on the base sideways with screws… I like this solution but I don’t like the price…

[@lazyhexican]

I do know Yuka docked on the charger is roughly 32” deep (front to back) and Yuka is 20.4” wide and 13” high..oops I guess Yuka is only one inch taller then Luba which is 12” tall…This might great if $169 is a good price. Luba is 27.2” Long and Yuka is only 25.5” long…

[@dellki52]

I ordered the bolder and I will let you guys know how it fits. Upon looking at Yuka's measurements it looks like it may fit, but a tight height fit.

[@magicmortgagemike6226]

@@dellki52 when you place it on the ground, you should be able to shave off up to the roof with a solar, but you can also elevate the front a little bit if it’s coming in short, maybe put a couple of flat rocks or something it’ll work out