How To Build A Shed - Part 1 Building The Floor

If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Here is the Paslode framing nailer shown in the video: @
Here is a link to the full shed build playlist: @t
Shannon from www.house-improvements.com/shed shows you how to build a shed from start to finish. This episode shows you how to construct the base. See our other videos on wood framing for specific technique instruction.

[@HouseImprovements]

Here is a play list with all of the shed building videos from this project .kzbin.info/aero/PLh0KqGKtX4oU9z9ok2mtVO6cacPD_Mbw4

[@jonas3163]

Thank you Sir. Very helpful info. This is what I have been looking for. I will be putting a 10 x 10 shed on my unleveled property up in north central Michigan. Any advice will be appreciated.

[@FaithJRB]

Thank you so much for your expertise. Very helpful. 😎

[@infinitepowers6224]

You are really awesome! Thanks for showing me all in detail!

[@leftertiberiuvlad]

Kudos for the Video clip! Forgive me for butting in, I would appreciate your opinion. Have you heard about - Mahorrla Wooden Paradise Method (Sure I saw it on Google)? It is an awesome one off guide for building better sheds and woodworking without the normal expense. Ive heard some extraordinary things about it and my mate at very last got amazing results with it.

[@ezequielalvesdasilveira7262]

Dude could you release in your videos subtitles in Portuguese just set up please. follow from Brazil

[@HouseImprovements]

I have many people question the reason I installed the plywood the direction I did , In a typical larger floor you should install the plywood perpendicular to the floor joist using a T&G plywood or OSB. I wanted a PT plywood floor in this shed , PT does not come in T&G sheets (maybe special order ?) so to keep a nice solid plywood joint I turned the sheets so that the joint is fully sitting on a joist instead of having to add an entire row of blocking in the floor to support it. For a floor this size it was the best option for what I needed.

[@texasgurll]

Alright, here goes! I'm attempting this shed this weekend to house my chickens. I've viewed probably 50 different videos on how to build a shed and yours is by far the easiest for me to comprehend. Thank you for taking time to coach us newbies along! Wish me luck!

[@stephendavenport316]

+texasgurll how did it go?

[@chrisr.986]

Did u build the shed?

[@redsresearch]

?

[@brianmartinez7530]

Legend has it that he still building his shed

[@peterdominguez8527]

How are there 574 thumbs down? Anyway, great video, great explanation and thank you for NOT adding a bunch of useless commentary. Straight to the point and EXACTLY what I needed to see to build our floor for our new 10' × 14' Storage Shed😮

[@AprilWilkerson]

Wonderful video. So much information! I'm planning on building one soon and this has really helped. Thanks for putting it together.

[@buckyTheSerb]

Didn't expect to see your comment from the past here. :) Your channel exploded in the meantime!

[@mmm0513]

This was one of the first “building stuff” type videos i ever watched. Didn’t realize it’s been 8 years. I’ve built decks, fences, furniture, desks, made knives, carved handles for tools, made countless other things I can’t even remember. Crazy this popped up in my recommended videos. Thanks for the inspiration and a great video to show people how it’s done.

[@HouseImprovements]

Thanks for being a fan Matt!

[@adamphillips7072]

Thanks so much Shannon. By following your videos I've been able build my first shed! I hand nailed everything and it took some weekends over a few months but I got there. Of all the videos online your's are the best and easiest to follow..Thanks again.

[@robertesposito9871]

He is the best on the web at explaining steps and procedures, very informative

[@HouseImprovements]

Thank you

[@ianlangille558]

Robert Esposito 💯

[@michaeljames8218]

Robert Esposito Yeah. There are few things I like more than Ask This Old House And this is one of them. This guy makes me feel like I’m his Apprentice.

[@kevinconnolly1195]

Like to see you move the base now you have nailed the floor over your removable fixings...nice vid though

[@RedfishInc]

...and he's Damn sexy in those shorts!

[@zaheerjabbar5304]

There are other people on KZbin who are showing how to build stuff, but Shannon is much more detailed to the core, even to the smallest of things, he let you know. A real teacher. I have learnt so much from him and gain some confidence. Thanks again.

[@GreenmarkBuilders]

Nicely done! I like how you added the extra 4x4s to make a skid as well as adding support! Very well built!

[@symcardnel1741]

Needs to chop the bottom corners off the ends of those 4x4 skids so we can push that bad boy around the yard when we need to.

[@2075jman]

This video was so helpful. I think you do a great job explaining the process to those of us who know nothing about building. Thank you so much for sharing.

[@jooneemoon]

Great instructions and demo. You're a natural teacher. You cover every detail. Makes me feel like it would be a walk-in-the-park to construct my own shed.

[@2you24tube4]

My parents just raised the issue of building them a storage shed. I have some experience, but this is a great explanation for all steps. I knew about the corrosion, but GREAT tip to the general viewers about the corrosiveness of the materials (psi treated & nails). Can't wait to view parts 2+.

[@zepriderr]

Thanks Shannon, you're one of the best teachers on youtube!

[@tomscott8433]

Thanks for your easy to understand videos. Just as another commenter said, now I want to add a nail gun to my tool arsenal.

[@edshimkus1139]

Very well presented: clear, concise carpentry without time consuming unrelated bells and whistles. One minor addition: if one is, in fact building a skidable (is that a word) structure, it may help to cut both ends of the skids to create an upward curve much like the shovel of a ski or snow sled rail, which will enable the structure to skid along the ground without the square edge of the skids digging into irregular terrain. Thanks, Shannon.

[@HouseImprovements]

Many people have pointed this out, and yes if you are building your house run the plywood perpendicular to the floor trusses. I ran it this way so that the joint would completely sit on the joist so I could avoid the cost of using tung and groove plywood on the floor.

[@BossCrunk]

Nice, clean, no-nonsense presentation. Thanks.

[@crazyhorseranchaz]

ACTUALLY TELLS ME INFORMATION HOW TO BUILD CORRECTLY SINCE I'VE NEVER REALLY KNOWN EXACTLY HOW. I'VE BEEN GUESSING AT TIMES, AND THEN OF COURSE I AM NOT SQUARE. THANKS SO FAR

[@4ernoku4e]

Love the thorough explanations on all your videos Shannon.Thank you.

[@panzertiger7845]

Shannon does the best "do it your self videos" I have seen, and I have seen many from other guys, right after watching any of his videos I feel like getting my ass off of the couch and start building something, it's inspiring, thanks a lot sr.

[@jamesgraul]

You are a really good teacher! Thanks! Looking forward to seeing all your videos.

[@harjitsharma3832]

so nice you make so easy really help. thank you

[@happyhawaiian57]

Thank you for the GREAT tutorial, for someone who has never done this it was very informative! Explaining as you were doing helped to understand the process more clearly! Looking forward to Part II.

[@averybrewer6982]

i’m going to build a shed as a summer activity, and these videos helped a lot! thank you shannon!

[@chapperbone]

I would like to thank you for this video. Very helpful.

[@hendersonalfie6481]

when i built our shed i used a plan from *WoodBlueprints. Com* and it had all the blueprints, supplies, materials, and list well laid out for me.

[@underbelly8229]

Just getting into my 20s and started to pop my home hardware handy man build and fix everything cherry. Your videos are amazing man, learned allot!

[@mariolopezonline]

I have watched your videos from insulation to this, please keep them coming! Extremely useful

[@YellowJacketGroup]

Best video for shed foundation assembly yet. Looks very sturdy and straight forward to accomplish.

[@HouseImprovements]

I made my outside sheathing that is on the walls hang down over the edges of the floor. So I made the floor 1" less than what I wanted for a finished size because my sheathing was 1/2" thick.

[@justinvee6499]

@Humpty Dumpty haha damn 7 years ago his comment you replied to! I used to agree with you now i am unsure because ive seen many kreg jig screws that are very weak and easy to pull apart as opposed to a pallet with nails that is always super tough to take apart. What are your thoughts on that? Coincidence?

[@justinvee6499]

@Humpty Dumpty i used to agree with you but i think they both have their time for application. After all you dont frame a house with screws do you? Nails are more ductile to withstand the force of a hammer and screws are more brittle to withstand twisting forces. Screws tend to snap off and nails tend to get pushed out.

[@justinvee6499]

@Humpty Dumpty if you really are a structural engineer with 50 yrs exp. i value your opinion by the way. I am by no means an expert, just curious

[@justinvee6499]

@Humpty Dumpty i am living in quebec canada and there are impressive looking churches here all over the place. It must have been so hard to build they are enormous. Thats a very cool job you did! I am looking to build a small house in the near future so thats why im looking at building videos.

[@justinvee6499]

@Humpty Dumpty yes i would love to see more details like that thanks for the tips appreciate it. It really is amazing what was built and the methods used that are becoming forgotten. Much more beautiful than todays buildings i find.

[@dawei53]

Not sure what I can add to all the other complimentary comments other than to say it's great to watch someone at work, who knows what he's doing, does it well and can explain it in a way that even a novice, like me, can understand. Thank you.

[@raskel71]

I really appreciate your vids on building a shed, I used your vids as guidance for a 1st time shed build for a client. The shed come out very nice. Thanks

[@luisguevara3429]

Nice video. Thank you. That's a nice nail gun too.

[@HouseImprovements]

your welcome. Yes the gun is very handy

[@abduldoorani5211]

shannon i saw a lot up videos but i love the way your explain.

[@HouseImprovements]

Thanks

[@anthonyramos9706]

,

[@anthonyramos9706]

,

[@jakewalter3729]

abdul doorani first

[@Lucy-kg8ev]

just ordered the *WoodBlueprints. Com* guide for step-by-step videos and different plans to BUILD A SHED. they have some awesome plans in there

[@jimcswk1717]

A great video to help me with yet another project I have been struggling with. Thank you!!!

[@GalaXy808]

Hi Shannon, I'm learning, what ever in KZbin videos,but your video's are the besssst!!!!!!

[@travyb4608]

Love the thorough explanations on all your videos Shannon.They are like crack. Addictive

[@underbelly8229]

Travy B did someone say.. “crack”? 🧐😍

[@babuji198]

"like crack"?? ...you need help bud.

[@irimanatimu2327]

ITravy B

[@vickikpake7839]

Hi Shannon, Thank you for sharing your knowledge. I'm building a chicken coop and this was most helpful. Vicki

[@zac3183]

That’s not how KZbin comments work

[@matthew9802]

Great job Shannon , working and talking , you make it looks so easy , you are the best, thanks.

[@fishingtravelmusicandsport4002]

Awesome man! I just finished my pre-apprenticeship program and boot-camp and I almost carpenter union apprentice! And I hope to get a job soon and start working like Finish Carpenter. Your lessons very useful for me! Big lk , Max, Seattle WA

[@kennethsee6262]

Union wages too high in a competitive market but that's OK means more customers will choose the non-union labor based on quality and price no I am not gonna put up over this much work cut the union will frown upon it

[@rubenrobles1162]

Nice video, I found it very useful. This was easier than asking some one 'how do you'.

[@elsieross4684]

If You Want To Build A Reliable Shed, You Need Knowledge of Foundations, Piling, Planning and More ... So I'm giving you a comprehensive "how-to" guide on the basics of woodworking. Go here ==> *WoodBlueprints. Com*

[@jbuddyman]

That's some good carpentry skills man! awesome!

[@elsieross4684]

Guys I am learning woodworking shed plans at *WoodBlueprints. Com* I recommend this website all you guys who are beginner or advance in woodworking

[@ellpat2928]

I’m loving this video. Such detail. Thank you I’m learning so much.

[@HouseImprovements]

I have found they need a little more love than a air powered gun but I love the convenience ! I clean mine about every 10-12 boxes of nails and have very little trouble.

[@hebertheberthebert]

Hi, great video! Do you have a video made showing the different ways to sit that cabin on actual ground? how to level everything to start building? thanks

[@robertcaneday2930]

Thanks for not glossing over the details, helps a lot when you don't know what the hell you are doing!

[@kizunadragon9]

I'm buying my first shed and putting it together myself... Thanks to videos like this I might actually have a chance of getting it up correctly, thanks!

[@sayiangod9404]

Thank you Shannon! Glad I found your channel, great info for the novice builder lol. Keep up the great work!

[@benher2282]

Very clear instruction. Thanks. Nice Wisconsin accent too. Houuse.

[@DustinGrahamCA]

+Ben Her Yea! Loved the accent. Ugh all the spam replies to your comment.

[@OoavastoO]

He's Canadian. The give away would have been the Team Canada Hockey hat he's wearing. That and it says Canada in his profile.

[@SkilledEddie]

I see you installed the plywood parallel with the joists. I was trained to attach plywood perpendicular to the floor joists for a stiffer floor. This applies to the roof and walls too. The grain running in opposite directions makes a stronger construction.

[@HouseImprovements]

Yes, as mentioned many times in these comments I did this because it is only a small shed and I wanted the plywood joint to land on the joist to keep the floor solid and not have to add blocking under the joint between every joist if it were turned the normal direction. You are correct though, in most cases it should be run perpendicular to the joists, and I should have mentioned that.

[@bosantamorena]

HouseImprovements

[@JohnCurtisE]

HouseImprovements I was wondering the same thing. soon as I saw you do It, I checked the comments section lol

[@robertsalas3984]

Is a fucking shed

[@Cavediver86]

You are absolutely correct. As the instructor mentioned it was for ease because it's only a shed but that definitely should have been explained in the video because more often than not the way the plywood was laid is really wrong. I've seen people lose their jobs over this.

[@cwc8979]

Shannon is a awesome Carpender, Thanks Shannon for all the videos you do to teach us how to build things ourselves!!

[@windsorpatb]

ideal video explanation. No excessive chatter. Straight to it. Thanks very much.

[@davontaylor6833]

Thank you you have finally made me understand what tf I’m doing haha

[@victoriasoto6789]

About how much in materials do you estimate a 12x 10 shed would cost?

[@TheDjswift23]

Is the a materials list ?

[@marjonaguila1112]

Hi I'm Marjon from Toronto,Honestly until now i can't imagine that i build a nice deck in my backyard this is the first time in my life to build a deck .And i learned a lot since that i watching for Shanon video it helps a lots.Very clear to explaining everything.Thank you be safe always and God bless.

[@stitch_u_ation]

Thanks so much Shannon I have been watching your videos for ages now and have learned oh so much and I was just in the market for building a Shed -- You are wonderful and I can't say enough about how easy you make it to learn and understand. AWESOME Shannon keep up the great work.

[@The247th]

Alright, I feel its time I invested in a nailer. How good is the Ryobi P320 for projects like these? What nailer would you recommend to a weekend project warrior?

[@HouseImprovements]

That Ryobi P320 is only a 18 gauge brad nailer, no good for framing. The paslode framing nailer I use in these videos is a good nailer but may be a little pricey ($500) for a weekend warrior. If you already own a good sized compressor then a air powered framing nailer would maybe be better

[@The247th]

HouseImprovements I understand the bigger the better, but what size air compressor would you say is sufficient for a project like this? BTW Thank you for taking time out to reply to your viewer's comments and for uploading honest simple informative videos.

[@kauired]

Hitachi nailer..Their the best. You can find a 3 pack combo kit at Lowes or Home depot.

[@mikemetheny1086]

Would also like to know what size compressor would be good. I have a PC pancake compressor, 150 PSI that works well with the little nail gun that it came with.

[@jlharland01]

Mike Metheny I bought a whole "set" of Stanley-Bostich nail guns & a 150 psi pancake compressor on eBay for around $700. All items were "reconditioned" and sold by various retailers, I didn't buy anything from private party's. Anyway, for my $700 investment, in addition to the compressor, I got a framing nailer, 18 ga brad nailer, stapler, finish nailer, and another smaller brad nailer (don't recall the size, smaller than 18 ga, tho). As I said, all were "reconditioned" Bostich products; some arrived in the original plastic wrap as if they had never been opened. A couple of items had some very minor scratches that I really had to look for to find (and I looked everything over VERY carefully!). They were purchased from at least 3 different sellers, and everything has worked perfectly. It was a great investment for my weekend projects. So, take a look at eBay, you'll find some great deals.

[@murrdoc321]

This question may have already been asked but how much did this building cost?

[@jollyandwaylo]

Just make up a list of materials and give them to your local lumber supplier. They will usually give you a better price if you bundle it all together.

[@stephenphoeung4196]

Great instructional video! Thank you for passing on your expertise. Peace.

[@jjmcq2327]

I like the Lag screw Idea! I have had to move plenty of sheds with my Skid Loader!

[@PedroJohnston1]

Suddenly, i need a nail gun.

[@troyna77]

and dont forget the impact wrench.

[@DaBrute]

And I just realized I need a cordless saw

[@gingercatf1mk2]

I ordered one within a day of watching this :)

[@TheClaudos]

+Chris Blaylock How much did your nail gun cost and what model is it? Just curious.

[@anthonyramos9706]

dfbdfb

[@Spoons7414]

Wow you could see the sparks from when the nails were shot into another nail. I'm shocked the camera picked that up.

[@357mat1]

+MickLawless the guns do that anyway

[@eyleyley5380]

.

[@buggsy5]

Yep. It was the anvil in the nail gun hitting the nails that caused the sparks.

[@SteveFrenchWoodNStuff]

Those sparks are from the gun's striker hitting the nail head, not from the nail hitting other nails.

[@v-ivanlagranja]

Merci beaucoup , de tres bonne videos, I learn every day with you, Salut from Montreal ...

[@teedtad2534]

This guy has the most EASY way of shed building so far from others................ ✅⭐⭐✅

[@11jeopardy11]

when you look at the camera i feel you staring into my soul

[@sherpaderpdingo3405]

"nails are stronger than screws" -pardon?

[@RodneyFisk]

+sherpaderp dingo Nails have stronger shear strength, so they are more appropriate for framing. Screws are more suited to attaching things that one doesn't want to pull off, of which decking and siding are two examples. I personally prefer nails for the whole job, but that's just personal preference.

[@sherpaderpdingo3405]

Rodney Fisk I've used both. With framing I find it way sturdier with screws for whatever reason......like when I pull or hang on it (for framing, for example) it seems more stable. I guess whatever works.

[@55tumbler]

+sherpaderp dingo no there not

[@gw2reaper923]

+sherpaderp dingo lol i was thinking the same thing. nails are just easier. screws are so much better for holding shit together in the long run. nails tend to loosen and you often have to renail or screw and glue later anyway.

[@WaterGruffalo]

+sherpaderp dingo He's correct. He's not talking about the withdrawal (force required to pull the screw/nail out). He's talking about the shear force, or the force perpendicular the screw/nail. Screws are typically more brittle to their nail counterpart, but hold on a lot stronger.

[@ktfoent]

Man thank you so much, I learned what I thought would take a school year in 25 mins, I can now frame and build the floor

[@osirissifuentes]

Sir you made it so easy to understand tons of tips .Awesome video ... You da MAN !

[@robbyjunior4368]

I've always tried to figure out how to build a shed for my kids. I tried several plans but always got stuck along the way. I'm glad I found this Ryan's shed plans [ Go Here >>> *WoodBlueprints. Com* ]. It has made the work become as easy and simple as I never thought it will be. Thank you Ryan!?

[@parisoglesby5231]

Anyone else here from Grayson's Snap?

[@clevelandoklahoma5899]

Bo

[@aztekwarrior518]

nails are not stronger than screws

[@jasonmorehouse3756]

in shear strength, they are.

[@kennethsee6262]

Twist shafts nails just as good

[@kennethsee6262]

@@jasonmorehouse3756 yes you are correct

[@lamnag01]

Hey Shannon, I have to echo Adam Phillips comment. It was my first construction project and it turned out pretty well according to the neighbours. Your video regarding the foundation/Base was the key to it's success, Many thanks ...Liam.

[@stevenraeburn8178]

Great video - I'm a fan after watching the first 2 - great information and very interesting.

[@gr8freediver]

You rock! Thank you very much for all the videos, they are great and very detailed!

[@jonesconrad1]

Nice video Shannon, well explained and concise as always

[@D700Replacement]

For an 8x12 shed I'm not sure which way to go for the floor. Can you give your opinion on two options... A) 2x4 laid over 3 posts on levelled concrete blocks? B) 2x6 over 2 posts with 12" over hang on the sides (which leaves a 5.5' span in the middle).Fantastic series. I'm so glad I came across "House Improvements" channel. The presentation is awesome and quite professional.

[@deannam1981]

this is 2 years too late but whatever. depends on what you're planning to put in the shed (always build bigger than you need). a riding lawnmower? i'd put 2x6 on wood posts or concrete blocks. i love this channel too!

[@jasonwright6720]

Gotcha, thanks! Watching video number 2 now! Realized I would have been a mess without your great videos!!! Thanks for all the help!

[@broken1965]

I used the Pasload first gen when it came out very expensive back in 1988. it was just as big as the 1 in video. I used it for pocket door framing plumbing build outs missed dead wood for drywall, kitchen drop ceiling farming wherever air compressors weren't lol

[@beautifulsunrisesandsunset9066]

Thanks for making a complicated hobby seem easy!

[@fredrezvani1913]

This video, as well as others posted on their site, are very informative and when narrated. Extremely helpful. I am planning on building a shed using the tips, means and methods implemented in these tutorials. Kudos and thank you. You are a master craftsman. Keep the videos coming.

[@HouseImprovements]

Thanks Fred, glad you like our channel/site. please pass the word to everyone you know. thanks again

[@VLIANTONO]

Thank you so much for showing this video. I have been eager to build my own Shed. I will follow your video and build one soon.

[@flybeep1661]

Looking to build myself the frame work of a tiny house on wheels. These vids are gold for this.

[@CBRMain]

This is a very good show. I thank you for posting it. I would like to suggest that you consider filming a show on "how to repair a leaky outdoor faucet."

[@jordanstranger8606]

This video just saved my life. Thank you!!!!

[@cacadodo666]

prolly the most straightforward tutoria. Thx!

[@esszee7344]

I like all of your videos, very informative, and best of all a humble and wise guy. Keep up the good work. God bless you.

[@michaelyackovich155]

Like watching paint dry but I LOVE these videos, learn something new every time I watch these kinds of videos

[@macgyverb.4307]

i'm a french canadian ( in Québec) and i used all he's videos to finishing my basement and now its shed time and love he's video , simply to understand , explain very well each step carefully .

[@HouseImprovements]

Thanks MacGyver, good luck with the shed

[@mikemeyer7563]

*The secret is in following proven shed plans, step by step guides and detailed blueprints. This is closest thing to hiring a full time 24/7 carpenter working on your projects that you'll ever find..* Go here => ---shedplans.drmcstuffin.com---

[@VinnyMartello]

I’ve been wanting a shed at our new house. The ground is all very hard and flat at our property. This video is great

[@russellrogers9439]

Really great video, thanks for posting!

[@reempire888]

Shannon, you're the man! best videos on KZbin hands down!!!

[@Lambdamale.]

Had no idea it was this simple. Thankyou for this series.

[@MrJlima5]

Great job Shannon, great videos!! Learn alot from you.Thank you

[@Trapper3000]

Thank you Shannon. Great video. Looking forward to seeing the follow up videos.

[@hangnailmaster]

I really like your videos. Very informative and your a good teacher. Keep up the good work!

[@b2a15837]

I just wanted to thank you for your site. It's a great help. And, Shannon looks like a great guy! Thanks!!!

[@HouseImprovements]

Thanks for watching and commenting

[@zinkoaung924]

Hello everyone, I've been studying constructing sheds and discovered a great website at Wilfs Shed Formula ( I found it on google)

[@radkavrbkova2823]

So great that even I could build a shed! Thank you!

[@jonas3163]

Hey excellent instructional video. Thank you.

[@RTSFoto]

Thanks Shannon top quality instructional video, cheers mate.

[@RedfishInc]

This is one of the best tutorials on the KZbin.

[@robertporter624]

I purchased a Porter-Cable compressor/3 gun (finish and brad nailers) combo and purchased a bigger nailer separately for 3-3.5 in ring shank nails with heads. Best tool purchase I've made. Have had them several years and see the same set always for sale. This is my recommendation.