The Basics of Framing A Basement Wall

[@quinnyjohn2times]

Why start at 15 1/4 on the framing?

[@DoingWhatever]

It's a little tricky to imagine it but I promise that if you lay it out like this you will end up with studs 16" on center lol. So the first stud will be flush with the start of the bottom plate. Then measuring 15 1/4" off the start of the bottom plate will give you the leading edge of stud #2. Center to center of the first two studs will not be 16", but the sheet of drywall will not be going to the center of the first stud, it will be going to the edge of it/start of the wall. So from the start of the wall to the center of stud #2 will be 16". Then it's 16" OC from that point on. I hope that makes sense 😃 Kind of tough to explain in text lol.

[@jgraham007]

Thanks for the explanation. I was wondering the same thing.

[@vidsbyme2590]

@@DoingWhatever I think I need a show only on this. Lost me after "It's a little tricky".

[@DoingWhatever]

I get this question quite a bit - I probably should make a separate video on just this part 😃

[@SpotLightHealing]

​@@DoingWhatever 😮😮🎉😊😊

[@OldCemeteryWalks]

Finally, a video that takes the time to explain what's being done without speed ups and horrible music. Absolutely perfect!

[@DoingWhatever]

I really appreciate it, thank you! Glad it was helpful!

[@Brewsy92]

Can't agree more with the comments saying this was perfectly shot and explained, and shown. Thanks for not wasting time showing every cut or action, but not missing anything.

[@DoingWhatever]

I really appreciate it 😃 thanks for the positive feedback!

[@DoingWhatever]

Wow, thank you 😃 I really appreciate it!

[@dehny4982]

@@DoingWhatever do you need a building permit for this?

[@DoingWhatever]

I would think in most places you would - I definitely needed a permit for this work. Check with your local building inspector if you are unsure.

[@lifehappened8216]

Dude, you just explain marking wood in a way that watching a thousand videos didn't. I finally get it. Thanks.

[@DoingWhatever]

Glad I could help! 😃

[@AsIronSharpensIron]

Young man, I have to tell you that there are 3 problems with this video. 1.) The video was way too short. 2.) I could only give it one thumbs up. 3.) I wish I could email you a beer. THANK YOU for the great tutorial. You did a wonderful job! Happy New Year.

[@DoingWhatever]

😂😂 I really appreciate the awesome comment! Comments like these really encourage me to make more videos like it, so thank you! Happy new year to you as well!

[@이니S]

​@@DoingWhatever 나무토막

[@helnbak9372]

Great!! Thank you. I’m very much a beginner and I’m really wanting to build a wall for my cat enclosure. This video was exactly what I needed. 😊😊😊😊

[@micheljarry327]

At age 68, I’m just starting a first ever DIY basement project on our new house. There’s no word to thank you for your clear and competent instruction. Your teaching skills are as impressive as your carpentry.

[@DoingWhatever]

I really appreciate it, thank you! Good luck with the project!

[@RightPathOnly]

@@DoingWhateverits amazing what we can learn with youtube I started my carpentry career around 25-26 im 33. Learned a lot, its a trade for me although I own and operate a GovCon company I do my own framing and family/ friends

[@ariccb]

I love that you took a difficult wall, with many things to consider, and made a video out of it. The camera work and the extra close views of you marking it out was what i was missing from all the other video's i've seen. I know it must take a load of extra time when filming it initially, but the quality of instruction leaves NOTHING to be filled in with guess work, so THANK YOU!

[@DoingWhatever]

Glad it was helpful! I really appreciate the awesome comment!

[@jwhillyer]

I completely agree. Excellent views and angles for all of us to see the construction work up close.

[@TallKulWmn1]

Thank you. I’m a 63 year old female, brand new to carpentry. I’m building a chicken coop to practice what I’m learning. Almost everyone has words of wisdom & knowledge to share. You have found a way to put it all together, spell it out simply & I come away with confidence. Marking top & bottom boards simultaneously was a Doh! moment for me. I really appreciated it tho lol

[@DoingWhatever]

I’m so glad to hear this was helpful! That’s great - I think it’s awesome that you are wanting to learn new things and taking on a new challenge with a chicken coop! Good luck with the coop build!

[@rushmuzik]

You have a natural gift for explaining Construction to a just about anyone.....

[@DoingWhatever]

Thank you, I really appreciate that 😃

[@davidhanni208]

This is absolutely flawless video for a beginner. Simple and too the point !

[@DoingWhatever]

Glad you think so! I appreciate it!

[@katiemcauley2378]

@@DoingWhatever this is the best video i've seen on the topic, looking to add a wall in an already finished basement. picked up a lot of solid info here! thank you!

[@DoingWhatever]

Awesome! I’m glad to hear that! 😃

[@bluehannah8696]

Thanks!

[@DoingWhatever]

Wow! Thank you so much!

[@tdebrum123]

When building a wall its a good idea to crown the studs,so your drywall isn't wavy,great video.

[@DoingWhatever]

Very true, thanks!

[@jasonkernjr5343]

What is crowning a stud?

[@patriciamitchell5114]

Yes, what is crowning a stud??

[@tdebrum123]

When building walls, interior walls, install studs so crown of 2x4s are in the same direction so your walls aren't wavy.

[@snorlaxTACO]

Wow! Thanks for explaining the stud measurements. I watched so many before finally understanding it for us dummies 🤣 with your video!

[@HipChey]

I love this. I need to frame a couple walls in my basement and now I know how to do it!!!!! I’ve assisted many times but never done it solo. This was exactly what I needed to see.

[@DoingWhatever]

Glad to hear this was helpful! You can do it!

[@michaelescalante7718]

this may be boring for some people bt for me this a perfect video for me to watch as I am moving forward to becoming a carpenter apprentice, thanks for this vid man

[@DoingWhatever]

Awesome - I’m glad it was helpful! Hopefully I didn’t put you to sleep 😉😂

[@ToolsPlus-z7k]

I have only been framing for 45 years so I don't know everything. BUT this works for this guy. I do NOT do it like that. I always stager the butt joints when doing the floor plate and top plate to make it stronger. I also make an L at the ends for nailing drywall. I measure completely differently. Again, what this guy does, works for him. BUT professionals do it differently.

[@RightPathOnly]

How do they do it and where is the regulation?

[@anthonycahill5220]

1.) Yes staggering bottom/top plates make the wall stronger. 2.) The L your referring to is called a California corner and they are the best way to frame your corners ( Especially when installing insulated walls with electrical ) 3.) Instead of marking my first stud at 15 1/4” then moving the tape to continue marking I just leave my tape at the end and mark 3/4” before every “red stud” mark on my tape and put an X on the right side of the line. It’s better to stay hooked on something instead of trying to hold your tape at that first 15 1/4” mark.

[@JayArneson]

Then it’s pretty clear this video isn’t for you if you are a professional.

[@naurm.a4686]

So hard to find people who work with reliable knowledge and workmanship intregrity. Very informative tutorial. Thank you.

[@lukewright9533]

This is so much nicer than a boss yelling at me and getting frustrated because I don’t already know all of this. I learned a lot thank you.

[@DoingWhatever]

haha! well I'm glad to hear that!

[@garytomlinson7665]

This guy is a good teacher.

[@DoingWhatever]

Thank you, I appreciate it!

[@MichaelBrown-vq4fd]

Only video I’ve seen that showed how to add the supports for when your wall doesn’t align with studs and joists. Much appreciated. Gonna build some partition walls this month with a bit more confidence.

[@DoingWhatever]

Awesome, I'm glad to hear that! Every little tip helps

[@meilyn22]

This is the best video on wall framing I've watched! Great video, dude.

[@krob7955]

This is fantastic reference material. Addresses adjustments, obstacles, and accommodations I’ll have to deal with finishing my basement. Really appreciate how you explain what and why you’re doing something and thinking ahead to drywall. Fantastic! Thank you for creating and sharing!

[@DoingWhatever]

Awesome, I'm really glad you found it helpful!! good luck with the basement build 😃

[@CorrectCaulking]

This video offers a clear and concise tutorial on framing a basement wall, providing viewers with the fundamental knowledge needed to undertake this common DIY project. By breaking down the process into easy-to-follow steps and offering practical tips, the video empowers viewers to confidently tackle basement renovations. It's a valuable resource for homeowners looking to expand their living space or enhance the functionality of their basement.

[@smiltastic]

Just came for some reminders but man your videography is actually really well done. Everything is easy to see, small technicals as well as the overall picture is very well outlined with how you have your cameras positioned.

[@DoingWhatever]

thanks for the feedback, I really appreciate it!!

[@shannon8488]

I am building a closet in our basement and this will be the first time I have framed anything. I really appreciated your explanations of the blocking issues.

[@DoingWhatever]

Glad to hear it was helpful! Good luck with the closet build!

[@patty109109]

I’ve framed a basement with pre making walls on the floor. It’s got its pros but you need to consider undulations in the floor which mandate careful measuring lest you find you have a wall you can’t get into position. If the floor is wavy at all or too much junk on the ceiling I prefer to pre set the bottom plate, then the top with a plum bob, and individually attach studs.

[@lthrneck7118]

Excellent video. Straight forward without any hype or "look at me" nonsense. Thank you.

[@DoingWhatever]

Thank you, I appreciate it!

[@earthangel8875]

I appreciate the time you took to make this video and share. Angel from The Bay

[@DoingWhatever]

Thanks! I hope it was helpful 😃

[@jasonleteff5371]

I’ve been a carpenter for more than 25 years and I’ve had to teach many people how to do things, I’ve hired many guys and had to train them, my son included, and realized quickly had bad I am at giving instruction. You’re a goddamn pro at showing the process. I REALLY like the subtle little hand and finger gestures showing this or that. Perfect.

[@DoingWhatever]

Well I'm honored, thank you for such a kind comment! I try to show people the process and how I think and go about it - I'm glad to hear it helpful 😃

[@FairchildV]

This was pretty dope! I plan on remodeling my basement this spring/summer and your video on how to frame a wall is just… phenomenally easy and straightforward! Thanks for being so helpful.

[@DoingWhatever]

Awesome! Thank you! I really appreciate the kind words :) I'm glad you found it helpful and I hope the basement remodel goes well this upcoming spring!

[@robertwinter8827]

About to move back to WI, and a lot of new home builds will be plumbed for a basement, but not finished. This is a perfect example of the kind of video that younger guys need to watch to finish that basement themselves. Projects in your garage or in your not-yet-finished basement = awesome.

[@DoingWhatever]

I really appreciate it, thank you! I’m here in Wisconsin as well - best state out there! 😁

[@heatherkatt3768]

i'll be building my first wall, this is the only video that mentions needing treated wood when it will be against concrete. super glad i watched you video. thanks for the help!

[@DoingWhatever]

Yea you'll definitely want/need treated wood when in contact with concrete. I believe it's code in most places lol. Glad to help!

[@RightPathOnly]

Ill be honest with you. You must be very new if you dont know you need treated wood against concrete or in basements in general lol but welcome to carpentry…a real Mans trade…

[@jackryder6732]

Very rarely you find a video which is more showing how to do rather just talk after its been done. Great video. Just subscribed your channel

[@DoingWhatever]

Awesome, thank you! Im glad the video was helpful 😃

[@lorebeth]

Articulate, easy to follow and very informative, which is the whole point of how-to videos, or at least it should be. This is exactly what I needed, thank you.

[@DoingWhatever]

Wow, thanks! I'm glad you found it helpful 😃

[@arleeni3819]

What a simple brilliant way to measure wall studs, saves time and all so accurate..... Bravo

[@DanieVacz]

Super easy to understand. I like how you have a stand for your camera. Some KZbinrs carry their camera while doing the walls etc… makes it confusing to understand what they are doing. Subscribing :)

[@DoingWhatever]

Awesome! Thank you - I really appreciate it 😃

[@MrBigKid]

Excellent video, showed me everything I need to know! Appreciate the tips and attention to detail.

[@DoingWhatever]

Glad it was helpful! and thanks for the kind comment!

[@Andi.Mitchell.Designs]

Thank you for this. We are waterproofing our basement now and then will be turning it into 1200 sqft of living area and this video does a great job showing and explaining some of the intricacies of framing rooms. Keep up the great work. Thank you again.

[@DoingWhatever]

No problem, glad it was helpful! Good luck with the basement project!

[@AmandaJV248]

This is the best wall frame video I've seen - thank you for the detail.

[@DoingWhatever]

Wow, thanks! I really appreciate it!

[@jeffhorner5197]

Perfect for what I was looking for. You know your stuff, and you're really articulate in your demonstration and explanation. Definitely subscribing and coming back for more. Thanks!

[@DoingWhatever]

Great, I'm glad to hear that! I really appreciate the kind comment and thanks for subscribing 😃

[@ToastyCoronet]

Same here, really great video. Makes it seem a little less intimidating for someone like me who has never framed anything.

[@DoingWhatever]

Awesome! I’m glad you found it helpful! Good luck with the project!

[@majscrap2629]

Best video on the topic yet! I liked the tip of stacking the stud and measuring up! That's great!

[@DoingWhatever]

Thanks! I really appreciate it!

[@Jaredxstp]

I’m getting ready to attempt to finish my unfinished basement this winter with zero experience and gonna go based off this video out of all videos I watched. Your video has helped with the intimidation factor so thank you for making a easy to follow video! Also gonna go buy a ramset it looks easier and faster then using my hammer drill.

[@DoingWhatever]

Awesome, I’m so glad to hear that this video was helpful! Good luck with the basement build out, you got this!

[@Defenderofthefaith-o8z]

I love this video. I like wood framing. Construction is beautiful. Building things. Nice.

[@DoingWhatever]

Thank you very much! Glad you enjoyed it!

[@amdistant5547]

Good tutorial ! Always wondered how the first wood was "nailed" to the concrete and now I know.

[@DoingWhatever]

Thank you - glad it was helpful!

[@dixonbidenzmouth4115]

You can also use cut nails

[@Sunny21019]

Thanks!! I learned about the Remington tool......... This was very helpful, I have concrete floors throughout the house.

[@DoingWhatever]

Fantastic! Glad it was helpful!

[@daverunion9044]

Hey, I really want to thank you for this video! I'm in the beginning phase of doing the same thing in my basement, to make an isolated room for a work shop. I've never done this before, and was a little nervous about where to begin, (& then what to do, lol), but your instructions are fantastic, and I'm feeling more confident about taking on this project ... I know; it's kinda crazy, but I'm 59 years old, and I've never done this kind of thing before. Guess I'm just a late bloomer lol. Anyway, I really appreciate all of the time and detail you put into this video, and let you know how much it helps.

[@DoingWhatever]

Man, thank you, that means so much! I really enjoy making videos like this and sharing the information I know with others in hopes of helping them out. So it's awesome when I get feedback like this! I don't know it all, but I know enough to get by and hopefully give the next person a good starting point to go off of. Good luck with the project and I'm sure it will turn out well!

[@SkippyRo]

One thing I didnt see in the video was how to determine the crown of the studs and how to line those up. Maybe that's in a different video, I wouldn't know. Thank you for your time in making a 15 minute project into a half hour tutorial for our benefit.

[@TheDavidGoldmanphoto]

Super helpful, I like how clear and communicative you are. The whole marking forward although perhaps obvious to most was really helpful for me.

[@DoingWhatever]

Wow, thanks for the awesome comment! I’m glad it was helpful 😃

[@kyle_wagner_music]

Excellent tutorial! You gave a clear demonstration of the whole process, with explanations of why each step was taken and the concerns that might be used for each (the treated lumber for any contact with concrete, the extra blocking/studs for drywall, that jog that was necessary for the door).

[@DoingWhatever]

Glad it was helpful!

[@ZacharyPittman]

We just had to build a wall for some stage stuff at my church. One thing that I learned that I never thought about was to place the bow of studs in all the same direction so you don’t have big warp between two studs. I don’t know how often that matters or is practiced but it seemed to make sense. Disclaimer: not at all a framer or professional here. Lol.

[@DoingWhatever]

Correct, that's definitely good practice to do. I forgot to mention that in this video so I appreciate the tip! Thanks!

[@tomthumb5445]

You are way ahead of what I need to know. I looking for the outside corners at the wall framing, not the last bits.

[@AlaskaWild]

Excellent explanation while building!

[@DoingWhatever]

Thanks!

[@reignsray9686]

Thank so much!!! I have spent hours trying to find this information. I am kinda just the facts kinda mama and your video is just that. What you need, how to do each step what to think about in future steps that impact what you do in this one. Easy to understand no intimidating number blah blah (it is what I hear when men talk) super excited as I need to build a outside space to house and protect the tools I am collecting. Thanks again

[@miac.4806]

This was such an amazing explanation for framing, thank you so much. I feel so confident in attempting to frame my basement.

[@DoingWhatever]

Wow, thank you! I’m glad to hear that! Good luck with framing your basement, I hope it goes well 😃

[@juanolague4770]

I’m a dock builder so cuting and nailing is pretty much the same. But that 15 1/4 than the rest of the studs at 16x really help out a lot. Also the way you mark your button stud and top stud really help out a lot. Thank you for such a GREAT video my guy.

[@franka2817]

Great video! Very easy to follow and very informative for someone who has never done this before like myself 😊

[@DoingWhatever]

Thank you so much! I’m really glad to hear it was helpful!

[@jimbobdoesburgers]

Really well explained, thanks - I'll be looking forward to framing out my garage for an office conversion!

[@rushie84]

Great video! I am working on my basement and this is perfect

[@DoingWhatever]

Awesome! Thank you! Good luck on your basement😃

[@JCuervo330]

🎉 love the speed, lack thereof, in this video. Extremely well done for a DIY learning before doing

[@DoingWhatever]

Glad you liked it! I appreciate the feedback!

[@greygoose117]

Why didn’t you frame around the window on the back wall?

[@DoingWhatever]

I like to frame the walls and stand them up first, then cut in the windows afterwards. That way I can cut the opening for the window in the wall pretty much perfectly, instead of relying on getting the measurements for the openings perfect when framing the wall. If that makes sense lol

[@elmst6775]

It does.... subscribing

[@DoingWhatever]

Awesome, thank you!

[@tonymarr6993]

It does

[@fisforfriendship6093]

i learned having a l24 to 48 inch level is very useful land that using it instead of guessing or eyeballing is the way to go always. but no really as a laymen i learned and recalled a lot of very useful information saved to a playlist incase i forget

[@dallaslee8900]

Awesome video just what I was looking for as I'm getting ready to finish our basement.

[@DoingWhatever]

I’m glad it was helpful! Good luck on the project 😃

[@isaacgonzales3347]

Only 2 nails per stud, should be 3, you didn’t crown up all the studs, never put hand behind nailer, stand on stud when nailing, only 3 screws on ceiling ladder backing should be 4, I could go on but you did half way decent for and amateur, carry on kiddo 😊

[@detaileddayseventdesign]

How many times can I like this video!?!? 😩 whoa!!!! Thank you!!!

[@DoingWhatever]

Hopefully an “odd” number of times 😂 I’m hoping it was helpful?!

[@lesjacobsen8459]

Great video, very informative. Really answered a lot of questions I had and has given me more confidence in doing this project.

[@DoingWhatever]

That’s awesome, I’m glad it was helpful! Good luck with your project!

[@jbspillman]

How did you determine the vapor gap distance from outer wall to frame? Also, how do you know what kind of protection to use in the gap?

[@DoingWhatever]

1/2" air gap is fairly standard. You typically see a line offset from the face of the concrete wall 4" and the wall framed with a 2x4 leaving that 1/2" air gap. this is plenty of space should you develop a bit of moisture in the air gap - it would evaporate without causing any damage. As for a vapor barrier, that will depend on the region you live in and the local codes as well. I would suggest digging into the codes or calling your local code person. Hope that helps!

[@lauramcinerney1147]

This was perfect and very helpful. Loved how you explained everything.. great job. Now I can do mine with confidence

[@shaunbecker6492]

Great video! Very helpful! I noticed you used screws to anchor the wall to the ceiling (floor joists), I was told using nails allows for some play with seasonal temp changes. Is there a reason people use two bottom plates?

[@DoingWhatever]

Thank you! I'm glad it was helpful! Using nails to attach the top makes sense, didn't think about that aspect. sometimes the nailgun knocks the wall out of alignment so often times I would use a few screws to pin the top of the wall in place and then follow up with a few nails. sometimes people use two bottom plate to hold the gypsum board off the ground that much further - that way if you were to get water in the basement, hopefully it isn't enough to start soaking into the gypsum board, therefore less damage overall. just need to have tall enough trim to cover that extra gap at the bottom.

[@robertbest6858]

Great video, I'm building a frame for an rv and alot of this is super relavant. Glad you made this video

[@DoingWhatever]

Glad it was helpful!

[@thelmawebb9511]

Excellent video for a beginner getting ready to frame for a small bathroom. Thank you

[@DoingWhatever]

Glad it was helpful!

[@steverogers2603]

This is the best video on this I’ve seen. I want to build a similar wall so especially apt. Keep making videos.

[@DoingWhatever]

Wow, thanks! I appreciate the support and encouragement 😃

[@mikefargo4339]

Framing basement walls, requires "floating" walls by code. This is to prevent the water table from lifting up the slab and displacement of walls, that would be transmitted to the upper floor above.

[@DoingWhatever]

Only in a few states in the US. I believe Colorado and Wyoming, but be sure to check with your local building inspector if you aren't sure.

[@vicentesaraiva5258]

I wish I had watched your video prior starting my drywall project.

[@DoingWhatever]

Next time!

[@ericawilliams18]

Great video! Truly a beginners guide ! Thank you !

[@DoingWhatever]

You're very welcome!

[@isidrolanda2101]

Super helpful video! Editing is great too (i.e., speeding up in certain parts). Thanks!

[@DoingWhatever]

thank you - glad to hear it was helpful!

[@benshurdhi3003]

Great video, very helpful. One question I have is about the space from concrete wall to the wall you are making is there a certain space you have to keep? I'm going through same project very soon. Thanks in advance.

[@DoingWhatever]

Thank you! I provided a 1/2” space between the concrete wall and the 2x4 wall. This should be plenty of air space should any moisture get back there - it will dry out. Basically just marked 4” off the concrete wall to give me the face of the 2x4 wall. 3 1/2” for a 2x4 leaves 1/2” of air space. Hope that helps!

[@user-dz4hr1qc3n]

Thank you for this video. Very easy to follow. I’m going to try this in my own. I have no idea what I’m doing but I’m a confident woman 😊

[@DoingWhatever]

You can do it!

[@jamestewell7721]

Not a bad video. My only recommendation is the joints on your top and bottom plate should be offset. Bottom plate is fine then you should of used a longer board to get the seams away from each other. And put the seam between studs and then sister that section of top/bottom plate. That’s the correct way to do it if you aren’t going to do a double top plate but the way you showed is how some builders do it to speed it up (not their house they don’t care). Another thing I learned is when marking for cuts, I do a check with a perpendicular line going up to the tape then slash at an angle to the waste side. Just eliminates pencil lifts

[@DoingWhatever]

thank you - these are very good tips I'll have to remember for next time! Really appreciate it!

[@soulsoothing6133]

wow. overall best video ever literally dummy proof , im now on my way to home depot

[@justinlandry2162]

Be sure to check the crown of each stud as they vary and need them to go all the same direction. Unless you want a wavy wall for a special effect.

[@DoingWhatever]

Yep, that’s a good point I forgot to mention. Thanks!

[@nmaze6913]

How do you check the crown of each stud? Is this also applicable for Canadians?

[@justinlandry2162]

@@nmaze6913 You turn it on its side and stare down the length of the stud. This will determine if one side has either a bow (crown) or cup in it.

[@Syrion84]

Great tutorial. All of the things you thought ahead on were extremely helpful.

[@DoingWhatever]

thanks! glad it was helpful!

[@derekbradshaw2195]

Built my first wall, thanks for the instruction. Outstanding

[@DoingWhatever]

Fantastic! not a problem!

[@pensionat60]

I wasn't looking for a framing video but something told me to check it out....which I did! Thanks for taking on an odd shape/length wall. It was just a great video. You carried it well with easy to follow instruction. Plus...... you didn't have hard rock music playing in the background or using it as filler. Perhaps, 'Ask this Old House' is looking for another carpenter......you have my vote.

[@DoingWhatever]

wow! thank you for such an awesome comment! Glad you found it useful and paced decently 😃 I would be honored to work with those guys! maybe someday... thanks for the vote! lol

[@gnjprice]

Great tutorial.

[@cheryldunaway9177]

Getting ready to frame new basement in our new home. Thanks for your video, much needed help.

[@DoingWhatever]

No problem, glad to help! Good luck with the basement!

[@ejazahmedabbasi7482]

Excellent video what I learned from you could have saved years of my life. Many thanks

[@DoingWhatever]

Great to hear! Thank you!

[@Maillady42]

So I’m wanting to build a couple of walls in my pole barn & I think this is the same concept. Regardless, you taught me a lot! Ty!

[@DoingWhatever]

Awesome, glad to hear that!

[@sfkeepay]

Exceptionally clear and direct instructions. Very helpful!

[@DoingWhatever]

Glad to hear it was helpful - thanks!

[@eddiemartinez9492]

excellent video! great explanations and narration.

[@DoingWhatever]

Thank you! Happy to help!

[@sgtsegatto]

Very thorough and useful video. I learned a lot in just a few minutes.

[@DoingWhatever]

Glad it was helpful!

[@fletch8951]

Just finished framing a room in a basement and have so many questions. 1. Where your wall butts against the existing wall, why not run blocking between the studs on the existing framing to tie the new section in? 2. where the two sections of the new wall meet, why not end each section with a stud and attach the two sections together? Wouldn't that be easier (and more stable) than trying to have a stud split across two top / bottom plates? 3. No double top plate? Wouldn't that allow you to stagger where the sections meet, making the wall more stable? 4. Why no jack studs and header in the doorway?

[@tizzank81]

Great job teaching and making everything fool proof lol. I’ve learned so much from this one video, I will be following and continue to learn as much as I can from you. Thanks 💪🏽

[@DoingWhatever]

I'm glad it was helpful! Thanks!

[@Txpapabear]

@Doingwhatever this video has helped answer a lot of my questions. I’ve been wanting to enclose my carport and I would like to save money if I can do it myself. I’ve never done anything like this before. Thank you

[@enthused7591]

Well I wasn't looking to frame the Florida basement that I don't have, but I sure enjoyed watching and learning about this lol

[@DoingWhatever]

Glad you enjoyed it! I appreciate you watching 😃 stay safe down there!

[@sydrider6023]

Very good video for sure, tks for all the clear explanations.

[@JohnsonDiccneck]

Well done, mate

[@DoingWhatever]

Thanks!

[@alejvalencia1553]

Great instructional video! I’d love you opinion: creating a play space in our 100+ year old house for our two kids. I am going to divide the basement in half to separate mechanical and laundry and lay subfloor panel in the play space, should the wall be built on top of this subfloor? For the wall on the two exterior walls, how many inches away from the foundation is appropriate for air flow? The exterior walls do get damp in the summer and we run a dehumidifier from May to November. Thanks.

[@DoingWhatever]

I’ve never installed a sub floor before so I can’t really speak to that, but I know Home Renovision on KZbin has done that and has a few videos on installing subfloors. I think he installs the wall on top of the subfloor, but double check his video. For the air gap, I leave 1/2” which I believe is pretty typical. Good luck with the project!

[@jackmiller3395]

Excellent work, and thanks for sharing. Just a question, why there was a gap between concrete wall and wall framing @13:03 ?

[@zipperhead101]

Thank you for sharing. I know it takes time and adds to the length of your jobs, so I wanted ya to know I appreciate it. Wish me luck.

[@DoingWhatever]

No problem, just trying to help others if I can 😃 good luck with your project!

[@Mcmadison-b9y]

How do i like this video 1000 times? ❤

[@gaetanolicari1947]

Fantastic video. Love the small detail. Where are the bloopers. Lol. Well done young man.

[@DoingWhatever]

Thank you, really appreciate it! Haha there are enough bloopers to make another separate video! 😁