How To Build A Video Wall

[@itsscottwebber]

Complete package used in this video bit.ly/3EIdL1i

[@smitadas800]

Seems like it is not that cost-effective as I was thinking. Better to buy a bigger oled tv

[@pedroluchesi5285]

the video wall gear works with tube tv's ? if i use i rca to hdmi converter

[@samueljohnson1483]

Hey Mr, please can you tell me where to get these items to buy?

[@12mrvega]

Is there a video where you show when the two top tvs are up side down, and turning on the device

[@fundr1974]

Hi, What TVs are you using?

[@michaelcollyear2077]

Hey can this be used on 1x2 two tvs as well?

[@itsscottwebber]

yes absolutely , but you would need to make a custom graphic / video size because it would not be the usual 16:9 aspect ratio. I have done 1 x 3's that work great.

[@laurieyoung100]

How do you flip the screens upside down and monitor models?

[@itsscottwebber]

Hi Laurie , the video wall controller takes care of this no problem.

[@MrSirjud01]

How did you invert the top two displays? Can you simultaneously have 4 different displays (one on each tv)

[@itsscottwebber]

The controller allows you to rotate image on any of the 4 displays. It's a very user friendly front panel interphase. The controller I used is Video Wall option only . You can get controllers that have a Matrix /Video Wall option that will allow you to have 4 separate inputs to go to each display or switch to a single image over the 4 displays.

[@darkwing3147]

Thank you for the great video. I just have one question, how do you connect speakers to the screens?

[@itsscottwebber]

The two most common options for audio # 1 The controller has an audio output 3.5 mm / 1/8" that you can run to a bluetooth speaker or home theatre system. # 2 your source would also have an audio out. Hope that helps .

[@thegarageatlucyspleasantvi3453]

What screens did you use?

[@itsscottwebber]

Hi I used Brightlink 49 " Commercial displays bit.ly/3Yrn5Nw

[@robroy3185]

What tv did you use

[@itsscottwebber]

Hi Rob , I used 49" Brightlink Displaysbrightlinkav.com/brightlink-s-new-49-1080p-4k-w-multi-screen-video-wall-display-ultra-thin-3-5mm-bezel-super-bright-450cd-m.html

[@tiantianchen3724]

Nice!

[@bantertv9332]

Hi, could you dismantle the screens and remove the bezel and mount them closer for more seemless joint? Do you have any thoughts?

[@JoelSapp]

That’s one of my thoughts on this too. I get why manufacturers make wall panels for companies but they could do the same for homes but they price way too high for mid-high end home use.

[@justicefreeman6930]

I’ve never done one. Would it make sentence to assemble with TV’s face down on the floor. Then unhook the frame from the TV and mount it to the wall. Lastly pick up each TV and hang it. Did you say the top TV’s may need to flip over?

[@aray2100]

Where did you get the "hook brackets" from the TV to the 80/20?

[@simonriggs]

Nice one

[@toddhare8225]

scott.. How do you do this if you use a streaming service instead of hardwire?

[@itsscottwebber]

Hi Todd , this is a very late reply but just treat the video wall like a single TV to display . There is no difference .

[@juanl4496]

Hi Scott, you mentioned the top two screen were upside down to create a smaller crosshair, how did you flip the image of the top two screens?

[@itsscottwebber]

The video wall controller has the ability to easily rotate the image of each individual TV .

[@TheSaltyfamily]

Great DIY video Scott! What are the brackets called that mount to the TV and the T-bars? Where can you purchase them?

[@itsscottwebber]

Thanks for your interest . The brackets that mount to the TV's are called TV Hooks . I am not sure if you can purchase TV Hooks seperate.The hooks I used were from Brightlink and were supplied to me for this video. If I can find the hooks sold separate I will let you know. You can purchase complete kit here: brightlinkav.com/aluminum-mounting-brakcet-for-video-wall-displays.html

[@TheSaltyfamily]

​@@itsscottwebber Thank you for your response. Are those brackets exclusive to brightlinks complete mounting kit? I have talked to hardware stores and local AV installers and they have never seen them before. I also looked on Amazon and haven't found them. I've already purchased the t-bars and other brackets based on your video and would be interested in purchasing those brackets separately.

[@itsscottwebber]

send me your address to [e-mail]

[@patrickcouture5383]

Great video, thank you. With this set up, is it possible to watch something separate on individual TVs and at the press of a button use it as a video wall from one source?

[@itsscottwebber]

Yes , absolutely I use this unit right now , It has matrix capabilities , 4 inputs to 4 TV's and the ability to quickly change to a Video Wall.brightlinkav.com/brightlinks-4x4-4k-hdmi-matrix-with-built-in-4k-video-wall-controller-and-multi-viewer.html

[@rogerl8488]

@@itsscottwebber hi so I want to put 4 55 in tv on my wall just to watch TV so that being said can I watch 4 different TV shows or games or if I decide to watch one game cast over all 4 tvs is this what I need to buy the link you provided? Thanks you.

[@uptoproofingdisastersoluti7218]

I want to build for my box trucks 🚚 for a digital billboard business. I think ill need more than four tv hook ups for side... any ideas?

[@itsscottwebber]

You could do 2 x 2 ( 4 TVs ) per side or 3 x 3 ( 9 TVs aside . A LED setup might be best for your setup . Much more durable than LCD . brightlinkav.com/video-walls/led-video-wall.html

[@hawaiisurfingacademy]

Scott , is it it possible to make a video wall for the outside of my stepvan? weatherproof of course? appreciate your thoughts!

[@modishnailspaminthill6097]

Will it work with any TV?

[@itsscottwebber]

Yes any (TV)display with an HDMI input will work , the source input quality is the most important part of a video wall . The better the input image ( 4K) the better the results of your video wall.

[@jonathanmeier5929]

Looking at putting a 2x2 video wall in my bar. I can watch it as a big display or watch 4 separate games at one. Couple questions. 1. Do you need a computer for the set up or just the matrix switch? 2. What is the best way to run the TVs individually, one remote would essentially change them all which seems frustrating. 3. Could a fire stick work as an input source for the video wall?

[@itsscottwebber]

Hi Jonathan , yes make sure you get a video wall / matrix controller . If it is just a video wall controller you can only have it set for one image. The controller has to have the option to run in matrix mode . With the matrix option it would give you 4 seperate inputs or more depending if you are going to have a 2 x2 configuration( 4 TVs) or 3 x 3 ect. A fire stick or Apple TV work great. and most controllers are just plug and play. You don't need a computer to run the video wall. You can run cable boxes into each input . Some cable providers have a compressed signal and may be a not perfect image if you use large displays 65" or bigger and switch to video wall mode. The image is a little pixelated up close but fine if you are a little farther away.

[@kmcg101]

thanks for the video. I'm slowly learning. If I used 2 16x9 screens in portrait to display a 16x9 video, would it smush the video to accommodate the mismatched aspect ratio or is there a way to display without distorting? My goal is 2 TVs hung on a wall in portrait to simulate a view through 2 windows.

[@fegoodson8752]

How to you create the tv wall where each tv can play different without having multiple cable service

[@itsscottwebber]

Unfortunately the TV Walls will only play whatever HDMI source you plug into them . Apple TV , Cable Box , Etc.

[@jamiehansen3140]

What TV's are you using, I haven't seen anything with a clean bezel

[@itsscottwebber]

Hi Jamie , I am using Brightlink 49" displays .. They are pricy but have a super thin bezel . In one of our offices we are using 49" LG tvs from Costco . Its a thicker bezel but it still looks really good. brightlinkav.com/brightlink-s-new-49-1080p-4k-w-multi-screen-video-wall-display-ultra-thin-3-5mm-bezel-super-bright-450cd-m.html

[@jamiehansen3140]

@@itsscottwebber /thank you sir.

[@Btstaz]

The documentations seems to say the output from the splitter is only 30hz is that correct? I also don't understand why it is splitting to 4K@30hz, is it up sampling? and if so why not let the TV do that they already have dedicated hardware to up sample which is probably better then this device can do. It does say it supports downscaling but does not specify the hz if downscales to. The last thing I want is to provide 60hz input and get my video wall running at 30hz. Can you clarify if the documentation is wrong?

[@soreloser6018]

Nice. And now you just need to update your key light. Nice video.

[@itsscottwebber]

Yes you are right , so hard to get that key light right without showing in the back ground.. I have experimented and have it much better in new videos

[@DrAlexanderHamilton]

@@itsscottwebber WHAT IS key light?

[@digitalnitingarg]

Please share integration videos, Digital signage application, these are quite confusing.

[@joshuashaw8244]

Scott is there anything special I need to do when turning the TVs upside down?

[@itsscottwebber]

Hi Joshua, the TV,s pretty much mount the same way upside down ,so thats straight forward. Rotating the image is done in the interface of the controller. It depends on the video wall controller you will be using , it must have the ability to rotate images ( most on the market should have that ability now) very easy to do on the Brightlink controller used in the video.You go into settings , choose the TV ( 1-4) that you want to rotate, choose rotate and thats it. Hope this helps !

[@joshuashaw8244]

@@itsscottwebber Thank you!

[@welovelibraries4556]

How do I get a different cable channel on each monitor?

[@itsscottwebber]

This controller will allow you to have 4 different sources ( 4 inputs)that can be sent to each monitor or have 1 large image over the 4 monitors. Unfortunately you would need a cable box for each Chanel. brightlinkav.com/brightlinks-4x4-4k-hdmi-matrix-with-built-in-4k-video-wall-controller-and-multi-viewer.html

[@welovelibraries4556]

@@itsscottwebber Do you have any experience with using any of the controllers that use an app on the iPad to control what’s on the monitors like hiperwall

[@obelix_gaul]

Would it still work if you use projectors instead of TVs?

[@tangandy1980]

Hi dear we have multi projector edge blending if you interest please email me

[@gregorynp]

I would like to have a video wall with option to either see one image across the 4 screens or four different Cable channels. Is that possible with your hardware?

[@itsscottwebber]

Yes Gregory , what you need is a Video Wall Controller that has a Matrix option . This will allow you to have 4 HDMI inputs for 4 different sources . Then you can have each TV displaying a separate image or choose video wall mode and have 1 large image . I can give you more information if you would like, you can email me at [e-mail]

[@micmaclenn397]

Hi Scott, I am adding a video wall to my home office and I really like your design! Where can I get the specific rack and rails that you were using?

[@itsscottwebber]

Hi Mic , you can use 1 1/2" square extruded aluminum (80/20) bars or buy the kit from Brightlink AV brightlinkav.com/catalogsearch/result/?q=wall+mounts

[@micmaclenn397]

@@itsscottwebber Thank you!

[@MacChainCoLtd]

@@micmaclenn397 let me know if I can help in anyway

[@sevvalbayraktar2038]

how to use and connect to videowall controller?

[@shankarvishwanath9001]

Hi Scott, If I have only one image that I want to send to a video wall built with just TV's (that are not daisy chained), is there a controller that takes one input, splits the image and outputs 4 cdmi's outputs? your help is appreciated, thanks

[@itsscottwebber]

Hi Shankar , Yes that is exactly what the controllers do . One source (laptop, Apple TV , Roku ect.) into controller , then 4 HDMI outputs to each TV or display. Hope this helps .

[@shankarvishwanath9001]

@@itsscottwebber want the opposite Scott, one in, 4 out, but only one image, split into 4 proportional parts to make one large image

[@EpicRSFail]

@@shankarvishwanath9001 Did you found any solution?

[@robertthompson8861]

This is a great idea! While I can find sources for the 1.5" extruded aluminum, I can't seem to find any of the brackets used. Could you provide me with a bit more detail as to where you found those for both the main extruded aluminum frame but also the bent aluminum bracket used to mount the TV's the extruded aluminum. Thanks!!!

[@itsscottwebber]

Hi Robert, you can talk to Tyson at Brightlink AV [e-mail]

[@itsscottwebber]

It also depends on the bolt patterns for your TV's these brackets can be drilled to work in your application. You can email me at [e-mail] and I can show you more info.

[@Iss-baar-400-paar]

Hi Scott, can this be done with 2 video projectors and the 2 screen placed at right angles, and create an immersive experience ?

[@tangandy1980]

Hi dear our product support video wall and multi projector function

[@24kprincep]

Hey Scott, would it be a good idea to make a video wall with 2 tvs only with your product? I wanna do it to play video games and maybe watch some sports so…is there anything i need to know?

[@itsscottwebber]

Yes you can create a video wall with 2 TV's but what you have to keep in mind is aspect ratio.What you would like to achieve is 16.9 or 4K 21.9 aspect ratio. This would not be achievable with only 2 TV's unfortunatly .It will strech the image out a little too much and look a little differnt than what you're use to.If you can go to 4 TV,s you would have a much better result.

[@24kprincep]

@@itsscottwebber cant we balance it with the Size like bigger tv’s maybe?…I’m trynna figure it out in the most affordable way possible u knoo

[@bestamerica]

' nice big TV... not like 2 black lines as.. + ..on the wall

[@SheaHarris]

Why not just one big TV?

[@poisonoverdose1]

Hi Scott, thanks for taking the time to make the great video! I see you're still answering questions after a year, so I though I'd give it a try. I'm a total novice at this video wall thing, but have spent a TON of time and money doing what you have. My intent is for stage use, as I'm a musician. I'm trying to use my laptop, to play video content, through a 3X3 matrix switcher ($700 Chinese no-name), onto 9 LCD (4K) TVs. Sometimes...some of the TV's show content, but sadly, most of the time, none work at all. I get a lot of "no signal" messages. I'm using all brand new equipment, (switcher, laptop, TVs), including HDMI cables of varying lengths of 6'-15'. At this point, I'm MISERABLE and ready to give up and ditch the whole idea. If you were me...what would you think the problem is? Thanks so much!

[@itsscottwebber]

Hey , sorry to hear , you are having issues. Don't throw in the towel yet ! The main issue people have with the " no signal" problem is HDMI cables . HDMI cables have ghosts in them . Some controllers and TV's have troubles making that hand shake connection. and for whatever reason some HDMI cables will just not work in that particular combination of controller and TV. I have had that issue with brand name cables and switched them out to Amazon's HDMI cables ( they seem to be good quality) and problem goes away . I would start there. Use same brand and length for all TV's . Hope this helps!

[@michaelwilliams9508]

Hi I'm interested in making one for the same purpose...any advice would be appreciated...

[@malachipadilla6017]

Hello I know that your video was only how to set up a 2X2 setup for a TV wall is there a way to do a 3X3 setup or even a 4X4 setup similarly to the way you did your wall or is there a lot of more added steps?

[@itsscottwebber]

Hi Malachi, I am working on a new video for a 3 x 3 -65" . Here is a link for a time-lapse 3 x 3 build . kzbin.info/www/bejne/oKPCaYKFqN6cqtU

[@mdfrimpong22]

Please how can I get the device

[@michaelwilliams9508]

Thank you... Great video

[@astralleviathan366]

Is there an rca Version of the video wall box

[@monoxydeish]

this is not a real vido wall....this is only a tv in serial connection.....

[@4FastSigns]

What a dumb and expensive way. Dah