How to build a wavy wooden flag. Detailed video.

[@larrybenton4915]

Always enjoy your videos Dave. Really appreciate the detail you put into making them. Your unique style of narration makes the viewer feel like they're right there in your shop with you. Keep up the good work............ Thanks, Larry

[@davidvasher6752]

Thank you so much larry. Keep on watchin. 👍🇺🇸🇺🇸

[@joeaguilar-teacherofthewor4166]

This is the best video on making a wavy flag. Can't wait to make my own. Keep teaching us. Thanks.

[@davidvasher6752]

Thanks joe, thanks for watching too. These are fun to build and look great when finished.

[@lennielaxton8559]

Love the details that you add , leave them in ! That's how we want to see it !

[@davidvasher6752]

Thank you my friend. Thanks for watching🇺🇸👍🤠

[@davidwilson-fu4je]

This is an awesome project and thank you for being so detailed.

[@davidvasher6752]

Thank you David. Be careful if you build it and enjoy the build👍🇺🇸🇺🇸🇺🇸

[@DaveRichardson-v6f]

hi my name is david and im from ENGLAND i watched your video on the american flag and i loved it i know i will never be able to get one and you didnt have to keep saying sorry for how long your video was going to be it was a honor to watch a true craftsman at work good luck to you my american friend god bless america

[@davidvasher6752]

Hey dave. I luv comments like yours, especially from other countries, please keep on watchin and subscribe, i have a request to do a challenge coin holder flag, that will be next video. 👍🇺🇸

[@DaveRichardson-v6f]

@@davidvasher6752 thank you sir ive just subscribed

[@dougwynn6254]

Thanks Dave ..enjoy your video’s

[@juancbarahona7544]

I am immigrant , came 20 years ago , I am learning to be an American now, I love your American flag, I will make one myself following your video and will subscribe to your channel . There is so much to learn watching your videos, thanks sir.

[@davidvasher6752]

The reason i do videos is because i luv to teach what i know. You comment is much appreciated, keep on watchin theres more to come. 👍🥰🇺🇸

[@juancbarahona7544]

Surely there is loads of knowledge coming from you I will deeply treasure.

[@davidvasher6752]

@@juancbarahona7544 thank you sir

[@jimtalbot5113]

Your videos are awesome. Shows every step of the way. Don't worry about negative comments your instructions are perfect. Keep up the great work.

[@davidvasher6752]

Thanks so much for your comments. Trust me know worries over comments. Keep on watchin jim, more to come, 👍🇺🇸,Happy new year

[@CarlOrminski]

Awsome, I made 2 so far myself, but om gluing and screwing the boards together, using 2 1/2 " trim screws. 😀

[@davidvasher6752]

@@CarlOrminski hey user, glad your enjoying my videos. 21/2 trim screws👍👍.keep on buildind and keep on watching my videos. Thanks. 👍👍🇺🇸🇺🇸

[@BrianUnderhill-dx6fy]

Fantastic job and thank you for sharing!

[@davidvasher6752]

Thank you for watching Brain. I have a hand made barbar pole video coming out soon. Watch that too!! 👍🇺🇸🇺🇸🇺🇸

[@Tbonz19]

Very nice. Thanks for sharing the way you make these wavy flags. I like the way you go about showing all the details and the use of a french cleat to hang the flag.

[@davidvasher6752]

Thanks so much, I know my videos r long but its the only way to explain how to do it. Merry Christmas, and thanks. 👍🇺🇸🇺🇸🇺🇸

[@donmthg]

Another great video David! Thank you. I will be making some of these.

[@davidvasher6752]

Thanks, its a long one, nut detailed. Be safe and enjoy the build👍🇺🇸

[@fartinbrundle5495]

Brilliant video thank you

[@davidvasher6752]

@@fartinbrundle5495 thanks for watching

[@paulpeterson3624]

Thank you for the great video David, that looks like a project I will put on the list to do! Great instruction!

[@davidvasher6752]

Thank you Paul. Glad you liked it. More to come. 👍🇺🇸

[@edbratt4955]

love your work ... BUT... no push stick and your hand so close to the blade and a long sleeve flannel shirt to boot...you're a brave man

[@davidvasher6752]

Hey ed, how you doin, IKnow, trying to be bit more safe for viewers. Been brought up in the shop with popps, been doing this as far back as i can remember, Ive been being more safety conscious in my videos. Thanks for watchin Ed. 👍🇺🇸🥰

[@raelynnhamilton5750]

The long video is ok I just came across your Chanel I love it awesome project

[@davidvasher6752]

Thank you so much. Another long one coming up soon, building a workbench desk.

[@jmadadak]

Just found your channel and I really enjoyed the video. If anyone don't like the length of your vids they can fast forward.

[@davidvasher6752]

Thanks my friend, thats the way i see. Most rush through videos, then im like well how did he do that. Keep on watching, more to come.

[@jmadadak]

@@davidvasher6752 The way I see it is that your doing them perfectly and I love your personality.

[@krowwwmusic7005]

Great tutorial man. Love the shop! I’m building one for a marine vet and thinking about how I can add a marine seal in it!

[@davidvasher6752]

Thanks for watching I would like to try a seal myself

[@davidvasher6752]

Thanks for watching. Would like to do a seal myself, probably carve with dremel.

[@WilliamCreasap]

Hi David, Great video, awesome looking flag. Do you actually fill the stars with the varnish? Sounded like you said you fill them, so they are flush in the end product. Do you have any with added emblems, or decals, like military logos, eagles, or deer?

[@davidvasher6752]

@@WilliamCreasap hi william, thanks for watching. I dont fill the stars just put varnish a little heavier. I do carve in miltary lettering such as USMC. Or ARMY. On stripes near bottom of flag. 👍🇺🇸🤠

[@killersqish9183]

Great video, M thank you and Merry Christmas!

[@davidvasher6752]

Thanks for watching killer. Merry christmas

[@jay8960]

Very beautiful work!

[@davidvasher6752]

Thanks j. Thanks for watchin

[@DaveEbert]

very good learning video thanks

[@davidvasher6752]

Glad you enjoyed it dave. Start building my friend

[@jassenfeffer]

Love your flags bc they’re similar to mine-everything from the lay out to the wheel of death (as my buddies call it) 😂 to the finish…except mine have cuts on the FACE .. love the helicopter sounds just as much, bet you’re a fun grandpa! I use a 2 part epoxy finish but I have to babysit it bc nobody likes runs or drips in those valleys. Nice video, love learning from other craftsmen ; have a great day bud…🖤

[@davidvasher6752]

Luv the wheel of death🤣its true!! Luv makin these things, i've made alot of stuff but the red white and blue is addicting. Thanks for watchin. Check out my red white and blue peace pole. Video will be out in a week or so.

[@kennyhornby9704]

Great work, can you torch the stars a little to match the stripes. Just wondering. Thank you for posting this.

[@davidvasher6752]

You sure can, but myself I've done this but center of stars seem to burn more than I like. Thanks for watchin Ken. 👍🇺🇸

[@kennyhornby9704]

@davidvasher6752 thanks for replying, keep up the great work. !!!!!

[@Zbonet]

Beautiful project! Just a question - could you list the exact union template you used? I am afraid there may be different size templates and I obviously want mine to be the right size for the wood cuts Thanks Richard

[@davidvasher6752]

Hey richard, thanks for watching. Template size 101/2" by 14 3/4".have fun building and be safe.

[@markheld995]

Great video seems like you could make a bigger base for your router.

[@davidvasher6752]

For sure

[@carriemyre5809]

Absolutely love this!!!

[@davidvasher6752]

Thank you Carrie, luv the nice comments. More projects to come.

[@WilliamCreasap]

Thought of another question Dave, have you ever taken the router and fluted the back to reduce some of the weight? Is it possible to do without the risk of warping, or hitting screws that hold the pieces together?

[@davidvasher6752]

I make mine so wavy, if you hit a screw, there goes your bit. Ive even hit screws when i do my french cleat.

[@mornglow]

Love this wavy flag. Do you make them a little smaller? And also, you don't mention prices on the description Love your work.

[@davidvasher6752]

Thank you so much. I have not sold any off utube. Keeping it local as of now. But i sell wavys $300.plus 50 for shipping. Thankyou so much for watching 👍🇺🇸

[@TimothyCabe]

Great Job!!! I love It! what size Union stencil did you use?

[@davidvasher6752]

Hey Tim. In the shop right now doing another one, the union is 15 by 10 1/2. Thanks for watchin . That was a long video. 👍🇺🇸

[@thomaswashburn3396]

David, what do you charge for your Wavy Flag like the one in your Dec 2022 video?

[@davidvasher6752]

@@thomaswashburn3396 hi tom i sell them for $300.00.thank you for watching my videos

[@johnmanfredo422]

awesome.

[@davidvasher6752]

Ahhh, your still watching. Thanks john. Just curious, what wood you like to see built. 👍🇺🇸.patroit wise?

[@TimothyCabe]

hey David , in the the valleys and craving what is the deepest you go down? Thanks

[@davidvasher6752]

Hey tim, ill leave about an1"on the edges in places. Just make sure you dont go to deep around the french cleat area. You dont want to break through there. Thanks for watchin. 👍🇺🇸

[@papascruffy]

Awesome, how many hours do you have in this?

[@davidvasher6752]

10 to 12 hrs papa. The more you do the faster it gets. Thanks for watchin, 👍🇺🇸

[@ermannodangelo1062]

Great job on the flag, looks amazing. Did you make the Punisher Skull in the background?

[@davidvasher6752]

Thank you so much. I did make the punisher also

[@ermannodangelo1062]

@@davidvasher6752 Did you make a video on it, or do you have plans for it.

[@davidvasher6752]

I did not do a video on punisher skull. But if you want i will make one. I will put a detailed video out this weekend.

[@ermannodangelo4087]

That would be awesome, looking forward to it.

[@dougwynn6254]

Dave..could you use. 2x2’s…???

[@davidvasher6752]

@@dougwynn6254 hi doug. I wood not use 2*2.with the waves and screwing and under cut for french cleat i think its just to thin.

[@mattbiereichel357]

So how much do you charge for this flag?

[@davidvasher6752]

Hi mat. $300.00 i sell them local here in Michigan, just sold one at a show memorial day.

[@JoseHernandez-mj6ne]

How are you sir. My question is, do you screw two pieces of wood at a time?

[@franklangel1521]

Just for safety you should use a push stick instead of your hand

[@davidvasher6752]

Thanks for your concern. And i have. Thank you for watching

[@electricvehicle465]

That flag has to weigh a ton.wow thicker than a snicker .

[@davidvasher6752]

@@electricvehicle465 hah. Not so bad, lol. Never weighed one.thanks for watching.👍🇺🇸🇺🇸🪚🔨

[@petejohnson9039]

How much does it weigh?

[@davidvasher6752]

Never weighed it pete , ill say 25lbs.

[@JoseHernandez-mj6ne]

How much for the flag?

[@davidvasher6752]

Wavy flags are $300.those too i just sell locally

[@TimothyCabe]

Your Rockin' in the free World

[@davidvasher6752]

Thanks Tim, 🕺👍🇺🇸

[@JoseHernandez-mj6ne]

Never mind lol should had waited