How to build that great American wooden flag.

[@KennethLapan]

Nice step by step video built mine right after I watched your detailed directions.You are a great teacher!!Thanks

[@davidvasher6752]

@@KennethLapan thank you so much. Plenty more videos to come. 🪚🇺🇸🔨

[@howardharris258]

I really enjoyed the video. I am semi retired and doing crafts with broken hockey sticks. First project is the American flag, so this video really helped. Stay tuned for the results!!!

[@davidvasher6752]

Thats awesome howard. Gotta see some pics. Enjoy the build

[@robertnolan6867]

Hello David, well I didn't get totally finished but close. Made a few mistakes but its fine. I mentioned that I had some extra 18x24 cedar blocks about 2 inches thick. Not the easiest to work with but for the first one it's ok. Didn't have my air gun so had to use wood screws, predrilled the holes for the back straps and pushed a little to much on a few that went through. Just sanded them down and will touch up. Tomorrow I will start the stars using the dremel. Bought the extended wand but I think I will use just the attachments I have. As I mentioned I didn't burn ghe wood but used a solid paint, water based. The cedar makes it pretty heavy so I have to see how bride wants to hand it or just lean it against the wall or fireplace. After 50 years I finally understand it's up to her!😊

[@davidvasher6752]

Thats funny your right. 43 yrs for me. The mistake just add character. Hope you enjoyed the project. 👍👍🇺🇸🇺🇸

[@FoxFamily4Life]

Ahhhmazing!!!! Ive watched this many times!!! You are so thorough and your flags are stunning!! Ive been wanting to surprise my husband with one of these. His love of the military runs deep and after recently meeting his only blood family, other than our four sons and myself he learned his grandfather served in Vietnam. I now want to make a few to my first family reunion ever. Now its my turn to meet my blood relatives. Apparently they served in all branches. I was told they go back as far as the early 1800s. I am so excited! I can't wait to jump on this project. Thank you for being so thorough and thank you for showing us these amazing flags

[@davidvasher6752]

If you have any questions just ask. You are why i do this. 👍🇺🇸🇺🇸🇺🇸♥️

[@ronmounts8075]

Outstanding and VERY HIGHLY STEP BY STEP!!!! IM A RETIRED NAVY CHEIF AND I HAVE BEEN WANTING TO MAKE ME ONE OF THESE MYSELF FOR MY MILITARY ACCOMPLISHMENT AWARDS!!!!! WILL START ON THIS PROJECT TOMMORROW!!! THANK YOU HIGHLY SIR FOR BEING A TRUE AMERICAN!!!!

[@davidvasher6752]

Thank you for your service sir. I also have a challenge coin flag video and will be putting out a concealment flag case soon.please subscribe ron.Enjoy building your flag.👍🇺🇸🇺🇸🇺🇸

[@philshock3805]

Good job! That's pretty much been my method for the few I've made ... down to the razor blade masking. One difference is I like to hit the stars lightly with the torch after carving to make them match the stripes a bit. (Have to be careful though - the heat can bubble the stain if you hang too long. lol) Thanks for sharing.

[@davidvasher6752]

Thanks for watchin. And i have also torched the stars. Luv the feedback. Thanks Phil

[@robertnolan6867]

Hello again David. Just about finished my first one and had a couple hick-ups butcher better now. Like I mentioned I tried using cedar but the edges didn't come out very smooth and after I stapled the supports in the back I didn't like it so I took it apart and started over, I found the backside of the stripes were much smoother and more square. Much better. I see that you and others use plastic templates, I ordered metal ones, 3 sizes from Amazon, and I have been practicing using the dremel and # 106 to cut out the stars. Hopefully tomorrow I will cut the stars. One thing I wanted to say was when I used the razor blades I had a tough time holding them and hammering them in due to arthritis in my fingers. I put the metal template down, taped it in place and ran the 106 along the side, just barely, and was able to secure the blades. It's really a great idea to keep the stain or paint t from overlapping. I would love to see any videos on you making crosses. Thanks again, Robert

[@davidvasher6752]

Hi robert. How to make an american flag wooden. David vasher. Thats the video i have, also i would suggest trying #2pine for your next project. If you subscribe you will see i have several videos.have a great night.

[@kenbradshaw7585]

Forget the blades, I use green frog tape and have no bleed problems!

[@sandyfriesz63]

Oh for awesome. I can’t wait to make one for my Marine son. Thank you for sharing and teaching each step.

[@davidvasher6752]

Thats awsome. If you good with the Dremel you can get 1"stencil letters, and on the 2nd from bottom red on right side carve. U. S. M. C. Ive done this and it looks great. 👍🇺🇸

[@Mark-yb1sp]

Excellent job, David. Appreciate your videos.

[@davidvasher6752]

Thank mark. Thanks for watchin. Hope ]you build something cool. 🪚🔨👍🇺🇸

[@irishchopper9065]

Wonderful learning experience for me watching this video. Thanks so much!

[@davidvasher6752]

Thank you chopper, sure hope you build one, and thanks for watching. 👍🇺🇸🇺🇸

[@jimsgardensandrabbitry]

Beautiful work. I really enjoyed watching and listening to this. Many blessings.

[@davidvasher6752]

Thank you so much. More to come Jim

[@jimsgardensandrabbitry]

@@davidvasher6752 have subscribed, so will be watching. Thanks.

[@davidvasher6752]

@@jimsgardensandrabbitry thanks

[@lindaburt6518]

Thank you. I love your process and you explained it well, to boot. Keep up the good work.

[@redwood45CA]

Great video, beautiful work, now I’m off to work on my first flag, thank you, Sir!

[@davidvasher6752]

Thats awesome , have fun. Thanks for watching.

[@jeffbenson8698]

I just made a flag last night and ur video popped up this morning. Lol. I guess "they" ARE listening. I used 2x10 cut in 1in strips. Little different burn pattern on side grain. Used metal union template and dremel like a router with it's base and 106 bit. Took me over 2hrs to do stars ☹ but got faster by the 50th. Love ur video and will be checking out ur other projects. Thanks for sharing.

[@davidvasher6752]

I luv the fact your not sitten on the couch. Keep up the wood workin. And thanks for watchin. Try a wavy flag, just be careful. 👍🇺🇸

[@davidvasher6752]

By the way if you just subscribed your my 1400th,Thank you❤

[@jeffbenson8698]

@@davidvasher6752 I did👍

[@Cowboy_Steve]

Wow! I really enjoyed watching your video. I think I can maybe even make one myself lol. Just started simple woodworking projects. This looks like it will be fun to make. Thank you for sharing 🤠

[@davidvasher6752]

Hey there cowboy, luv replies like yours. They are fun to make. Enjoy the build and stay safe

[@RobMacNeil-w6y]

Good morning Dave what an amazing build and attention to detail how much do you charge for the flag when it’s done?

[@davidvasher6752]

@@RobMacNeil-w6y thanks so much. I was selling them for 100.i just now getting into a very cool consignment store. Sold my 1st flag there for 125.in 1 day. 🇺🇸👍🪚🔨

[@veea.4936]

Thanks for sharing! I am thinking of trying to make one. Prolly in a week or so. I just bought a bunch of stuff to work with. How much do you sell these for? If I can make them I may try selling them locally. Thanks in advance.😊

[@davidvasher6752]

@@veea.4936 i only sell mine locally to. I get $100.that is cheaper than most. Good luck and have fun

[@BMarkW]

Aloha my friend, wonderful video, thanks for all the great info. Questions for you if i may : Why not do a coat of Polly to protect the wood in the middle from the weather if put outdoors? Would fence pickets be a good option for wood?

[@davidvasher6752]

Aloha. If you mean precoating before assembly,all sides, i guess its because i carve stars after its put together, that way the stars and all are coated. I do not use fence pickets because i don't think the burn would look good. If you not going to burn then try it out. I have used skid wood to to my big stats and it looks great. Check my video out on that. Enjoy, thanks for watchin. 👍🇺🇸

[@joannhh]

I really enjoyed watching you make these flags Thank you for taking the time to explain the process! I’m a newbie and still learning! ❤

[@davidvasher6752]

Thank you so much, luv to teach, be safe enjoy the build.

[@tonyamitchem2503]

Hi David, my hubby and I certainly enjoy your videos, but I have one question...on the sanding between applications of the varnish at the end...you do this by hand sanding and this is over the entire piece...we would really like to see a video of you sanding it in between...dont wanta mess anything up. Thanks

[@davidvasher6752]

Hi there Tonya, I sand between each coat very light with 220 by hand. Then i vacuum with the vacuum brush. Then light coats with varnish. No need to go to heavy with varnish. I will be doing a challenge coin flag in a few weeks, I will show more on sanding for you.

[@tonyamitchem2503]

@@davidvasher6752 Thank you so much for the reply. Also, we will be looking forward to watching your next project. Thanks again, Tonya from the sunny seashores of NC

[@davidvasher6752]

Tonya doing a coin flag video this week. Detail the sanding for you

[@tonyamitchem2503]

@@davidvasher6752 Wonderful, ty for letting me know. Another question, where can we find your flags for sale, we actually looked for you on Etsy, etc but can't find you?

[@davidvasher6752]

@@tonyamitchem2503 i really dont sell them on etsy or on line. Just keepin it local as a hobby. I do get$100.for flat and $300 for wavy.

[@kenmeyer582]

David Thanks for showing us how Build the flag! Great explanation! I plan on doing this project sometime during 2023. Have a great New Year!

[@davidvasher6752]

Thats awsome. Be safe, thanks for watchin

[@steveesposito8753]

I would mess up the stars using a Dremel. I made a flag with wooden stars that i glued on. I also made the Union 1 piece. I've made a 2 foot by 14 inches and a 3 foot by 18 inches. Lots of fun. I tried to practice with the Dremel and no can do. LOL

[@davidvasher6752]

@@steveesposito8753 i started making one pc unions too. It dont matter how you do stars as long as you enjoy what you do. 👍🇺🇸🇺🇸🇺🇸🔨🪚

[@robertnolan6867]

Thank you for an excellent video. Making my first this weekend 😊

[@davidvasher6752]

Robert. Thank you so much for watching. It is a great project. Made one 5 years ago and havent stoped. Tray a wavy one next. But 1st watch my video. Lol.

[@Freedog423]

I’ve been watching few video is on how build these this is prob going be my go to vid great job

[@davidvasher6752]

Thanks so much. Any questions just ask. Let me ask you, what would you think of 1hr long video detail the make of a wavy flag. To long?. Thanks for watchin

[@Freedog423]

@@davidvasher6752 I personally would watch it but prob take me 2 30min viewings

[@robertnolan6867]

Hello David, glad to still be able to see your work. I've been making some crosses using 1x10 as suggested. I don't burn but my bride prefers colors being paint vs stain. When I varnis, especially the union, it has a yellow tint. Do you think I should just let the outside paint, enamel, stand alone? The crosses will be inside so is vanishing too much? Thanks again for the lessons, Robert

[@davidvasher6752]

Yes. I would not varnish over the paint. G)ad your building, thats awesome. Whats next robert.

[@robertnolan6867]

Home plate for my son. Big Braves fan ! Thanks for the info on varnish.

[@laurence72delucchi46]

Very nice. Something to hand down to my sons.

[@davidvasher6752]

That would be awsome laurence, enjoy the build, and thanks for watchin👍🇺🇸

[@donmthg]

That was very enjoyable and educational! Thanks so much.

[@davidvasher6752]

Thanks flybop

[@paulgreen177]

GREAT JOB!!! THANK YOU FOR SHARING!

[@davidvasher6752]

Hope you build one Paul. Thanks for watchin. 👍🇺🇸

[@pteddie6965]

Nice flag. Thanks for the video.

[@davidvasher6752]

Thanks for watchin my friend👍🇺🇸

[@williamdias4473]

Hey, Dave, what kind of wood is that? Is it Cedar or it looks more like Doug Fur, can you let me know? Thanks.

[@davidvasher6752]

@@williamdias4473 hello william, it is just pine that i get from lowes , just 1 by 10 or 12.thanks for watching sir. 🇺🇸🔨🪚

[@mikeseitz2792]

Dave how much do you sell them for if you don't mind me asking. Thank You

[@davidvasher6752]

@@mikeseitz2792 hey mike, hope your doing well. I sell these cheaper than most people $100.00. I do this as a hobbie and like to keep them moving. I only do 2 craft shows a year. My wavy flags are $300.check out that video too!!!. Have a great day. 🇺🇸🇺🇸🇺🇸🔨🪚

[@kdiamond3623]

Very nice. Out of curiosity why varnish over other available finishes?

[@davidvasher6752]

Hi my friend. Just what i like. 👍🇺🇸

[@kdiamond3623]

@@davidvasher6752 Gotcha!

[@lisaweberm.ed.4969]

Enjoyed your craftsmanship. Where do you sell these?

[@davidvasher6752]

I just sell them locally in Detroit4. area

[@davidvasher6752]

Locally, south of Detroit.

[@JoseHernandez-mj6ne]

Hello there. Is that a Brillo pad you use to wipe the color stain?

[@davidvasher6752]

No , its just a rag.

[@JLindbert]

Great video, and thanks. Always wanted to make a flag and will follow your lead.

[@davidvasher6752]

Thanks so much for watchin. Enjoy the build

[@qmoonwalker3847]

Great video! Thanks so much!!

[@davidvasher6752]

Well thank you moonwalker. More to come. 👍🇺🇸

[@erictreptow1549]

Great video David. Thank you so much!! Gonna try my hand at this. I have two questions. Have you ever considered making the Union out of one piece of 1x12? Any issues you can see with doing that? Also are you using any type of tip on the torch? Seems like your pattern is more open my propane torch I use for sweating joints. Thanks!!! Eric

[@davidvasher6752]

Hi Eric thanks so much for watchin. I just use a regular torch tip, have to work it back and forth a bit, just keep it an even stroke back and forth. 1by 12 is just a matter of choice. I like the look of the strips better with the rounded edges. Have fun building, check out the wavy flag video, also fun to do. Have a great day.

[@erictreptow1549]

@@davidvasher6752 I did watch the wavy flag video today. Love it. Going to do a few simpler ones first.

[@WayneJordan13]

Nice video for sure. How wide did you cut the stripes? Thanks!

[@davidvasher6752]

Hey david, strips are 1 1/2 by 3/4.thanks for watching

[@WayneJordan13]

Thank you for the reply! 😊

[@VtwinGuy5]

Beautiful job! How much does a flag like that sell for in Michigan?

[@davidvasher6752]

Hey thanks for watchin, i get $100.thonk i could get more but im happy with that.

[@johnmanfredo422]

very very nice work.

[@davidvasher6752]

Thank you john, thanks for watching, have a great night

[@Dan-wo9bb]

Hi. Great. Job. // what. Size. Of. Is. Flags. U. Make ??

[@davidvasher6752]

19 by 37.thanks for watchin.

[@YoupiePlaat]

Nice work, where can i find the minwax Red, and the Bleu collor. Do you have a link....thx.

[@davidvasher6752]

Hello there my friend, i dont have a link. But I go to lowes and they mix it for me. I also believe menards does it. Thanks for watching.

[@michaelfritz7833]

Great job!! Awsome!!

[@davidvasher6752]

Thanks mike, hope you build one. 👍🇺🇸🇺🇸🇺🇸🇺🇸

[@jstu45]

I like the stars outlined only.

[@davidvasher6752]

Okay. Thanks for watchin my friend, 👍🇺🇸

[@sabmunoz309]

What size stencil did you use

[@davidvasher6752]

@@sabmunoz309 10 1/2 by 15.thanks for watching.

[@PAPATexas]

Good job David!

[@davidvasher6752]

Thank you papa. Im amazed how many people have watched this. Again thank you and please keep watchin my videos.

[@JoseHernandez-mj6ne]

Beautiful work sir. I was wondering if you can do a video on a coin flag holder?

[@davidvasher6752]

Thank you. I will look it up. If i do it will be a bit. But stay tuned

[@JoseHernandez-mj6ne]

@@davidvasher6752 awesome. Thank you sir

[@davidvasher6752]

Jose, workin on coin flag this week.

[@JoseHernandez-mj6ne]

Awesome brother

[@ryanohalloran4401]

How far apart are your braces on the back of the flag? Great job!

[@davidvasher6752]

Thank you ryan. I keep the 2 outside braces centered at 32".just equally space the inside ones.

[@gregalley3396]

How much does that particular piece sell for.

[@davidvasher6752]

Hey greg, the flat flags sell for$100.00.Thanks for watchin my friend. 👍🇺🇸

[@truthh8322]

Made.my first one using 2x8. Gonna try one using 1x8. Hard to find 2x anything that is straight

[@davidvasher6752]

@@truthh8322 thats awesome truth. Like to see some pics. Its fun stuff aint it? 🪚🔨🇺🇸

[@erwinbenally8027]

So you don't glue in-between the slats , just on the back?

[@davidvasher6752]

Thats correct, dont need the glue sqeeze out

[@SamuelAustin-l7j]

thank you for the video!!🙂

[@davidvasher6752]

Thank you for watching👍🇺🇸

[@renamgarber8592]

I am deaf but love to watch how to make it pls type in what size is the board to cut or inches etc!

[@davidvasher6752]

Hi Rena, thanks for watchin. Im wondering, is there not C. C. On utube. I will try to do better, sorry. Keep on watchin , more to come.

[@JoseHernandez-mj6ne]

Hey David can you tell me how much for the flag?

[@davidvasher6752]

As of right now i just sell them locally for $100.

[@grumpa328]

Where do you get a white pencil to mark the stars?

[@davidvasher6752]

@@grumpa328 its just a prncil I have started using a ball point pen now

[@averageoutdoorguy2737]

Really awesome

[@robnj7639]

Great work! Do you sell these?

[@davidvasher6752]

I have been selling locally and at a few craft fairs. Try to keep it a hobby as i work 50hrs a week as a machinist. Thanks for watchin rob

[@kirksides7504]

What are the stains you use?

[@davidvasher6752]

Hey there kirk, minwax crimson and navy blue. They will have to mix it for you. It is semi transparent stain. Thanks for watching. 👍🇺🇸

[@raygonzales443]

Great job they look really great

[@davidvasher6752]

Thanks so much ray, and thanks for watchin. 👍🇺🇸

[@dianeadams9537]

I LOVE YOUR BEAUTIFUL WOODEN AMERICAN FLAGS!!! THANK YOU FOR SHOWING US HOW YOU MAKE THEM!!! ❤💙❤💙❤

[@davidvasher6752]

Well thank you for watchin, i luv all the nice comments👍🇺🇸

[@martywhitehurst3042]

Do you leave the white stripe natural

[@davidvasher6752]

Hey marty, i do some people stain it but i think it looks best natural. Thanks for watchin

[@lightningfisher8177]

nice job dave!!

[@davidvasher6752]

Thank you! And thanks for watchin

[@armandodiaz67]

Just curious... why don't you glue the individual flag pieces together?

[@davidvasher6752]

You could if you wanted , but im putting the support strips on any way, so just glue them. If you glue them individually the glue probably squeeze out and make a mess of you stain job. Thanks for asking and thanks for watchin. 👍🇺🇸

[@jsg2773]

Is your union stencil 11 x 8.5 ?

[@davidvasher6752]

10.5 by 15 my friend

[@jsg2773]

@davidvasher6752 Thanks ! Looking forward to giving this a go. Very beautiful work

[@robertdiffin9136]

Just found you…love it!

[@davidvasher6752]

Thank you for watchin , have a great day

[@poppy.fishing]

Amazing job!

[@davidvasher6752]

Thank you vaughan. And thank you for watchin... 👍🇺🇸

[@erwinbenally8027]

Where did you get the name brand

[@davidvasher6752]

Someone got that for me as a gift 40 yrs ago. But go online and you can get them. 🇺🇸👍

[@sherylgruhler1336]

Beautiful!

[@davidvasher6752]

Thank you and thanks for watchin👍🇺🇸

[@joebuck49]

I like the razor blade trick

[@davidvasher6752]

Why thank you joe, and thanks for watch, next video will be tht wavy flag.

[@bobcansee]

Nice job!

[@davidvasher6752]

Thanks for watchin sir🇺🇸👍

[@alecadrian3068]

awesome

[@davidvasher6752]

Thack you alec🇺🇸👍

[@emvincent3742]

What are the dimensions of the stencil that you use for the stars?

[@davidvasher6752]

10 1/2 by 15.0rder them online. Thank you for watchin👍🇺🇸

[@johncoonradt9000]

Cut the ends of the back braces to a 45 degree it much neater that way

[@davidvasher6752]

Thanks for the advise and thanks for watchin

[@jameshubbard4563]

Where did you get the star sheet?

[@davidvasher6752]

Hey James , just go online and google american flag union stencils. I ordered a pack with different size and betsy ross ones to. Thanks for watchin👍🇺🇸

[@JLindbert]

What size stencil do you use?

[@davidvasher6752]

Stencil is for 19 by 37 flag. Just order on Amazon.

[@davidvasher6752]

@@JLindbert stencil is for a 19 by37 flag. Just order on Amazon.

[@averageoutdoorguy2737]

How much do they cost

[@davidvasher6752]

Have not sold any off utube . I have shipped a few. With shipping $125.problem is im not really set up for payment. Just havin fun for now. Thanks for watchin. 👍🇺🇸

[@WyteXLighting]

Do a american dixie flag I'm thinking about making dixie flags out of wood

[@davidvasher6752]

I will check it out

[@hjets5387]

Do you sell these?

[@davidvasher6752]

Just local john. It is just a hobby. For now. Thanks🇺🇸👍

[@hjets5387]

@@davidvasher6752 That's too bad, I just don't have the equipment to do these. You do a great job. Wife has been wanting one for a long time but locally they're pathetic. You're not anywhere near the east coast of PA are you?

[@davidvasher6752]

John. I will have to figure how to collect payments. Give me time.

[@hjets5387]

@@davidvasher6752 I appreciate watching videos of this sort. Unfortunately, unless you're going to make a ton of these, for me at least, it's cheaper to buy one from a craftsman. The cost to buy the required stains and varnish for a one time build is prohibitive. Then, according to my wife, she wants one that she can display outside.

[@bigcountry7852]

Very nice very good work,👍👍👍👍👍

[@davidvasher6752]

Thanks for watching my friend👍🇺🇸🇺🇸🤠

[@mrwhistle4637]

What are the dimensions of your flag stencil?

[@davidvasher6752]

Hey there sir, thank for watching stencil is 10 1/2 by 15.youcan order a package with standard and betsy ross unions, have fun be safe

[@cabman86]

I use a big driveway torch for my burning with a propane tank. It's so much faster.

[@davidvasher6752]

Hey roger thanks for watchin. Im going to be lookin into that or a faster method, but honestly its just a relaxing hobby for me, no hurrys.

[@jimmyPOUFAJones]

@@davidvasher6752 Why rush......

[@meganhopexx]

awww merlin

[@davidvasher6752]

Whatta bout brook👍🇺🇸

[@claytonsimplot9554]

I don't understand you flipping the board over and dropping it to the bottom of the jig. The grains don't match ,so why not just flip them over?

[@davidvasher6752]

Thats a good question, the answer is if you just flip them as you say and assemble your union will be on the wrong side when you flip it back over. Thanks for watchin clayton.

[@ryananthony4840]

You should be getting at least a grand a piece for these!

[@davidvasher6752]

Thank you so much, actually sell them for much less. Wavy ones a bit more. Next video will be an updated one from my last wavy flag video. Thanks for watchin👍🇺🇸

[@hawkwrangler1950]

Only thing I do differently is I don't wipe the stain off and it looks the same as these.

[@davidvasher6752]

Good tip i appreciate that. Thanks for watching and keep on buildin

[@cathybenson5119]

Have you ever made flags from other countries?

[@davidvasher6752]

Not as of yet. Thanks for watching. 👍🇺🇸

[@terrancetenley2786]

Very nicely done! A quick point of correction, your small flag on the wall is hung incorrectly, the stars on the American flag should always be on the right...

[@davidvasher6752]

Oh man. Next video it will be right thank you very much. And thank you for watchin. 👍🇺🇸

[@terrancetenley2786]

@@davidvasher6752 I should have said the stars on the left, but thanks for fixing!

[@davidvasher6752]

Fixed em lol.

[@Cowboy_Steve]

@@terrancetenley2786 I was firing up the reply button but you corrected yourself lol! Thank you! A lot of people don't know the stars go in the upper left when hanging both vertically and horizontally.

[@chuckwelden972]

Not true ,when flag is displayed on wall,whether it's hung verticaly or horizontal the stars should always be on the upper left to the viewer

[@lindarogers8994]

Love your video, have you ever thought of using a CNC bit in a router to do the stars. Please take a look at fishtank5050 on KZbin he doesn't use any fancy power tools, he works out of his tiny garden shed he's very good at explaining the making process just like yourself.

[@davidvasher6752]

I will check it out. Im a machinist for a living for 40years.last thing i want to see at home shop is a cnc lol. Thanks for watching.

[@davidvasher6752]

Sorry linda, misunderstood, watch video, i get it now, no cnc machine Thanks for the idea.

[@lindarogers8994]

You're welcome.

[@warpo007]

shame you didn't do a nice flag... like an Australian one..... I'm joking! Great work David!

[@davidvasher6752]

Lol send me a pic you never know, and hey, thanks for watchin. More to come👍🇺🇸

[@theyarddogs4100]

Aws

[@hernandotatis1302]

I doubt thats gonna fly...

[@davidvasher6752]

Thanks for watchin Hernando. Gonna lighten em up a bit. Lol

[@robertm348]

Great project, but you put me to sleep! B-O-R-I-N-G-! Condense to less than 20-minutes!

[@davidvasher6752]

Thank you for watchin. Im falling asleep too👍🇺🇸

[@southernbelle4266]

Just so you know some of us need detailed information. I think he did a fabulous job of explaining step by step

[@robertm348]

@@southernbelle4266Belle I agree, but he takes far too long to explain each step. Detailed information is essential, and I am not saying he is not doing that, but he is not an accomplished, effective speaker if it takes him more than twenty minutes to explain his process. I hope he will learn to make his videos half of what they are currently. Scripting and preplanning are essential or you lose your audience. I like him and want to continue to learn from him instead of having a nap while he drags out information and repeats ad nauseum!

[@lbs2821]

He put this out there for our benefit and you insult him…..feel good about that? Great project and great video!! Don’t listen to Robert, if it was raining silver dollars he would bitch about having to bend over and pick them up!

[@robertm348]

@@lbs2821 I would use a shovel.

[@DTD-no7wl]

What a beautiful flag what is the price for one?

[@davidvasher6752]

Y thank u, i sell them local for 100.i have no payment system set up. I have shipped some to out of state friends and shipping was $25.thanks again