HOW TO BUILD AN DIY AEROPONIC CLONER | SPONSORED BY MARS HYDRO

[@littlenugs9942]

The window seal does work if its oversized. I found it's just easier to get a squeeze tube of sealant and replace it when I use it, or a five gal. Bucket works well with there lids. Thanks for the diy project. 👍

[@heywoodjablome5630]

For the algorithm. Respect, Hatman.

[@madhatterorganics9944]

Thanks dude!

[@shainhahn]

r.o. or distilled water definitely helps. I just used a turbo kroner for the first time and learned my well water has way to much calcium and cloggs up the pump. I think I will build one of these one though.

[@madhatterorganics9944]

Yes forsure, I use a RV filter to clean out and harmful chemicals and what not and have had decent luck with it so far. Thanks for tip!

[@moustachemike3098]

Great DIY cloner!

[@bonzhaigardenguy2316]

The weather strip my guy! I used it on my build, works like a charm. It’s a little tricky building them

[@Mammakush420]

Awesome! Thanks

[@phillygrown9583]

awesome diy setup homie!

[@madhatterorganics9944]

Thanks dude!!

[@phillygrown9583]

@@madhatterorganics9944 thank you for sharing!

[@dertythegrower]

Classic. We used to make these in colorado with the big yellow top tote, and it was only like 44 bucks total with all the pvc and pumps and all. We cannot believe how much profit the cloner companies upcharge heh.

[@madhatterorganics9944]

Right! Its insane some of these companies charging 200+$ for these.

[@heywoodjablome5630]

7:05 ...adhered

[@madhatterorganics9944]

Hahaha thanks dude, thats the word i was looking for lol

[@mariusadam4429]

i've never used one whats the real advantage? i do the old school peat pucks,dome ,under flc,and get a honest 90% success rate in 3-10 days some strains take right off others seem a bit stubborn and i;ve run literally 80-100 at a time. so whats the plus ? just seems like another mess and cost,great vid i really like your content,thks!!

[@madhatterorganics9944]

Every one has their own way of cloning for sure, I’ve seen amazing results with this method and it’s typically 100% success. I’ve found that this is the best way for successful cloning for my self and its a nice way to be able to pick and choose which media you want to transplant into and never having to worry about over or under watering clones.

[@mariusadam4429]

@@madhatterorganics9944 good point on the watering-i might make one for fun,when i find someting with a water tight lid thanks for the input

[@madhatterorganics9944]

@@mariusadam4429 I might run a bead of silicon around the lid instead of using the window gasket, it works but i think it might be more of a pain in the ass down the road.

[@b-ra9078]

@@madhatterorganics9944 better yet, turn the top of the manifold down so that the nozzles are facing down. That way they still spray out horizontally and hit the roots but without the mess or need for a seal of some kind around the top of the bin. That’s how I’ve got mine set up. Works a charm, absolutely no leakage. If you’re like me, this will allow you to run the system with the lid off and have a peek at your project in action without coming into contact with a single drop of water. Great video!

[@Chris-cq5dy]

That very cool doing your self hope it works good now you got me inspired to make one great content great tips Great show. ✌🔥💨 Ps I have a question iam getting in to hydro my problem is I usually soak my seed first in 💧 do I still do that before I use my Dome or should I just put my seed right in the Dome do I just spray the top and how much 💧 do I use in the bottom of the Dome that's my only problem I can get them started and soil no problem but in the dome I gotta get a technique for the Dome hope you can answer this question.thanks great video Great concert Great tips Great show ✌

[@madhatterorganics9944]

What do you mean by dome?

[@mocoloco5938]

How much did that cost to do? Looks nice man good job

[@madhatterorganics9944]

Pump-25$ Fittings-15$ Pipe-10$ Spray Nozzles-10$ Tote - 12$ = 72$ canadian. So 55-60$ US.