Рет қаралды 24,592
An iMOW® garage will protect your STIHL iMOW® from rain, wind and weather during the mowing season: In this video you will find out how you can build a practical and decorative garage for your robotic lawn mower in just a few steps.
Learn more about the STIHL robotic mower iMOW®:
www.stihl.com/...
And about the GTA 26:
www.stihl.com/...
Required material:
Square timber of 60 mm x 60 mm for posts, 2.5 m
Construction wood 50 mm x 30 mm for the frame, a good 7.5 m.
Construction wood 44 mm x 22 mm for holding the boards on the back wall
70 mm x 12 mm boards on the back wall and from the storage compartment, a good 7 m. Dimensions: boards on the inner wall 740mm x 70mm x 12mm; outside / back wall 608mm x 70mm x 12mm
Remaining wood for the 30 cm high spacer and for fixing the posts
18 mm plywood / multiplex for roof, floor and doors from storage compartment door: 260 mm x 250 mm x 278 mm x 175 mm; Floor 740 mm x 309 mm, roof: 740 mm x 333 mm
Metal rod 1 cm with a slightly pointed end as a support, 95 cm long
15 mm OSB board, 1150 mm x 820 mm
Roofing felt
40 Wood screws 4 x 70 mm (for the frame), 60 wood screws 4 x 35 mm (for the back boards), 3 x 16 mm (plastic edges from the roof and tension lock), 4 x 40 (including washer)
2x 10 cm hinges for the roof including wood screws 3 x 16 mm and 4 x 45 mm
Two smaller 50 mm hinges each for the door of the storage compartment including wood screws 3 x 16 mm
Tension lock made of stainless steel 74 mm long for the lid
20 mm x 25 mm PVC rectangular angle
4 mm metal drill bit
Required tools:
STIHL GTA 26
Cordless screwdriver
Spade
Bevel (angle to measure)
Spirit level
Hand auger
Hacksaw
4mm metal drill bit for the support rod
Thanks for watching. Did you like our video? If so, feel free to like this video and subscribe to our channel.
---
Facebook: / stihl
Twitter: / stihl
Instagram: / stihl
Website: www.stihl.com/
#chainsaw
#woodwork
#howto
#lawnmower
#tutorial
#diy
#buildshed
#gardenshed
#craft
#gardenproject
#STIHL
#imow
#GTA26