How To Build An X-Carve Flip Top Table | Woodworking

[@Farris-rw6fo]

Appreciate the video. My son and I built the flip table. Thank you for the great idea.

[@StonerEricson]

Awesome thanks for watching happy woodworking

[@007JHS]

I'm impressed with your two assistants... heh heh heh

[@christinepease1001]

That's so cool! You're unstoppable! Can't wait to see you actually carving something!

[@smokeydamoose2387]

this is a great idea. been racking my head around shop layout for a CNC that has a 50x34 working area. This may just work to save space.

[@StonerEricson]

It has been a huge space saver in my shop I’ll let you know when the videos out

[@SleepWithCJ]

Great video. By far my favorite Xcarve cart build so far. I bought a used X-Carve today and I expect I’ll be building something very similar this week. Subscribed and liked. Thanks for sharing.

[@StonerEricson]

Thanks man means a lot

[@jonathandeanthelin]

Love the "Shop Dogs" just hangin out and workin with you! Also, did Craig come up with the Kreg Jig? If not, then who? And I too have had the Kreg Jig pull my board forward, so nice hack using the clamp as a stopper! I now gotta get me some clamps! Lastly, my fave part of this vid was when you were caught startled by the camera, that smile, priceless! Wigawhawm On!

[@rspawpizzy5737]

Can you give me the exact measurements for this table and side attachment I bought an x carve that has not arrived but I loved your idea.

[@skyworld880]

Any plans available yet?

[@StonerEricson]

Yes, I have a whole video on plans how I built it watching me build it check the channel. There’s a lot of them. It’s one of my favorite things in the shop although my Dewalt 611 router just went out for the second time so I had to buy another one though so that’s number three for me thanks for watching. Happy Woodworking.

[@grumpywoodchucker]

Great build!

[@StonerEricson]

Thank it works really well

[@intohouse]

I’m in the process of designing/building my flip top table for my CNC. I didn’t want to have a gap between the table and the sides, so was thinking of countersinking my washer. Would that even work, as I’ve never seen anyone do that

[@StonerEricson]

No u need that gap so I will fill Correctly plus overtime the word will expand and contract a little bit you just want to make sure you give yourself that room so it doesn’t bind up overtime making it too tight so I would highly suggest the washers thanks for watching let me know how your table turns out

[@zacharybaker7843]

Did you get plans put up for this anywhere yet

[@StonerEricson]

There is a cut list video and a few people have built it with those 2 videos butt I haven’t had time to draw it up on sketch up yet it is on my list thro thanks for watching

[@miguelbikenbrew1337]

Have you made plans for this yet?

[@conandlloyd]

Any luck on those plans? I'm only asking because I plan to shamelessly copy your stand and hood for mine.

[@StonerEricson]

I haven’t had time yet butt I will put it on my list in the shop that way I won’t for get

[@tvicecity]

Great video 🙏🏾! I'd be very interested to see those plans too

[@chuckcross7323]

Do you have plans out yet? Seen in video where you say was coming.

[@StonerEricson]

There is a cut list video on my channel

[@haroldhiser9529]

Plans for sale for this build?

[@StonerEricson]

I don’t have plans for sale yet there is a cut list video for free there’s also a cut list video for the enclosure and another video on how I run the wiring thanks for watching

[@smokeydamoose2387]

can you do an update video?

[@StonerEricson]

Yes

[@StonerEricson]

I’m going to do the update video this week. If you have any questions about specific things on it, let me know and I’ll answer that for you in the video.

[@franzsteiner5995]

Building this tomorrow. I watched your other video of the enclosure. You mentioned issues with the wires. Do you suggest making a bigger table top size. For example 60”x48”? Liked and subscribed. Been enjoying your Instagram and KZbin videos. I been having some free time since being back from Afghanistan and I want to get into making Rustic Wood Flags to help distract some inner demons. I am in Military housing and have one car garage. So this idea of a small foot print is great. Thank you 🙏🏻 so much for the great videos.

[@StonerEricson]

Sweet man thank you so much for your service I really respect it man without people like you there is no Ericson design company seriously the table size is fine and I actually made a video on the wiring for Chris one of my subscribers he had the same kind of questions and I kind of show you how I ran the wiring and how that all works because I was worried about that so there's a video on my channel about that The heart and soul my channel is idea design build once you start you'll realize there's so much you can do just unlimited things you can do I love the American flag thing for me getting lost in the sound of the saws and the detail of the measuring tape in the final finishes truly is the most relaxing thing in the world all the best to you share your project with me on Instagram I'd love to see what you make thanks again for watching means a lot I work hard on those videos and its a ton of fun I love to collaborate on project with you and put in one of my videos that be kind of cool

[@franzsteiner5995]

@@StonerEricson thank you so much! I will definitely watch that video. The whole time I’m watching the enclosure video. I’m like how is her going to pull off the wire issue. Thanks again man! 🤙🏻

[@ashleycarlisle1820]

How did you attach the XCarve to the table top?

[@StonerEricson]

Just screws

[@gog1569]

Do you have plans for this design

[@StonerEricson]

Yeah, there’s some videos on my page thanks for watching means a lot.

[@gog1569]

How far apart, did you put the kreg holes

[@gog1569]

Also where did you put the dowels on the cabinet side

[@StonerEricson]

About 6-8 inches

[@StonerEricson]

@@gog1569 I’m going to do an overview of this cabinet and CNC stand this week. I’m gonna do a video about it so ask me any questions you want and I’ll go over them in the video

[@johnjarocki9754]

Where are the plans, couldn't find the video?

[@StonerEricson]

There is a cut list video on the channel have fun building it thanks for watching by the way

[@StonerEricson]

kzbin.info/www/bejne/apO2eIarf7ufrcU Here is the link

[@kristophercarroll4556]

Are there plans for this yet?

[@StonerEricson]

Ya there is a cut list and plans video on the Chanel plus a video on how the wiring works with the enclosure and flip table one of my subs asked for

[@kristophercarroll4556]

@@StonerEricson Thank you so much for your response. As far as the Kreg Jig goes, I got one today so I could make this stand and I was just wondering what angle you were drilling at and what size screws did you find work the best for the table top?

[@StonerEricson]

@@kristophercarroll4556 Welp it’s all out of three-quarter inch plywood so the screws that you will use are the 1 1/4 and the Craig Jig will have that setting right