How To Build Boat Trailer Steps

[@jas8256]

I do not have access to a welder so I purchased an Easy Step out of Tyler,Texas ... Delivered in 24 hours !!! Thanks for the video ... wish I had seen it a couple years ago

[@johnsimons9039]

I tried building me some awhile back. Them 20 penny nails i used made a mess outta my boat didn't think about putting them on the trailer. Awesome.

[@FishinNStuff]

Now you know how too do it , thank you for watching buddy

[@UncleHarley]

Bet you used a claw hammer to pound em on the boat?....WRONG, pound em in with a ball peen hammer. no worries.

[@herbertmeade348]

what a joy watching a real craftsman at work...awesome!!!

[@FarmerD78]

This is perfect timing I just bought a “new” to me boat yesterday and was thinking about a set of steps to get in. I just hope mine comes out that good he does nice work

[@FishinNStuff]

Yes he does do really good work . And he has better welders than I do lol

[@LifewithAaronArnold]

Same here!

[@NotoriousMastaG]

Thank you I purchased 60,000 in machinery to make my cheap steps! Well worth it!!!!!

[@FishinNStuff]

You can make em from a 200 dollars worth of Harbor Freight tools if you had any fabrication skill

[@christopher63234]

Middle of the pandemic and not a hair out of place. Another cool video!!

[@FishinNStuff]

Lol well that's cause I cut my own hair too haha . Stay safe and Happy Easter brother

[@graff4143]

Competition is a good thing ! Excellent workmanship in a niche market. Best of luck !

[@centralcoastcamper9631]

Your friend does nice quality work. I like his step designs. Perfect for a boater single handed launching and retrieving when no dock is present at a launch ramp.

[@FishinNStuff]

Yes Sir that is what I was thinking too

[@ScotWalt858]

Master Craftsman. Always a pleasure to watch them work. Thanks for sharing!!

[@FishinNStuff]

I agree brother , he's good at what he does

[@jenky1044]

Great show thank you. I hope you and your family have a blessed Easter.

[@FishinNStuff]

Thank you Sir , Happy Easter brother 🐣

[@1Whitetail]

Excellent video, I have the same problem getting in my Tahoe, differently need to call about those steps. Thanks for spreading the word.

[@jonmartin6451]

I need these! I’ve had 6 ankle surgeries on my right ankle. I’m calling The great outdoors

[@FishinNStuff]

Ask for Hunter

[@chrisjones3946]

Love it! Steps are super expensive! I like the fact that he is local too! I will call today.

[@chrisjones3946]

Actually, I will need to wait until this weekend when I can get some pics of my trailer and boat for you!

[@donthornton7528]

What a awesome upgrade time and money well spent. Happy Easter to all.,...

[@FishinNStuff]

Happy Easter brother

[@matthewanthonyoutdoors1364]

He done a good job on them! I'm an old school welder,arc welder and cutting torch guy, then side grinder. wish I had a plasma cutter and wire welder. Good video

[@FishinNStuff]

I want a plasma cutter too man , I know exactly what you mean . Happy Easter brother

[@mrdilligaf1968]

Really nice set of steps there. They're a great idea. While we haven't fitted steps , we did fit steel mesh to the floor of the trailer so we can walk out on it in the water. It puts a barrier between us and saltwater crocs. Cheers and hope you had a great Easter up there !

[@FishinNStuff]

That's a great idea man

[@littlefishman6767]

I understand I wish he could mount them

[@terencegillespie6675]

Thank you. I watched it twice. I’m gonna build on on my trailer.

[@FishinNStuff]

They are nice

[@Vincentdonnelly5158]

Is there anything you cant do. Your a genius. A bloody genius. Great video.

[@FishinNStuff]

Thank you but I didn't build them lol

[@glennscatfishing]

Man those are exactly what I need!!! I will be contacting him. Happy Easter, he has Risen !!!

[@FishinNStuff]

Amen Happy Easter brother . I got a new phone Glenn give me call buddy

[@richardshook8645]

Incredible craftsmanship!!

[@FishinNStuff]

He's good , I appreciate it brother and I know he does

[@burresscounty]

Never saw steps like this before. Man they are nice!

[@FishinNStuff]

Thank you Sir

[@jessehskelton]

I’d much rather buy these than some big box stores over priced crap! Keep up the good work!

[@terencegillespie6675]

Thank you for your intro to this design. You’re good.

[@FishinNStuff]

Thank you Sir for watching

[@donewing2536]

Great steps. If I wasn't so old and stove up, I would build a set.

[@FishinNStuff]

Thank you Sir

[@Noahlochner0]

I'm building a trailer for a boat that I'm building here in a few months and I think I'll have to build me some steps like this! thanks for the video!

[@FishinNStuff]

Yes Sir I've got several boat Diys , I appreciate you watching brother

[@Noahlochner0]

Fishin N Stuff keep up the solid work man! 👊

[@FishinNStuff]

Thank you Sir

[@rasputinsorphan1260]

Congratulations Joe S.! and... Very nice steps!

[@FishinNStuff]

Thank you Sir

[@rasputinsorphan1260]

@@FishinNStuff No thank you. I have made one of the fishing pole holders and am currently working on an underwater light. I really appreciate these diy videos as they are keeping me sane. Keep 'em coming.

[@FishinNStuff]

I know what you mean buddy

[@alabamaclickerfisher]

Cool. Really like seeing things come together on a project.

[@FishinNStuff]

Me too , that's why we do it . The satisfaction of the end result

[@mikecha1957]

Those steps are pretty neat Keith. I've seen some like them before. I would love to have a set for my boat. My old knees ain't what they used to be.

[@FishinNStuff]

I'm right there with you buddy lol . I appreciate you brother

[@kipwright148]

Good stuff. Price is cheaper than an ER visit if ya slip getting in at the ramp. Also for some reason video stopped missing s way on my end. Got the “Something went wrong message”

[@FishinNStuff]

Hmm that must have been KZbin or wifi . I appreciate you watching brother

[@brucemcmillan8750]

Great idea ,great design ,my new boat install and tough to get in from the front

[@FishinNStuff]

They are really nice. I want some too lol

[@brakemadness]

Your buddy is currently only handling local orders. You got me all excited!😛

[@FishinNStuff]

Yeah he only does a trailer he can measure

[@michaelrogers4285]

Great video, with some awesome information 👍. You’re a very good fabricator as well . Stay safe and healthy my friend 🤴

[@FishinNStuff]

Thank you brother, and Happy Easter 🐣 to you and your family

[@michaelrogers4285]

Fishin N Stuff same to you and your family 🐇

[@jeffjackson5331]

Congrats to Joe S. Awesome build! Cool looking steps.

[@FishinNStuff]

Thank you Sir , I appreciate you watching brother

[@jeffjackson5331]

Fishin N Stuff you’re very welcome. I enjoy watching your diy’s. Gives me alot of ideas. Thats dangerous lmao.

[@FishinNStuff]

@@jeffjackson5331 lol

[@jbone4217]

I have to do this for a friend but I'm nervous, I just finished welding school and want to do it good. This would be my very first job. He said he just wants something simple, again I'm new to this all but I want to do a good job. His boat is a little bigger too. It doesn't have to be like multiple steps he said, just like 1 where he can pop up easier.

[@KBAnglers]

That's an awesome idea!!! Build one for each side and you have a landing guide when pull up on the trailer!!! Plus, by having one on each side, it allows you to get off or onto the boat from either side!! Stay safe, my friend... This "Coronie" mess will be over before you know it!!!😂

[@FishinNStuff]

I hope so brother , you stay safe too man

[@joshlindsey7067]

Happy Easter Fellas! Really cool meeting you both at the Catfish Conference.

[@FishinNStuff]

Good meeting you you brother i appreciate it , Happy Easter

[@joebuck66]

Very cool diy. Congratulations to Joe. Great video my friend.

[@FishinNStuff]

Thank you brother

[@SluSharkND]

That IS cool. Thanks for sharing and stay safe. Happy Easter!

[@FishinNStuff]

Happy Easter brother

[@benberry703]

Great video, those steps are great and I just may have to get some. Thanks for another great DIY and keep them coming.

[@FishinNStuff]

Them you Sir , they really are great

[@michaelosmon]

It looks like the tongue swung starboard, if it were mine I might have made it for port. Maybe there was a reason. This was awesome, I've never seen this but now I need it lol. I appreciate you. Thank you for sharing your skills knowledge and experience

[@FishinNStuff]

He has made them both ways but it's harder than you think to step over the trolling motor and most boats have ove

[@michaelosmon]

@@FishinNStuff yes I would think that is difficult, i figured there was a reason. Anyway this is cool I'm going to make one for my pontoon trailer, i have another design in mind but this inspired me. Thanks again and have a blessed day.

[@bwcok7947]

Happy Easter and Stay safe and healthy buddy! That is perfect timing! My new boat and trailer are going to be so happy with these new steps! Bad thing is we can't even take her out to break in the motors on her yet. TA DAY we hunker down so TA MORROW we can fish!

[@FishinNStuff]

That does stink man , but you stay safe and you'll be out there before you know it

[@martydennis]

Those are awesome! Will look real good with my t-shirt! Oh, and the cutting board.you are going to send me!

[@mr.diyhowtopaintingwelding4479]

I build them too.they are a pain in the butt and every trailer is different

[@carnufiasfishing8444]

Wow! Your buddy is awesome bud. My hats off to him 👌👍👊😎. Congratulations to the winner of my fly vise 😂. Thanks for sharing brother 👊🎣😎

[@FishinNStuff]

Haha you so funny , you always crack me up . He still hasn't replied so it might be yours lol

[@redneckradtech1202]

Yall have made an awesome help video here. Thanks

[@PalmettoCats]

Awesome! Happy Easter!

[@FishinNStuff]

Happy Easter 🐣 brother

[@kentuckycatmanoutdooradven4643]

Those are awesome!!!! If you’re only need 1set be better off just buying some from him!!!!!

[@FishinNStuff]

I agree that's a lot of figuring lol

[@delsmithfishing2891]

Super awesome , I need some for my ranger !!

[@FishinNStuff]

Ranger makes some but there's is 700 dollars. They are very cool 😎

[@rodneyhardee2527]

Another great video. May have to try a set of those.

[@FishinNStuff]

They pretty dang 😎 cool man

[@catfishstalkeroutdoorswith530]

Awesome video! I will be contacting them to order one. Thanks!

[@jefferyturner7820]

Those steps look great , been looking for a set on my Tracker Grizzly 2072 how much would something like this cos5

[@FishinNStuff]

I don't know if they ship.em or not , but you can call the Great Outdoors in Cherryville NC , just Google it and the numbers on there they can tell you more accurately than me

[@jefferyturner7820]

Fishin N Stuff thanks brother I’ll give them a shout

[@FishinNStuff]

Yes Sir

[@jacobmitchem8596]

Awesome build yet again! Nice to see some local boys spreading some wisdom on KZbin! ( great outdoors is 15 min. From my house). Happy Easter!

[@FishinNStuff]

Happy Easter brother , I hope the lord watches over you and yours

[@jimbirrell6016]

Nice steps how much would the finished item weigh say 4 to 5 steps as Australian boats different to your bass boats I have a Tabbs tinny { aluminium} 4.6m ill try and attach a pic.

[@FishinNStuff]

I would guess around 40 to 45 lbs maybe I have some now . They are a little heavy but they are super strong . You could sacrifice strength and make em a little lighter

[@JustFishingTV]

Those steps are really nice.

[@FishinNStuff]

I agree lol they really are cool

[@UncleHarley]

I should get started on a set of these Ta DAY! since I watched the video ta DAY!!

[@FishinNStuff]

You should do it Ta morrow lol

[@FunniestUnfunnyGuy]

Hey my friend just stopped by to say happy Easter smile and laugh often.

[@FishinNStuff]

Happy Easter

[@gwb19661]

May Have To Make A Set For My Boat!!👍Gettin' Old Sucks!😁

[@FishinNStuff]

Yes Sir getting old does SUCK hahaha 😆 They are really cool

[@myrlc4623]

Nice set of steps!! Where can I get one for a Bass Tracker Pro 175?

[@FishinNStuff]

You'll have to contact the Great Outdoors

[@smokinhic]

Love my steps from trick step. They are a little spendy but worth it imo😉🥃🇺🇸. Looks like those would work just as well👍😉🥃🇺🇸

[@FishinNStuff]

I want knocking Trick Steps even my buddy says they make great steps . I was just showing how you could make your own

[@smokinhic]

Fishin N Stuff Never thought you did. 😉🥃🇺🇸

[@daviddura1172]

HAPPY EASTER, stay safe and healthy.......

[@FishinNStuff]

You too brother stay safe and happy Easter 🐣

[@stillinyaisstillinur3300]

!CONGRATS to the winner

[@tnt421]

They are Awesome!

[@crude4u1948]

Are you using the same torch to weld that you cut with?

[@FishinNStuff]

No he was using a plasma cutter to cut the steel , and a mig welder to weld with

[@jamesmushinski9872]

HAPPY EASTER !!!!!!!!

[@FishinNStuff]

Happy Easter

[@chuckcrabbe3253]

Looks great

[@Sweethomemovers]

Great video

[@johnnybx3254]

Great steps 👍👏👏

[@CatfishandCrappie]

Those steps are freaking awesome! And this is coming from a guy who owns a POS Shoreland'r' Trailer. Man I hate that thing. LOL Happy Fishing Buddy and Happy Easter!

[@FishinNStuff]

Thank you brother I'm sure he does too . I agree his steps are some of the best out there

[@keepitsimple257]

Nice video man do you know if he ship them to Vermont I’m planning to buy some for my boat this week.

[@FishinNStuff]

You can call the Great Outdoors in Cherryville NC and you'll have a better chance probably . I know the shipping would be high for him . They are made from 5/8" steel so they aren't light you know

[@keepitsimple257]

Thanks man I will call to see I really like does steps they look well made.👍🏼 stay safe brother.

[@FishinNStuff]

You too brother . Ask for Tyler or Jason and you'll get more help

[@charlesdriggers199]

There you go again. Giving me ideas............

[@FishinNStuff]

Haha 😄 I'm the same way

[@CatfishWeekly]

That is a great build!!!

[@FishinNStuff]

Hey i heard from the guy that order those steps that he heard about em , on your show Catfish Weekly

[@CatfishWeekly]

@@FishinNStuff Outstanding!!!!!

[@briancsmith11]

Help. I need you to do a DIY video for us please. I have a kayak and want some rod holders (like Scotty) to screw down. I am not talking about the pvc rod holders that people have made for transporting rods. rather I mean the rod holders that u put rod in when u are actually fishing. I have looked on KZbin and there are no videos showing how to make these. I just bought a fishing kayak and it has pre drilled holes made for store bought devises. But they are expensive and don’t line up anyway. Thanks so much. I love your videos.

[@FishinNStuff]

I appreciate you watching and thank you . Can you get a link to what your talking about so ill know what kind your looking at

[@briancsmith11]

www.cabelas.com/product/SCOTTY-SIDE-MOUNT-ROD-MASTER-II/3087750.uts Doesn’t have to be this one. Just one of holders you screw down down onto top of kayak. The base will stay screwed down permanently, but the rod holder can detach. It would nice if u could adjust it some for different angles etc.

[@StanleyOrchard]

Been waiting for the announcement on that giveaway! Hey another awesome video server love your work, you are absolutely killing it right now!

[@FishinNStuff]

Thank you Stanley. I just do the best I can brother . You ain't doing so bad yourself

[@eugenejohnson8635]

Good idea 💡

[@FishinNStuff]

Yes Sir thank you brother

[@rayharkey2495]

Just wondering the cost. An what info he would need on the Pro Tracker 195 team TXW

[@FishinNStuff]

I think he only does local work because he has to measure your boat .

[@chunkybuttz844]

I subscribed immediately upon reviewing the latest vids you’ve made. Thank ya Lord!

[@FishinNStuff]

I appreciate it

[@carriep7812]

I have a tracker pro 170 - could I get a quote on what a step for that would cost? It's a really common model boat and trailer.

[@FishinNStuff]

You'll have to call the Great Outdoors in Cherryville NC . I don't make em .

[@fishin-impossible2992]

Man them some Bad Azz steps.That dude Can Build. Can you get the brand name of the fluke with the Mohawk lol. Great video Keith thanks for sharing.

[@FishinNStuff]

Your correct he can build , ol and you know that was a artificial shrimp lure upside down haha 😄

[@randymiller3949]

Man...those steps look better than the steps you buy from Trick Step... Thanks for the video...I will be ordering some maybe by fall. I have a 2005 18ft G3 HP180 Aluminum Bass Boat with a completely removable tongue from the trailer that slides out of the trailer reciever...(not swing away) Would there be any problem shipping long distance to me here in Mobile Alabama? Much love from Mobile Alabama

[@joeross952]

Looks amazing. Just don’t know how it would hold up to salt water.

[@wadebass5600]

I live in florida and mostly saltwater fish. I need these steps for when I go out solo

[@FishinNStuff]

They are nice

[@niceguydmm]

Now that is what I need!!!

[@FishinNStuff]

Great Outdoors haha

[@niceguydmm]

@@FishinNStuff They right up the road!

[@FishinNStuff]

@@niceguydmm where you at

[@niceguydmm]

@@FishinNStuff Lincolnton NC 5 minutes from there. I sent you a message on Facebook.

[@FishinNStuff]

@@niceguydmm yep you right there

[@ramonedismuke9723]

How you doing. Just watch your video on the boat steps. I some for my Xpress pf stick steer boat. Can you help me. Let me know the price. Thank you

[@FishinNStuff]

They are custom . The prices vary depending on number of steps . You can call Great Outdoors in Cherryville NC . Like I said on the video

[@markpinther9296]

Any idea on costs? Just a range is fine. I am not holding anybody to numbers as it’s highly variable.

[@FishinNStuff]

I'm pretty sure they are 400 for the 3 stepper . But he only did it if he can measure your trailer .

[@georgestreeter3992]

I need one of those steps for my boat trailer? How much would it cost me for a Crestliner Super Hawk 1750 Aluminum Deep V??

[@FishinNStuff]

You have to call Great Outdoors and I think they only do local work

[@Retadin]

I really need these for my tracker grizzly 1860.

[@itowmyhome797]

Thank you

[@Mase357]

Did a search, can't find, I need these steps for my boat, the sooner the better. Need a website or number to order some.

[@FishinNStuff]

I'm not sure if they do shipping on the steps or not but here's the number 1 [phone]

[@callingallbassmorgan339]

I got a 14ft suncoast it’s a 1978. I’m interested for sure.!

[@gorp27]

This video gave me a bad case of band saw envy the way it cuts through steel, makes my cheap Harbor Freight one look like a Lego construction.

[@FishinNStuff]

Don't feel bad his tools are better than mine too lol

[@littlefishman6767]

Is your friend David still making trailer step? If so I have a Pioneer sportfish 197 center console on Magic tilt trailer I would like to know what it would cost for step and how to received them. I'm in New Orleans La. I didn't sent no pictures you can look it up on the internet, top of my boat to the tongue is about 40 inches.

[@FishinNStuff]

He only does steps if he can measure them . Because if something is measured wrong and they want their money back he gets stuck . And he does it on the side

[@ronnierigsbee8485]

I contacted Great outdoors in Cherryville NC about boat steps and they acted like they didn’t know what I was talking about . I want to get some steps built for a 96 Sprint Bass boat . Do you have a contact name ??

[@FishinNStuff]

You might have talked to the wrong person ask for one of the boat mechanics they know him . And ill warn ya in advance he will have to see your boat in person for measurements

[@DTEInc]

done!

[@cheetoz6902]

How do I get in touch with great outdoors about trailer steps . Very interested and they show no info on these

[@FishinNStuff]

The Great Outdoors.Cherrville NC

[@cheetoz6902]

I went to there website and no products of any kind .avail

[@FishinNStuff]

@@cheetoz6902 no Sir they don't sell em on the website, they are custom made by the guy on the video. You can call em and make an appointment to get your trailer measured.

[@19ADAM80]

Does he have a way to get measurements on a Tracker 175 Tournament Edition without me having to come up?

[@FishinNStuff]

I don't know , you void call em and ask

[@19ADAM80]

@@FishinNStuff 10-4

[@Dovetail-Artisan]

I have a Bass Tracker Pro 175 txw with the Tracker Trailstar trailer and want to hire him to make me a set, any chance he can make them for me? Very interested!! Thanks, Brian

[@19ADAM80]

@@Dovetail-Artisan I ended up getting a set from Boat Efx online.

[@BillSr.]

Where did you get the non slip surface material from?

[@FishinNStuff]

I'm not sure where he buys his but I know you can buy it on Amazon

[@johnwright9931]

Done

[@DoyenBlair]

How do I get in contact to price out some steps for my boat?

[@PKD253]

I just called the Great Outdoors and the lady who helped me said that he is a store friend and would take a message for me. Then said she will transfer me to the boat dept but no one picked up. Was on hold for over 10 minutes. I'll try again another day.

[@toddcarpenter714]

What part of N.C. are you from? I’m in Shelby, and I recently discovered your channel. Love it! When I saw Great outdoors in Cherryville, I was wondering if you were that close to me? Keep the DIY coming, I love some of the ideas!

[@FishinNStuff]

Yep I'm near Cherryville and kings mnt

[@toddcarpenter714]

Awesome! Good to meet a neighbor.

[@FishinNStuff]

@@toddcarpenter714 you too buddy