How to Build Keter Store It Out Max | Step by Step Assembly Video

[@maritae4814]

I've just assembled this myself (57 year old female) and it took around 3 hours single handedly. The video helped enormously but like others have said, pre-drilling holes helps.

[@WholeFoodPlantPeople]

thanks! Your comment helps me to feel more confident to go install this by myself for our renters.

[@JohnJones-g3r]

Thanks for that mines just been delivered i dont want it now 😂😂😂 thought it would just click in place as its for outside lol😊

[@weazel583]

Same lol nightmare

[@JohnJones-g3r]

@@weazel583 wasnt that bad just i xidnt use a drill had do it manually lol

[@nailakhan9210]

Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?

[@LiamAaronGillan]

I've just assembled this on my own, at 21:00pm at night in the dark and this video was perfect. Thank you most kindly

[@keteruk8879]

That's great to hear, well done!

[@MTBwayneMTB]

that's what we did except we stopped halfway because of the noise XD did not want to piss the neighbours off!! XD

[@nailakhan9210]

Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?

[@nivea123]

I've just assembled this myself on the Moon, because of the non gravitational forces it was really tricky, but after watching this video, it helped!

[@Cmiller85]

Built today with my wife. We made two in around 3hrs. I am also a practical as a chocolate fireguard. Nowhere near as bad as some of the comments here. The hardest part we found was the metal rod. Power drill made it 50x easier.

[@YEWGYZE]

Thank you for this upload , so much better seeing it done than reading instructions .

[@ront9395]

I just put together this shed. When you’re screwing in the back the tabs aren’t long enough and the screw hits the edge. Slant the screw to the outside for a more secure attachment. The hinge base is not like in the video. The strut is in between the screw holes. The plastic is pretty brittle and thin.

[@deryckthake]

This was very helpful, thank you. Pre-drilling pilot holes is a good idea. It is possible for 1 person using a manual screwdriver to assemble this (I did) but 2 people + a cordless screwdriver would certainly help. Fitting the back of the box is certainly the hardest part. I have to ask, why does one arrow on the inside of the back piece point down whilst the arrow on the outside of it point up?

[@JohnJones-g3r]

@@deryckthake yeah friggen blisters ya hands though i done mine with screwy tooo

[@andrewmcelroy9507]

I purchased a mini cordless drill from B&M which was useless so I had to resort to a manual screwdriver and have a massive blister on the palm of my hand. Some screws were very difficult to get flush, the three screws on the lower bolt on the door just would not insert fully. Took about 4hrs but that was unboxing and watching and rewatching videos on its construction at every step. Looks good now its finished and happy with the storage shed but not a task I want to try again without a proper drill.

[@TheKayakCrew]

I got as far as putting the rear panels in but it seems that without an electric drill/driver, you cannot screw up on. There seem to be holes to on the rear panel to screw the screws into.

[@AZ-hi2mg]

Also I was not going to install this beside a wall but as a freestanding shed. Anything I can do to make sure it does not blow over in a storm

[@scotty6847]

Great video was up in 20 mins with my impact driver 👏🏻

[@bikeman3103]

I also find the top metal bar is too long when install few months ago. I forgot how to fix as I have a metal saw for the blinds installation before. Other video told two persons to put it together r drill holes on them, maybe me too.

[@CeliaMadeley]

Thank you for this really useful video, it made putting the storage box together much easier.

[@MTBwayneMTB]

This video was a HUGE help because my max it out did not come with any instructions! thanks

[@andrewmcelroy9507]

You could have downloaded the instructions from Keter. I purchased mine from Argos and they had the instructions to download via PDF.

[@breakawayfromme]

Thanks for this, manged to set it up on my own

[@keteruk8879]

Great to hear!

[@torquesporttv9078]

How did you set it up on your own if you watches this video? Lol only joking

[@mattmahoney4597]

My lid keeps popping off at the back on the right hand side. I continually have to put it back in place. I have loosened the metal lid supports but it still happens and is not currently fit for purpose. Any ideas on how to remedy this?

[@Electrowave]

Thank you so much for this video. I didn't have instructions but managed to work out everything apart from the rear, it just wouldn't go together. I didn't know the metal bit had to be removed! Only one mild criticism; You don't clearly show which way around the metal bit goes. It isn't difficult for me to work out but some people may struggle for a bit if they have it the wrong way around. I managed to bend a hinge that was lining up properly. May have weakened the metal because it doesn't close flush, so I hope spare parts are available? My eighty year old dad also bought one of these, and managed to assemble it by himself! Shows how simple it is with instructions. I do have thirteen screws left over... Can't see where they go.

[@keteruk8879]

Thanks for your feedback. Glad you found it useful. If you find you need any spare parts, you can contact our team on [e-mail]

[@Electrowave]

@@keteruk8879 thank you :-)

[@helenkilbane9882]

Great video we did it in about 2.5hrs as started wrong then found the video very easy to follow thanks

[@nailakhan9210]

Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?

[@Roxxles]

Are these easy to disassemble with the clicking parts?

[@ultrawidegameplayandbenchm9158]

Purchased one and it arrived today and the hinge on the right door was completely snapped off not very happy tbh hopefully they will send me a replacement right door

[@keteruk8879]

You also have the option to return the item to your retailer for a replacement if you'd prefer. We are currently experiencing some delays with replacement parts for the Store It Out Max but the team will get one out to you as soon as they can.

[@ultrawidegameplayandbenchm9158]

@@keteruk8879 no point returning the full thing when it's just a replacement door sent you guys an email last night but haven't had a reply yet

[@angusmacdonald8817]

I can assure you the screws don't go in that easy. Everyone was a struggle but it's finally up.

[@keteruk8879]

Glad you've assembled it. Sometimes it helps to pre drill the pilot holes to help the screws go in more easily.

[@donkeymagick]

I wish Keter would pre-drill the pilot holes... 🤦🏻‍♂️

[@simonwalker1833]

@@donkeymagick I've just tried to assemble this item and hit this problem. It would have been very helpful if Keter had predrilled these holes since doing it yourself risks out of alignment etc if you get it wrong. very disappointed in the quality of the instructions here - they could have added that step in the paper instructions or the video.

[@TheKayakCrew]

Is it best to put down pavers as a base or can you just have level gravel as a base?

[@stuartprice6484]

Super easy and the kit is as described in this video. Well done Keter, I would by your products over others if this is the norm.

[@BryonyHancocks]

I brought this it came today was a nightmare putting together nothing fits properly and massive gaps everywhere definitely not fit for what I needed to store when it rains

[@simonwalker1833]

Been trying to put this item together for most of the morning. Very little progress not helped by fairly unclear instructions. Big question. Is the metal bar at the top of the back panel supposed to be wider than the back panel? Some people have commented below but without any clear answer. Are you supposed to fit it even though it's wider? I rang their 'helpline' which was pretty useless TBH.

[@TomDavias]

I'm interested in getting one of these but not for dust bins, can a bicycle fit in it?

[@tpmbe]

Good video, the written instructions were a bit vague for joining of the rear panel and very easy to mis-assemble it, the up -down arrows on the back panel are also confusing. There should be proper pilot holes as well, as it is difficult to screw in the self tappers.... Many Thanks

[@nailakhan9210]

Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?

[@joyoffilming9500]

Worked perfectly!

[@ldjw]

I personally found the second stage of putting together the two big black panels the hardest… and it’s not very clear and quite confusing! However love this video, very calming and great music! Not to mention the acting

[@keteruk8879]

Thanks for your feedback, we're glad the video was helpful for you.

[@TheRuthie30]

I am currently stuck on this step and about to give up. It’s not clear at all and I have arthritis and really struggling as to what to do

[@nailakhan9210]

Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?

[@24.7sunshine]

Thank you it's really helpful. Lol I got my wife to help after I showed her this video,I said you need a women to help like in the clip❤

[@sharonappleton22]

Why is this still being sold with the metal bar too long?! 😠 Can't build it, and now i can't take the sides off to send back! 🙄

[@garytube101]

Thats what i have just found. Metal bar too long....

[@kat1722]

Anyone else's not match up with what they got in the box? Mine completely different?

[@RMillan7]

Aighhhtt I’m about to put 3 of these suckers all by myself. Thanks for the video

[@keteruk8879]

Glad it helped, hope you got all 3 sorted.

[@RMillan7]

@@keteruk8879 yes, very easy!!! Took about 30 mins+ each for me

[@simonish68]

Is the store it out max ventilated, concerned about condensation. Also would I fit a 20” wheeled folding bike in there?

[@charlie9188]

I’ve put the door on the wrong way in my box can I I clip the hinge piece ? I’ve tried so hard to pull it out but it won’t come out

[@zoyahassan8142]

What did you do to fix it please? Been in same position and would appreciate help

[@charuzu2chubby759]

Did you find a solution?

[@maighreadstuart4161]

How many boxes is it delivered in

[@lonewong4241]

May I know how to disassemble the keter?

[@glennrandle8]

I've pushed the hinge in and door come off and so now I can't get hinge out to put door back on? Any help of how to remove hinge as it seems fixed now?

[@garytube101]

The metal support bar is too long (wider than the back panel by 10mm). Can you send me one that fits? Thanks

[@AOTAOE]

Can you secure it to the concrete pad so it doesn’t blow away?

[@knockshinnoch1950]

Yes- it can be secured. There are holes located on the base that can be used to secure the unit although fittings are not included.

[@ronvass7960]

I get the feeling this box is not meant to ever be disassembled? We need to move the box but transporting it through the house is not possible so we need to partially disassemble it 😱. Has anyone done this?

[@youngviking5931]

Thank you for a video very helpful 😅

[@Dr1zzGaming]

This video is a huge help! Thank you

[@keteruk8879]

That's great to hear!

[@timeforwar4841]

Great Job - well done, made it very easy. Can't believe I am a doppelganger for the guy.

[@keteruk8879]

Glad it helped!

[@mikekaluznyj1792]

Please could you do the same video but for the Store It Out Ace?

[@tartanarab9666]

Do you drill this to ground?

[@honeyg1018]

Do you need to put it on the patio pavers or can you put it on gravel?

[@MrDangerhere]

Can it stay still in windy conditions?

[@camper234]

With some heavy ish stuff in it won't blow away.

[@knockshinnoch1950]

I've encountered a big problem- when clicking the door into place the bottom jumped off the peg. I'm now trying to remove the clicked in fitting without breaking it so I complete the construction of the box. Any one with a solution? Help!

[@conorcallanan3255]

I’m having this same issue now. Did you solve it?

[@knockshinnoch1950]

Unfortunately no, no one has got back to me either with any advice. I'm not a happy customer! @@conorcallanan3255

[@mainchannelofarondomguy]

This was very helpful thanks 😃

[@danyaalhussain2999]

I have assembled this box till you add the doors in. I have put the small plastic fitting in the side panel without adding the door in. How would I removed this?

[@daniellasry2902]

Ive got the same issue. Did u sort ut?

[@shahrier90]

Does anyone know how to UNASSEMBLE it. Im moving and struggling to take off the side panels

[@calummacdonald9938]

Did you work out how to? I’m struggling to do mine as I type

[@1987kahil]

Can I get a washing machine and dryer next to each other? Is it large enough?

[@keteruk8879]

The Store It Out Max is designed for storage purposes only and not to house electrical items so we wouldn't recommend storing a washing machine and dryer in here. For information, the internal size is H 110 x W 132 x D 76cm.

[@mrmethane10]

I wish I had seen this video before attempting to put ours together. One of the doors ended up on the wrong side and now I can't get it off again. Any ideas for its' easy removal please?

[@Krypto7424]

Hammer

[@SugraBeghum]

Wrench

[@SugraBeghum]

Bunsen burner

[@conorcallanan3255]

Did you manage to solve it. I made the same errror

[@samhill5231]

The only minor issue I/we encountered was that I didn't realize one of the two back panels has to be turned around in order to allow both panels to interlock and be a large flat back panel before screwing them together. All in all it was about a 2 1/2 hr. job for the two of us, a cordless drill driver and laptop to follow this video while assembling.

[@bennyt4903]

I’ve put the doors on the wrong way lol. Anyway to take them off?

[@keteruk8879]

You would need to unattach the hinge at the top by pulling this out of the side panel. These click into place so you may need to use a flat sided tool to help bring them out gently.

[@twogamers6851]

did you managed to get them off because i put the clips in first and can’t fit them on?

[@KJ-yz8rl]

@@twogamers6851 I managed to do the same and was unable to get them off

[@KJ-yz8rl]

@@keteruk8879 hi, is there any instructions how to dismantle?

[@bennyt4903]

@@twogamers6851 yes with sheer muscle lol sorry for late repky but did take 2 people

[@KD-pl2ys]

Thank you

[@obiektywny_turysta]

You change the patern of this one? My don't have the same back walls for example. I don't have instruction manual ether in the cartoon.

[@julierhodes2211]

just about to assembly and the (no 2) wlpm x 2 plus the 5 screws the WLpm where the screws go the holes are their but the plastic covers the hole as well, are you supposed to drill through them ????

[@keteruk8879]

Are you referring to the Store It Out Max? Generally there are pilot holes where the screws are meant to go, so it's easy to drill them in.

[@MRJBS117]

Dude mine doesn’t have them brackets for the doors…..

[@JulieTasker]

Many thanks 🙏💕

[@hemtet5500]

Can you unclick the sides for disassembly if needed thanks

[@SugraBeghum]

I assembled this in my living room, everything disassembled except from the sides lmfao now its stuck

[@hemtet5500]

@@SugraBeghum this is a real concern as I can buy a second hand one that’s already assembled but can I take it apart to load into my suv there seems to be a problem doing this?

[@SugraBeghum]

@hemtet5500 u can take everything apart easily except, the two walls on the sides that are securely clipped into the base or floor of shed, I barely got that shed out into my garden from living room even with the two walls clipped on, I was even thinking about sewing it in half and gluing it back together lmafooo

[@SugraBeghum]

@@hemtet5500 how big is ur suv? Model?

[@hemtet5500]

@@SugraBeghum cr-v mk2 Honda

[@Sitwe1978]

wow...this made the assembly so easy...

[@keteruk8879]

Great to hear, thanks for your feedback.

[@jbug884]

I wish I watched this first! Messed up the door hinges! 🤦‍♀️🤣

[@nicolaredway4343]

Can someone please tell me what screws these are please?

[@spudgun889]

Who didn’t take the bar out first 😂 Me

[@phillayden9462]

hey i stupidly put the door hinges in before attaching them to the door. tried to take them out but cant seem to do it. broke one in the process. any tips on getting them out?

[@keteruk8879]

To remove the hinges, you'd have to gently prise them out with a flat sided tool.

[@jonflowers1370]

@@keteruk8879Good luck with that…my elderly dad has just done the same thing, bless him. He was trying to be helpful while I was still attaching the bolts etc to the doors. They are impossible to get out and now he’s depressed because he feels he’s wasted the best part of 200 quid on a storage unit with just one door. (Luckily I stopped him after he’d put the left hinge in.) Either the hinge, or the hole where you insert the hinge should have some sort of warning label on it to stop people doing this as looking online, it seems to be a fairly common occurrence. 😊😡

[@ginad8238]

Nice music 👍🏽

[@shane8644]

You do need to do pilot holes and then it's piece of cake

[@MrBook123456]

looking good

[@keteruk8879]

Thank you for your comment.

[@vyrodwarvenking]

I don’t get it. The pistons I got are different than the ones that are supposedly supplied. Don’t line up the same either..

[@keteruk8879]

Thanks for the feedback. If you're having issues with your assembly or need replacement parts, you can get in touch with our team on [e-mail]

[@jaromerock5430]

Is it possible to disassemble again once put together?

[@kml482]

Nope!

[@rickmartindale8443]

i did

[@sharonappleton22]

How?! ​@@rickmartindale8443

[@melnelson688]

What is the inside width in inches ????

[@Kinggoodway]

How to remove sides from basr

[@TDW1788]

What model is this please?

[@patriciacauser3475]

has anyone tried to dismantle this shed to move.

[@bobwebster6925]

2 boxes broken gonna try & make 1 box 👍here goes,know how but from a wheelchair hmmmm

[@claudiagilhespy5180]

Help…. I mess up with the doors!!!!! I clicked up & the bottom it wasn’t in ….. please help what can I do to unclicked?????

[@keteruk8879]

Hello, you can gently prise the part you clicked in with a flat sided tool. This should enable you to reassemble the doors correctly.

[@claudiagilhespy5180]

@@keteruk8879 thanks sort it!!!!!! 👍

[@narmmm]

@@claudiagilhespy5180 hi did you manage to get it out? im struggling :(

[@claudiagilhespy5180]

YES 👍 👍👍

[@claudiagilhespy5180]

@@narmmm Yes … thanks for the video 👍

[@petalspemberley5300]

Hi! I’ve emailed y’all because Argos sent me this and the wrong back pieces came with it and I was hoping y’all could send me the right pieces because Argos doesn’t have any replacements! In the meantime I’m trying to disassemble what I already did but I’m really struggling to get the side walls out of the floor. I see the two clips at the front edge which I can just about push in but it still won’t come out. What am I missing? Thanks!

[@keteruk8879]

Hello, to remove the walls from the floor, we'd suggest using a flat sided tool to gently prise out the sides.

[@AZ-hi2mg]

Ok I own this kit and it does not Look easy at all

[@emilianolus9215]

If I put wooden shelves on it, how many pounds or kilos can it support?

[@nigeldavies4572]

Use a small drill bit to pre drill holes, especially for the back. It somewhat boggles my mind they didn't do this for you for the back of the unit. Rather lazy manufacturing and makes it a two person job UNLESS you pre-drill the holes OR manually do the screws, which is hard work. Imagine if IKEA did that? What should be a simple assembly made 10 times harder by this omission. Was a PITA quite frankly.

[@youngforever9231]

Just one mistake n I am ruined I clicked in the door hinge in first now don't know what to do

[@figueredoruley8050]

I did it with the Woodglut plans.

[@ThePlapla01]

It s bad quality product for quality an overpriced good. The video looks like it s easy to set this up while it s rather complex due to the average plastic quality

[@gman5375]

Your products are terrible quality. The plastic panels come warped and the “click together” joints have plastic left in the holes where the moulding process has not worked properly. Have exchanged item and same problem. Quick google search shows this is very common with Keter.

[@keteruk8879]

Sorry to hear about this, it's not the quality we would expect. Please contact our customer services team so they can look into this for you. The email is [e-mail]

[@rfurdaylee]

No need for the darned music. A talk through would be much more useful.

[@Murphy94x]

Every screw becomes harder to install than the previous screw. Pilot holes or no pilot holes, the screws going in is an absolute joke. Just don’t budge whatsoever

[@keteruk8879]

Sorry to hear you're struggling with this. It can help to pre-drill the pilot holes before adding in the screws.

[@Murphy94x]

@@keteruk8879 I did drill pilot holes! Just seemed to get tighter and tighter! I managed in the end and it’s a great bit of kit! Thank you!

[@chrisdyson4996]

pile of rubbish i did all the steps and there was m massive gap in the lid the metal bar that was supplied was way to long also for some reason

[@keteruk8879]

Thanks for the feedback. If you're having issues with your assembly or need replacement parts, you can get in touch with our team on [e-mail]

[@zeekhavanna1849]

Plastic junk