Assembling a Keter Store It Out Max 1200L Storage Shed

[@PhillWyattProjects]

Amazon UK Link to Keter Store It Out Max Storage Shed : amzn.to/3ROllwn * As an Amazon Associate I earn from qualifying purchases. Thank you.

[@barbarahoulihan6869]

Hi Phil, just want to say a huge thank you for your wonderful video! I’m a 62 year old woman and after watching your video I was able to put my 1200L Keter storage shed together on MY OWN!! 😂 Took me a lot longer than you as I had to keep going back over your video. So thank you so much and keep up your good work. Xxx 🥰

[@PhillWyattProjects]

That's brilliant Barbara! As long as it's up within a day I think that's a good result. Thanks for the lovely comment. 👍🏻

[@barbarahoulihan6869]

@@PhillWyattProjects I had it all finished in a few hours! I’ll be watching out for your videos now. Well done you!Thanks again. 🥰🥰

[@ladystardust1670]

Im 63 and was wondering if I could do it myself without the fuss of arranging help. Confident now Ive watched this👍❤️👍

[@Wobb71]

Great job my friend

[@PhillWyattProjects]

Thank you! Cheers!

[@dushkaahmad1248]

Hi Phill, thousand thanks for your video. I am also a 62 year old woman who managed to assemble this by following your video. It wouldn’t have been possible without your great instructions. I tried doing it without an electric drill but realized very quickly that it wouldn’t be possible 😂. Ordered a cheap one from Amazon which did the job. Once again thank you and lots of blessings. You’re a star 🎉.

[@PhillWyattProjects]

Thank you very much for the lovely comment I really appreciate it. Glad to be of help! 👍🏻

[@MrSychnant]

I bought this years ago and never assembled it,the instructions got eaten by mice so your video was a godsend,especially when fitting the back. Thanks a lot. 😅

[@PhillWyattProjects]

Haha I'm glad you found it useful!

[@davidliddell5613]

Thank you Phil, Great and easy to follow instructions on building the Keter Storage unit. You have now convinced me to buy one mate. Thanks again

[@PhillWyattProjects]

Your welcome David. I like mine they are good as long as you look after them. Don't leave the doors or roof open on a windy day. Open doors carefully that sort of thing.

[@AnneParry-r6r]

Thanks Phil for your comprehensive instructions and easy to follow video. I put mine together without a problem in around an hour or so, having watched it twice. I did go back to review each section before completing them but it was pretty straightforward and I did it by myself. If I had followed Keter’s instructions I probably wouldn’t have tackled it as it said a two person job. Fantastic instructions!

[@PhillWyattProjects]

Glad it helped! Thanks!

[@lornacarter849]

HI Phil I too am and 'Older lady) 71 tomorrow in fact. Yours was by far the most clear of the tutorials, as you actually take the time to show the individual pieces being put in place AND you don't loud music, assuming people know what to do - just by looking at the pictures. I did find that the back panel top outer screws would not go in - will have to wait for my son to come over to use his larger drill/driver I think. Thank you!

[@PhillWyattProjects]

Thanks you for the encouraging comment and happy birthday! 🎂. Some stages of the assembly require a bit of persuasion to get everything lined up and in place.

[@LenkaCorrigan]

Thank you so much for your video! So glad I watched it before we're going to assemble the keter storage shed. I'm sure I'll be watching more of your videos as we go about getting our garden in order. Thank you!

[@PhillWyattProjects]

Thanks! Your welcome 👍🏻

[@faebrowne2537]

I had two of these for years. Bone dry and spider free. That was until my son’s mate came barrelling down the garden on a new bike and smashed into it splitting the side🫣. But nevertheless, great shed and an absolute godsend in a garden as small as mine. Another great video from this channel 👍

[@PhillWyattProjects]

Thank you 👍🏻 yea I agree they are good as long as they are looked after they do a good job keeping everything dry.

[@CaroleFrenchFox]

Glad you mentioned Spider free. Have just ordered one to store my push bike and dreading garden tarantulas moving in too. 😬

[@majesticallymade6177]

Thanks Phil for this clear, no fuzz, no crazy music to th point video much appreciated as I'm looking t purchase very soon 🎯

[@PhillWyattProjects]

Your welcome 👍🏻

[@Munirs1998]

Thank you so much for your how to video. Helped me to get the assembly quickly done and understand how some fit together! Good video and thumbs up from me!

[@PhillWyattProjects]

Thank you 👍🏻

[@davecass9486]

Hi Phill, had one of these sheds for three years now following separation and moving ! its amazing how much you can get in one, i had, lawn mower, pressure washer, strimmer, telescopic ladder, bistro table and chairs, etc. in the wettest and sunniest spot in the garden. never a drop of water got in...............so, i recently put up ketter factor 8"x11" shed (£850 for 4" in concrete base) but no regrets. spent extra £70 on roof verges, angle bead and CT1 sealant, screwed and glued for peace of mind living close to the sussex downs. and got another ketter baby shed to match the other one and keep big shed a bit clearer for my bike. (next chapter !) thanks for post, putting up toms.

[@PhillWyattProjects]

Hi Dave I agree you can get quite a bit in these and I've never experienced any leaking either. I put a shelf in mine which makes the space more useful. I also have the Darwin 6 x 4 which I am glad I bought. Never leaked. Doesn't rot. I like these types of sheds. I would get a bigger one although I've run out of garden space now.

[@yawnyawn56]

Thank you so much for this, I was very wary of buying it but you made it look easy👍

[@PhillWyattProjects]

@@yawnyawn56 no problem 👍🏻

[@bkji3058]

Thank you so much. It helped me to put my storage easily.

[@PhillWyattProjects]

Glad it helped!

[@riokewilliams955]

Thanks Phil, you're just too amazing. Your instruction was very clear and well understood. The instructions supplied in the box weren't easy to understand unless one knows what to do, but the way you explained your own is quite clear and easy to follow. Thanks for sharing the knowledge and much appreciated 👍

[@PhillWyattProjects]

You are very welcome. Thank you!

[@YellowRoses10]

Nice flowers and I put my storage unit similar to yours together today.

[@PhillWyattProjects]

Thanks! That's great 😃👍

[@abmac58]

Thank you so much for this video as the instructions are clear as mud that came with or unit many thanks keep up the good work 👍

[@PhillWyattProjects]

Thanks your welcome 👍🏻

[@karenlizzy65]

Thank you. It took two of us, and it was completed within 2 hours after watching your video, and it looks great 😂❤

[@PhillWyattProjects]

Excellent!

[@deanothemanc5281]

Good video this helped me a lot yesterday when i put it together. Especially the rear panel!!!

[@PhillWyattProjects]

Great to hear!

[@1956van]

Absolutely brilliant thank you...will be following your video tomorrow when I put this together

[@PhillWyattProjects]

Your welcome 👍🏻

[@brianludwig180]

Brilliant video - thank you so much - it has really helped me build my own one

[@PhillWyattProjects]

No problem 👍

[@dccrowley]

really appreciate this video. much better than the manual and completed in just over half an hour

[@PhillWyattProjects]

Your welcome Don and Thanks 👍🏻

[@MrAndri0d]

Mate, keter should pay you for this video, honestly it's 1000x better that what they've put up 😂

[@PhillWyattProjects]

Thanks 👍🏻 oh yea that would be great 😆

[@playerhaterseeyoulater]

Thanks for the instructions, this would have taken me an age without the video! Super helpful thank you

[@PhillWyattProjects]

Cheers your welcome 👍🏻

[@spent808]

Cheers Phill, really useful video. Thank you!

[@PhillWyattProjects]

Glad it was helpful!

[@DeanoEssex]

Thanks. I have just bought one but is there any way to fit a shed alarm? 🙂

[@PhillWyattProjects]

Your welcome. I'm not sure about fitting an alarm to be honest.

[@garywatkin1]

Thanks pal. Video helped me out of a tight spot when Keter hadn’t sent me the instructions.

[@PhillWyattProjects]

Your welcome 👍🏻

[@johnbeveridge2998]

Thanks Phil bought this in the summer but only just built it. your video was perfect and made the build stress free.

[@PhillWyattProjects]

Thanks John that's great to hear 👍😃

[@AnneHenry-c5b]

Followed your video and managed to build my shed 🙌 thanks for sharing 👍 🙏 😊

[@PhillWyattProjects]

Thanks your welcome 👍🏻

[@rafregt13]

Thanks for this...using your video I just built mine...really helpful

[@PhillWyattProjects]

Your welcome 👍🏻

[@DavidJones-lz4io]

I’ve just put my third one up and I still use this flipping video just to remind me how not to muck it up! Love yr channel Phill!!

[@PhillWyattProjects]

Thank you very much 👍🏻

[@mrbigdave666]

excellent video couldnt have been more clearer thank you so much BRILLIANT

[@PhillWyattProjects]

Thanks 👍🏻

[@TheKayakCrew]

Thanks for the video. At 3:30, when you screw the back panel in, I am having the problem that there are no guide holes in the back panel. Am I right in thinking therefore that I need to pre-drill holes in the back panel the screw through or if I used a electric driver, would this enable me to bore the screws through the back panel? Sry, I’m a bit of a muppet at diy.

[@andrewmcelroy9507]

Thanks for the video, took me about 4hrs constructing the storage shed as unfortunately my mini cordless drill from B&M was not up to the job so had to input the screws manually so now have a nasty blister on the palm of my hand, the screws were a lot harder in some places to get tightened, especially the bottom bolt in the door which required three screws, noticed you seemed to have difficulty with the drill also but overall I am very pleased with the result and it does look good just hope it is water-proof. The instructions that came with the product were rubbish so I was running back and forth into the house to watch each step by you. Have three screws over so hope I didn't miss anything and they are just surplus.

[@PhillWyattProjects]

Yea i ended up with a few spares at the end I think they give a few extra fixings. Mine is still doing good nice and watertight I haven't had any problems with it yet. One tip.....remember to pull up the lever lock at the bottom of the door before you pull the doors open. It could be easy to break the doors that way. I have forgotten myself a few times.

[@andrewmcelroy9507]

@@PhillWyattProjects I was watching you constructing the Keter 6x4 shed and wondering what drill you would recommend, looked like it was a Bosch you had. I was using a Black & Decker cordless drill and the B&M mini cordless drill and both were useless so have decided to get a proper drill that will input screws, I have my dads drill which is over 30 years old so have decided to purchase a proper cordless drill but so many on the market its hard to choose.

[@patricianaidoo22]

Hey Phill, thank you so much for this DIY video 🙏 Purchased this Keter shed over the weekend. It was easy to understand and assemble, esp for a female 😁needed some muscle for the screws but overall managed quite nicely. Def going to check out your video on how to build the shed base 👍great idea, neat and tidy.

[@PhillWyattProjects]

Thank you Patricia 🙂 glad you found the video useful 👍🏻

[@dassa440]

Got one of these though slightly different. Want to the it down to move. But can't unclipped the doors or the sides from the base. Any ideas ?

[@527colin]

Thanks this was helpful to someone who struggled with the paper instructions due to a medical problem 😀

[@PhillWyattProjects]

I'm glad you found it useful 👍🏻 cheers!

[@luciussander8217]

The metal bar on mine was too long and meant the rear wouldn't fit flush to the sides. I've since found out this is an issue many have found. I filed down one end and drilled a new hole, it then fitted perfectly. Not good they've knowingly got a product with a defect and haven't recalled them or offer customers a free replacement bar of the correct length.

[@PhillWyattProjects]

I have heard about this from another comment. Mine was fine although I see some have these problems.

[@carling5214]

Ours came today, exactly the same problem. Thought I was going nuts. I don't have anything to file it down with. B&Q have said the whole thing will need swapping. Pain.

[@sharonappleton22]

Got mine yesterday and my metal bar is too long! Why are they still being sent out?!

[@carling5214]

​@@sharonappleton22I managed to do mine without filing it, made sure the bar was dead centre then pushed the sides in as much as possible and drilled. It curves slightly out each side at the rear at the top at the back where screwed, but the unit has been solid and works fine. Ordered one for my mum from argos which I put together and that bar did the same, don't know why they can't have one the right width lol

[@tetleyandtoast]

I’m having the same issue, must be a bad batch from B&q

[@B3NZ3RK3R]

Looking to disassemble mine as I need to move it through my house to put in to my front garden but for the life of me I cant get the side pannels off do you know a way to take the side pannels off ?

[@HarryJVick]

This winter I have noticed condensation building up inside on the roof of mine. I'm guessing adding some ventilation holes might help this? Any tips?

[@PhillWyattProjects]

What are you storing in there? anything that contains any moisture? I have not experienced any condensation with mine and I haven't added any extra ventilation holes.

[@HarryJVick]

My particular model doesn't have any ventilation holes whatsoever so I wonder if this isn't helping. I just store garden tools, lawn mower etc in there, few planks of spare wood that kind of thing.

[@rehanmhatey1223]

Excellent video

[@PhillWyattProjects]

Cheers! 👍🏻

[@TimBlack-qq4ib]

any advice on how to dismantle one of these ?..... I've removed the roof and the back-panel,..... but cant seem to find a way to separate the sides and the doors, with their seemingly one-action snap mechanisms ?

[@ClutchBuster]

Hi Phil, a year later, how is it doing with the wind and rain? Also coudl it fit an adults bike and a few gardening tools? Cheers

[@PhillWyattProjects]

Hi, it's doing good just like when I first put it up. Haven't had any problems with it so far. Not sure if it's quite long enough for an adult bike. Would be tight I think.

[@ClutchBuster]

@@PhillWyattProjects cheers mate

[@ShaolinMumps]

Great video, do you think it would fit a flymo and small strimmer

[@PhillWyattProjects]

Yes, absolutely

[@ozzieblackcherry0707]

Thanks, can you fit a bicycle if you turn the handlebar to the side?

[@yakubalbert]

Very helpful Video Phill. I am planning to buy one :)

[@PhillWyattProjects]

Your welcome 👍🏻

[@photondebuger45]

I put that together today actually with the instructions n stuff its good a little to clever for its own good really but it goes together well. The screws got me like as in i wasn't expecting the mountain of them to use.

[@menze4]

Thanks for the video but the back panel is giving me trouble. Are they meant to slide into each other before screwing? Cause mine is not clamped together, they are some space when I screw both in and unable to slide the back into place 😢

[@shastflamearashi6428]

the gas cylinders on my second hand were working fine till last week. they now fail to support the lid if the 2 bin lids are attached. is this fixable or do i need to order new parts?

[@PhillWyattProjects]

Sorry to hear that. I am not sure how it can be fixed mine are fine at the moment. I would probably replace them as it might be more trouble than it's worth fixing them.

[@nicolabaxby4130]

Putting mine up over the next few days. Hoping it's as easy as you make it look 😊

[@PhillWyattProjects]

Have fun!

[@richardmetcalfe9423]

Great video, saved us ages. Cheers 😊

[@PhillWyattProjects]

Your welcome. Thanks.

[@kennydeary957]

Great video

[@PhillWyattProjects]

Cheers! 👍🏻

[@MartinoLeary-c5n]

Most helpful, thanks !

[@PhillWyattProjects]

Glad it was helpful!

[@peterleake892]

Are they easily disassembled if you move house?

[@PhillWyattProjects]

I'm out sure about this particular model as I haven't dismantled it yet. I dismantled a similar one in the past and it wasn't too bad.

[@nataliepeck77]

Hi Phil, Great video. Do you know what the depth of this storage shed is with the doors open? Many Thanks

[@mikeb3443]

Thanks Phil…..very useful. It takes longer than the 25 minutes the instructions state, took me about 1 hour 30 that’s with two of us doing it. Worth it though seems quite sturdy.

[@PhillWyattProjects]

Your welcome Mike. Yea mine is still as good as new. Works well for me.

[@horndoglip]

Hi I have the midi version in the uk. What are they like for melting in direct sunlight?

[@PhillWyattProjects]

I haven't experienced any melting. I've had 2 of these. Not had a problem putting them in direct sunlight.

[@horndoglip]

@@PhillWyattProjects Ok thanks for the reply, I’ll risk it outside. Was wondering if they may warp in the heat

[@raymondgilbert1168]

Nice one Phil ❤

[@PhillWyattProjects]

Your welcome.

[@Kinggoodway]

Best way to take off sides from the base?

[@PhillWyattProjects]

A few people have asked this although I'm not sure as I haven't had to dismantle this one yet.

[@GregoryKowalski_Emowedding]

how to dismantle the floor from side walls, any ideas?

[@GregoryKowalski_Emowedding]

@PhillWyattProjects

[@PhillWyattProjects]

I am not sure actually. Maybe someone in the comments might have a suggestion.

[@pamclarke4961]

Hi the back panels seem to overlap rather than slot together. Is that right?

[@PhillWyattProjects]

Yes they overlap slightly and the screws go through them to lock them in place.

[@pamclarke4961]

@@PhillWyattProjects thanks

[@joandavies8495]

Hi I'm dismantle the box how do you get the sides off again many thanks

[@PhillWyattProjects]

I'm not sure to be honest I did take one apart years ago so I know it's possible but I can't remember how I did it.

[@tomkennedy2908]

my holes are not lining with enthing on the back ?

[@glennrandle8]

Any idea of how to get the hinge out? Basically had a mare with the door as I went to clip it in the hinge went in but the door came off hinge so now I can't get it back on without taking hinge out but it seems impossible ??

[@PhillWyattProjects]

Hi, Sorry I am not sure if there is a simple way. I did pop one out a while ago when dismantling one of these kinds of sheds but if I remember I had to be firm with it and use some force although I can't explain exactly how I did it.

[@PATLIGHT1000]

After watching this I never even look at the instructions. Thank you.

[@PhillWyattProjects]

Thanks your welcome 👍🏻

[@damiensings9864]

I'm dismantling and can't get the side's off. Any help appreciated 😊

[@Kratos-wc2st]

Instructions pretty easy but im struggling with the 2 black back boards that join together. After seeing some faults im starting to think i have 2 of the same pieces. 🤦‍♂️

[@TheTiggsy79]

Hi, I just opened mine up but couldnt find the accessories pack. Screws etc. Where should these be if not in the plastic as in the vid?

[@PhillWyattProjects]

Mine came just how you see it in the video. It's possible that yours might be missing. They should be quite easy to find in the packaging.

[@mandyburgess1674]

Are these easy to dismantle ?we want to move ours to a different part of the garden

[@PhillWyattProjects]

They are not too bad I've done one before just be careful not to snap a y of the plastic clips.

[@ishtiaqrazamushtaq6363]

Hi. Quick question. Do you have to have a base for the box or can it go straight in to concrete slabs? Thanks.

[@PhillWyattProjects]

I made a wooden base for it although you can put it on a concrete base just needs to be level.

[@hemtet5500]

Hi thanks for posting this video and can I ask you as I’m about to buy a second hand one but it is already assembled do you think it’s possible to take one of these apart? Thanks again

[@PhillWyattProjects]

Hi, yea I'm sure it is possible as I bought one used myself once and it was dismantled so I could get it in the car. I then put it back together.

[@hemtet5500]

@@PhillWyattProjects did you dismantle it? Thanks

[@richardlafferty4985]

Hi Phil, any advice on how best to remove one of the door hinges? I stupidly pushed in WLBL(top door hinge) and no idea how to get it out to attach the door!

[@PhillWyattProjects]

Hi Richard, I'm sorry but I am not sure. I did dismantle one of these a while ago and put it back up again. I was just careful and used a flat headed screw driver the push the plastic down to release it. There is no exact way to do it you just need to do it patiently. Hope this helps.

[@Paul-jo7gw]

Hi, stupidly I put the hinges for the doors on first. How do I remedy this?

[@PhillWyattProjects]

I am not sure how to rectify that. Maybe someone in the comments will have a solution.

[@philforest4747]

Brilliant video. Thank you

[@PhillWyattProjects]

No problem 👍🏻

[@nelftm]

I've just bought 2 of these on an offer. Would you say there would be any benefit in gluing some or all of the parts together for extra strength?

[@PhillWyattProjects]

That's a good question. I would say probably not I don't think it would make much difference though I could be wrong about that.

[@rozied2415]

Thank you so very much it's my intention to purchase tomorrow at Argos💙🙏🏽

[@PhillWyattProjects]

You are so welcome

[@paul24w]

Cheers Phill great video and much easier to understand than the instructions that come with it

[@PhillWyattProjects]

No problem. Happy to help 👍

[@nobodyimportant650]

One thing I noticed when assembling, even though the rear metal support bar is as high up on the back as I can get it to go, with the lid closed I have about 1/4 inch gap between that metal strip and the lid. Lid is attached as per instructions, so not sure why I have this gap? I'm predicting blowing rain may work its away inside

[@paulsonedamana3183]

I have the same problem, how did you fix it mate ?

[@knockshinnoch1950]

Great video- really useful. I have a problem though! When fitting the doors one of the spindles "jumped" (see 9.41 IN YOUR VIDEO- the bottom pin came out when I clicked the top part in) and now I can't get the click in door fitting back out to re-install the door. Any suggestions?

[@benwoods7399]

This happened to me too just now! Any suggestions welcome! Thanks

[@knockshinnoch1950]

@@benwoods7399 I still haven't managed to fix it!

[@arsechedder]

Any videos on how to take one apart. (Moving house)

[@PhillWyattProjects]

That would be a good video although I don't plan on taking this one apart for a while so cant help just now sorry

[@giulianatiripelli2308]

very useful, thank you! we had no issue other than we inserter the upper lock of one door all the way in to the click before inserting the door in the lower hole (our mistake), so we had to find an alternative solution, but all came out very well anyway.

[@PhillWyattProjects]

Glad you found the video useful! Thanks 👍🏻

[@benwoods7399]

What did ye do for an alternative solution? I did the same and the bottom pin came clean off too. 😪

[@Detectorist123]

hello mate, i have just purchased this KETER XL storage, box, & your video came in very useful, so a big thanks, plus i have just subscribed to your channel, all the best, 🤝👍

[@PhillWyattProjects]

Thank you very much 👍 great stuff 😃

[@andrewmorris2996]

Any videos on dismantling them?

[@PhillWyattProjects]

Sorry I've not had to dismantle this shed yet so I can't advise at the moment 👍🏻

[@andrewmorris2996]

@@PhillWyattProjects I've just done it. Not easy and clearly not really designed to be moved once in place

[@krishajeyasiri7325]

Hi Made. Mistake on the door panel, Ii inserted the door plug at the shed with out doing the door hook, How do I correct it. The plug won’t come out form the shed panels

[@ig8411]

Same happened to me 😢

[@simonwalker1833]

I've been trying to assemble this but have hit the same issue many have commented. The metal bar at the top is wider than the back panel. It seems this is a fault with this product. So whilst some have said they've fudged it, I'm not sure if that would make the top not fit? I'm wondering whether to cut the bar to length. Trouble is it isn't a simple cut one end; both ends will need cutting to be equal. Very frustrating.

[@PhillWyattProjects]

@@simonwalker1833 I'm not sure what to suggest apart from ask them to send a replacement part. I don't think mine had that problem. The companies you buy sheds from usually have a stock of parts for replacement.

[@JohnGrantham-r8d]

Phil. I've made a big mistake by adding the small pieces into the frame before putting them on the door do now cannot put doors on. Help. Please

[@PhillWyattProjects]

I'm not sure to be honest with you. You might need to be brave and use a bit of brute force to pop it back out although try to be careful as not to break something.

[@ormovilla82]

I did the same thing at the weekend and with brute force and getting my angles right I got them in !

[@DarkAmbientEscapes]

Does it leak water inside? or do you find tons of webs/creepy crawlies in there when you open it?

[@PhillWyattProjects]

Mine does not leak water. And I haven't seen webs or spiders in it yet either.

[@AmbientDreamEscapes]

@@PhillWyattProjects thank you 😀💕

[@helengreenland5737]

I have just build this and accidentally put the doors on upside down. How do I dismantle them?

[@PhillWyattProjects]

Hopefully someone in the comments might be able to help. I am not sure to be honest.

[@antoniotirado7473]

Were can i Buy brakets for my shelter 6 x 3 keter ?????

[@carolt7872]

Thanks Phill. I just put together the smaller Midi one. Took me 45min without a power drill so I'm waiting to borrow one cause I'm sure they could use tightening but my instructions said nothing about that hole towards the bottom and I was wondering what it was there for and thankfully you solved my mystery so thank you very much! I'm just curious I just put it on the concrete do I need a base? It seems level.

[@PhillWyattProjects]

Thanks Carol. If the concrete is level then it should be just fine like that.

[@J99957]

Can you take the doors off if you got this part wrong

[@PhillWyattProjects]

I think there is probably a way although I'm not sure how.

[@user-zw9go3gm9z]

Lid has broken due to a mishap, new lid delivered but do i need new screws or can I take the old lid off and use all the bits attaching it to the box

[@PhillWyattProjects]

As long as the screws are undamaged then they should be fine in my opinion. Check that the lifters are not bent.

[@user-zw9go3gm9z]

@@PhillWyattProjects Ok thank you. I dont know what the lifters are but hopefully whoever I ask to refit will know

[@user-zw9go3gm9z]

@@PhillWyattProjects thanks for your help all done now

[@tonyjessop5061]

Hi Phill do you do a demonstrayion on how to dismantle the shed safely Regards Tony

[@PhillWyattProjects]

Sory Tony so far I haven't needed to dismantle it. When I do at some point I could do a vid but it won't be in the near future I'm afraid 👍

[@peteg5389]

Hi Phil - built mine straight after watching your video, and on the whole it was pretty straightforward - only issue I had was fitting the metal brace bar to the top of the back wall and am wondering if I’ve made an error or had a faulty part. Having done my research before buying this shed it seems a lot of people have had the same issue, so I’m clearly not alone. When the bar is put in place and having aligned the holes in the top left corner and screwed it in, I found that the bar over hung the top right corner of the back wall so that when the bar hole is lined up with the hole in the back of the right wall it pushes the right wall out ie it won’t align properly / stay flush. Only solution was to cut c.5mm off the bar and drill a new hole in the bar. Not a major issue but odd that holes won’t align otherwise? Any thoughts as it seems you didn’t have this issue?

[@PhillWyattProjects]

Hi Pete, I don't remember having this problem. I remember it being a bit fiddly to line up but it worked out fine. Sorry I can't give my thoughts.

[@pmyzjc]

I’m having exactly the same problem.

[@peteg5389]

@@pmyzjc which either means there’s a batch of faulty parts or the instructions are inadequate - I wonder if anyone has raised it with Keter direct?

[@pmyzjc]

@@peteg5389 I’m going to take this up with Keter and see if they’ll send me a new one. Unless you’re up for popping round and cutting mine down too? I don’t have the tools or the skill to do it myself!

[@peteg5389]

@@pmyzjc alas I suspect I’m miles away but do post an update and let us know what Keter say - good luck!

[@jeng7403]

Thank you for this! 😊

[@PhillWyattProjects]

Your welcome 👍🏻

[@nicolaredway4343]

Can someone please tell me what screws these are please????

[@PhillWyattProjects]

What do you mean? All the screws come with the product in a bag.

[@xxLisaJaynexx]

I’m giving this a go today. I’ve done flat pack furniture but never anything like this so please wish me luck - I’m. Gonna need it lol who says I need a man?! Me today! lol x

[@PhillWyattProjects]

Good luck 🤞🏻 it's not to bad on a good day.

[@Ineedahandle75]

Will a bike fit in? I'm guessing probably only by removing a wheel

[@PhillWyattProjects]

I don't think a man's bike quite fits even a 26" wheel. If you take a wheel off yea it will fit.

[@Waltergarethdavies]

I have a problem with assembling this unit, the WLBM metal bar is noticeable pushing one of the sides. It measures 137cm, the outer rear panel including the side panels, is approximately 137.4cm. Which allows you to fit the bar allowing 2mm x 2 for the side panels (skin thickness). My problem is the side panels have ribbing to reinforce the wall strength. The measurements check out but they do not allow for the depth of the reinforcement ribbing. Add the size of both sides ribbing, it pushes one side panel outwards. I have revisited B&Q and the one on display has the same problem. I can supply pictures. To my dismay you assembled your unit, and as far as I can see your side panels are fitted flush with the back panel, whereas one side of mine doesn't line up. Would you have any idea what is wrong.