How to build LEGO wings and flaps FULL tutorial

In this video I show you how to build a lego wing with fully functioning slide out flaps. The flaps are built into a custom wing which I show you how to build in this video. If you like these videos I am always open to suggestions on what video I could do next. Please be sure to like and subscribe to get weekly updates from my channel on custom builds.

[@Olszymanski]

Lego plane engine tutorial please

Yes.

[@danielpittard9815]

YES I can never figure out how to build a lego engine

[@ilikelegos1179]

Defenitly

[@nobpyxl5389]

Agreed

[@FNAF_2231]

Yes it would be helpful

[@jeroenelswijk6675]

Gould you make a tutorial of landing gear doors

[@BigPlanesCustomLEGOaircraft]

Sure I think I will do one on doors in general as well

[@jeroenelswijk6675]

BigPlanes nice

[@flatulenceguy1086]

moment of silence for the people who thought he was going to make the wing on the thumbnail

[@Somememeguy_]

Yeah😅

[@Dansvideos03]

Very well explained! Gonna try it out and see if it works!

[@BigPlanesCustomLEGOaircraft]

I’m very glad that this video was useful. I look forward to see what you can do!

[@Dansvideos03]

I do have a little video of my custom built 727, or Yak 42, with front flaps and stuff.

[@Dansvideos03]

where do you get all those legos?

[@BigPlanesCustomLEGOaircraft]

I will typically get them from bricklink but will sometimes get them from the lego store.

[@handyideas6399]

Firefighters fitting fires

[@red_apples3236]

I made a lego plane and added flaps and got a high powered fan, locked the gear and the nose actually lifted.

[@bryandoles4227]

Post a video of it on youtube, would love to see it!

[@quy5836]

I’m here in 2024 and back then in2019 you were my inspiration continue on

[@bryandoles4227]

I always thought you broke the rules of lego til i saw this vid

[@BigPlanesCustomLEGOaircraft]

What rules?

[@bryandoles4227]

@@BigPlanesCustomLEGOaircraft Like using a brick technique that breaks or puts pressure on the lego bricks.

[@minh-khanguyen7209]

At 9:14, to fill the sliding gap with tiles, ideally you should have used the 1x4 plate with a stud on either end and a two-stud long tile length in the middle, which I saw you did use elsewhere. It would have allowed you to fill your 1x4 gap perfectly and keep your wing thickness consistent. :)

[@BigPlanesCustomLEGOaircraft]

Yea. Great point!

[@hahaumidrawbadstuff]

I was about to say that!

[@dagavin4146]

Im going to add a video next time off easier way of flaps, Please watch

[@BigPlanesCustomLEGOaircraft]

Ok

[@austinsus13194A]

i dont think i know anyone that has enough bricks to put flaps on their 5 foot plane

[@dane4ka474]

One-by-fours with two studs fit nicely instead of a lot of other bricks sometimes. Anyway very interesting and useful tips

[@BigPlanesCustomLEGOaircraft]

I agree. This was what I had to work with for the tutorial.

[@clpd6395]

How do You Get So Many legos i have like 130 and they are all the rainbow color

[@ssaricu]

why you are not building complex airliner wings

[@robobob5360]

Where do you buy all the pieces like the wing pieces

[@cherrymaedarlinecirunay5816]

Nice Lego building to Torio of wings impressive and I like it

[@JaysTechh]

I wish he made the wing on the thumbnail

[@soe_tv]

On 747 you had very nice looking flaps. I tried to do this myself and it looks like shit I wanted to make flaps like those on 747 and this didn't helped at all. Although I love your vids and builds I must criticize this one

[@BigPlanesCustomLEGOaircraft]

Each plane is different really. It depends on what aircraft you’re doing.

[@soe_tv]

@@BigPlanesCustomLEGOaircraft i know but I wanted to build those complex flaps like on 747

[@kraken1473]

Nice thumbnail wing

[@leolioniii8646]

How do you manage to have so many pieces ?

[@Dontbother2808]

a like it so much it is so cool

[@claudiabaca3349]

Whole airplane tutorial please

[@BigPlanesCustomLEGOaircraft]

;)

[@yoobeegamez]

My flap wasn’t very tight, can you help me? If you have discord, I can send you what I made so you can help me

[@LegoDeskProductions]

to cover up the inner flaps you could have used a modified 1x4 with only two studs and a tile like center

[@therealgadielsepulveda]

What about a wingtip?

[@SSphotos_edits]

Extendable slats: show us how to make them.

[@brobearbrobear0464]

Leading edge wing slats I would guess are just like the extendable flaps, I mean if you look at the F-100 and F-16's wing slats they extend out and the F-16's at least can turn to fit the speed of the aircraft.

[@mattiagnagno757]

You’re a fucking genius lol.

[@BigPlanesCustomLEGOaircraft]

Nice to hear.

[@zachs9913]

Very nice tutorial, I will definitely use this in the future! Loving the vids btw 👍

[@BigPlanesCustomLEGOaircraft]

Thanks! I will keep making them if you like watching them.

[@vov4ik490]

@@BigPlanesCustomLEGOaircraft got on sanby

[@damienleroy6894]

Hi but where you thought the bricks?

[@BigPlanesCustomLEGOaircraft]

Bricklink.com

[@Flightdeck331]

i have a 747-400 with working flaps and i also put in the iconic tilted landing gear

[@isabelleslok9318]

When you made the flaps I made a technic to slide them before you made something 😅

[@FlyDaminO]

Thank you so much because i was able to build it thx so much!

[@JesusDiaz-ms4zd]

Thank you very much, it helped me make my own Concorde 👍

[@Iamabird19]

What if I have one giant molded wing piece

[@lumibienpenalosa-bernardo4435]

can you make a tutorial about retractable landing gears

[@FNAF_2231]

I'm not really good with making lego planes but this video has helped me soooooo much😀😀😀

[@jacksgamingtime2752]

Can you do a cockpit and landing gear tutorial?

[@ilikethe747]

I JUST LOST MY DOHHOOHHHOGGGg🔥🔥🔥🔥🥶🥶🥶🗣️🗣️

[@ilikethe747]

AND MY BROTHER TOLD ME HOW TO CHAaNGE, THE RAIN!

[@ridrisidclgr3881]

I wanna know how he gets the wings kinda like diagonal.

[@SvZDIl]

😲 Вот это цыганские фокусы. Надо дклать

[@TheQueer23]

there is a 1x4 flat modified that would secure the slideing flaps. but over all a nice build!

[@chanwei21]

hi, what are the parts id you used?

[@JaysTechh]

And is there a list of all the pieces we need

[@IQ900-e2f]

와신기하네요😂🎉🎉

[@Мар-и6ф]

This is perfect👍👏💯

[@SharkyCartelRailroad]

HES A WIZARD !!!!!!!!!!!!!!!!!!! MISSION PASSED

[@Yonatan_Max]

Great video! Although, please try not to move around the build/shake the build too much when building as it is hard to watch.

[@dmvideos7913]

Great video

[@violinandlego]

your good!?!

[@WaffleHorse]

He inspired me to build my own lego thank you big planes

[@陳奕嘉-h5o]

666,Very good

[@chensich7519]

I used to just put a giant piece of brick on my plane..

[@MidnightEagle7860]

Epic!

[@Ph1l7554]

I KNOW HOW TO MAKE WINGS AND I DONT KNOW HOW TO MAKE THE BACK FROM THE PLANE AND FRONT

[@LEGOPlaneMOCs]

lovely wing design!!..

[@BigPlanesCustomLEGOaircraft]

Thanks!

[@robertcsakany8268]

you could also use in that case those tiles with a stud then two spaces then another stud

[@Alex_Eicher]

i'm an architect-engineer and that was very impressive

[@TibberXDproMwoan]

Where does he buy his blocks?

[@BigPlanesCustomLEGOaircraft]

Bricklink.com

[@shungite4953]

Again the guy that watched you're previous video,anyways nice video!

[@BigPlanesCustomLEGOaircraft]

Thanks!!

[@timmeier4136]

hey great video, for connecting the flaps you could also use the tile modified 2x2 33909

[@mariovelez578]

I used the 1x4 version of that, and it works really well

[@ryanbaircraftmechanicandsm7524]

Thanks I really needed this.

[@mariovelez578]

This is cool, I also noticed you can use the 1x4 plate with the flat part in the middle instead of using a bunch of plates and tiles to hold the flaps in place. This makes the wing only 3 plates thick

[@Bangyuck]

Oh good

[@jimmynegunian5221]

How about slap

[@errajota]

Excellent tutorial. Congrats!

[@BigPlanesCustomLEGOaircraft]

Glad it was helpful!

[@superslashers3555]

For smaller planes you could use the tiles with the stud on each end

[@BigPlanesCustomLEGOaircraft]

Good point!!

[@designandcreate]

Very good video and how we make a good fuselage

[@BigPlanesCustomLEGOaircraft]

I should have a video for that coming soon!!

[@designandcreate]

Thanks

[@Donisautistic]

How would you build slats and air brakes

[@BigPlanesCustomLEGOaircraft]

I would use hinges on the top of the wings for the slats and the air brakes. For the slates I would use 2x2 curved slopes.

[@RizkT511]

A very nice video, well explained. but I have one question, how do you cover the wingtip?

[@BigPlanesCustomLEGOaircraft]

Thanks!! The wingtips are up to you!

[@RizkT511]

@@BigPlanesCustomLEGOaircraft alright thanks for the answer!

[@jimmynegunian5221]

Can you made b777 and antonov 225

[@BigPlanesCustomLEGOaircraft]

I could try

[@pietrogottoli4619]

You are doing great!Love your vids!

[@BigPlanesCustomLEGOaircraft]

Thanks! Glad you like it.

[@quin0015]

3:12 voice crack

[@BigPlanesCustomLEGOaircraft]

Yea. Was getting ahead of myself there.

[@LegoCitySkylines]

Good video!

[@BigPlanesCustomLEGOaircraft]

Thanks! More are on the way!

[@ninus17]

i would love to know how to make noses for passenger planes

[@BigPlanesCustomLEGOaircraft]

Ok. I will look into that

[@ninus17]

awsome. and thanks for the amazing videos keep up the good work

[@jcjcjunk1881]

I can't get the hinge to attach properly I'm building the ac130 wing so I need it to extend straight then it uses hinges but it does not work does anyone have any ideas or tips I can do pls thank you

[@BigPlanesCustomLEGOaircraft]

Can you give me a little more detail

[@jcjcjunk1881]

At 2:10 I did that step connected it but then when I connect it it bends and I can't c9nnect it to the base wing I made

[@BigPlanesCustomLEGOaircraft]

The spaceing between the studs and the wedge plates has to be aligned correctly in order to not get a gap. What wedge plates are you using?

[@jcjcjunk1881]

The same ones you are

[@jcjcjunk1881]

I have an idea can I make a video post it in the comments and show you the wing I'm attempting to build will that be possible and you can make a video of attaching wings or making diffrent types of wings

[@legobuilder9877]

Awesome

[@BigPlanesCustomLEGOaircraft]

Thanks!!

[@NiranWStudios]

Very good work!

[@BigPlanesCustomLEGOaircraft]

Thanks!

[@thixuanbui3100]

U should do it a little slower

[@BigPlanesCustomLEGOaircraft]

My computer Isn’t powerful enough!!

[@713ArRzv]

It’s called pause the vid then do it

[@jeroenelswijk6675]

Your tuturials are nice

[@BigPlanesCustomLEGOaircraft]

Thanks! Is there anything that you would like to see?

[@BigPlanesCustomLEGOaircraft]

They can be tough. The best way is to try to design yours off of the real planes. That typically works.

[@LegoWorld92]

I like these kind of tutorial,you have a really good knowledge, thank for sharing it with us, I might start to think to finish my 747 project. Would love to see more tutorial about planes, like how to make am internal structure strong enough to hold the weight or how to attach the wings

[@BigPlanesCustomLEGOaircraft]

Your right. That is one of the hardest parts of any plane big or small. I will be sure to do that.