Converting a genesis 29" fought me all the way, would not have finished without your help. Thanks
@dalemcminnis28219 ай бұрын
Sir thank you so much for your content. I've had such a hard time putting my motorized bike together and It's been a nightmare for me all the other build video go thru the process like everybody know what there doing well I don't. You've went at my pace and explained the process in a way I can understand. Thanks again I'll keep watching and learning.
@HughesMotorized9 ай бұрын
Happy to help. thanks for watching
@Nikatichi Жыл бұрын
My man listening to KMFDM. Thanks bro, best tutorials of their kind on youtube.
@HughesMotorized Жыл бұрын
Glad you like them!
@larryguevara33505 жыл бұрын
A great tutorial on the motor bicycle build.
@timgonzales581710 жыл бұрын
VERRY HELPFULL YOU ROCK AND I LIKE YOUR MUSIC I HEARD IN THE BACK GROUND TO LOL
@denro011 жыл бұрын
Great video ! Thanks for sharing. Hope to see more. It was very helpful.
@HughesMotorized11 жыл бұрын
Thanks..YES more to come
@aaronweaver12182 жыл бұрын
Great set of videos. I'm still working on my first bike. I have to move my motor or get the adapter for the carburetor. That's part of the fun though.
@MrDaveGrowl10 жыл бұрын
Thanks a lot for this video. Definitely the best one out there explaining how to assemble the throttle carburetor. This video helped me get my 700c Thruster to where it needs to be. I don't know what I would have done without it. Looks like when I screwed the cap back on the carb, the spring was bent slightly so it wasn't giving me the pull and click sound like you showed in your video.
@photojunkysdronezonevlog7 жыл бұрын
a little late but your motorized bike videos are the best and very helpful. a big thank you!
@paulglock926310 жыл бұрын
thanks for this video too!
@AgelessNomad10 жыл бұрын
I think I hear ramstein playing in the background. (2:10)
@VicMcFly1116 жыл бұрын
AgelessNomad me too
@flowerpower5552 жыл бұрын
I lubricated my slide with brake cylinder grease and my throttle response got so nice
@flowerpower5552 жыл бұрын
Stopped getting stuck too
@IlluminatedWhiteGuy10 жыл бұрын
Awesome tutorial video! You could get voice over work too, ya sound just like Kevin Costner!
@billybob-jz5mo5 жыл бұрын
Awsome background auido!
@markfrillman57959 жыл бұрын
great video!! very helpful!! one thing i have seen on all these sights is the failure to mention that the wheel bearings in the rear wheel don't last more than a few hours of riding. had to replace mine twice now. looking for a new type of wheel that can take this type of pressure and punishment.
@JohnWaldron-cm7ce Жыл бұрын
Your wheel bearings were not adjusted correctly and/or they need more of the proper grease. Before my motorized Huffy Cranbrook was stolen, I had over 1,000 miles on the bike-John in Texas
@luisrobles48332 жыл бұрын
Q: which 2 stroke would you recomend i spend more time fixing than riding on mine.
@bicycless2118 жыл бұрын
Would you have to put straight handlebars on a road bike for the throttle assembly to mount? Would the motor mounts mount to the skinner frame beams of a 10 spd bike?
@booboos1807 жыл бұрын
It was hard to watch this vid because all i could think about was the music in the backround. Du hast by Rammstien is such a badass song.
@robbeecher23757 жыл бұрын
rammsteien is a nice touch.
@30CalCoreLokt6 жыл бұрын
Are the handlebars for the board track racers just flipped cruiser handlebars?
@timhiggins24459 жыл бұрын
Thanks so much!
@alecc41379 жыл бұрын
Does that website ship to Canada?
@SantisValiant4 жыл бұрын
I have way too much slack in the cable and I don't have though room on the barrel adjuster. Is my housing not long enough? What can I do?
@HughesMotorized4 жыл бұрын
Might need a new cable. Yours just might be too long
@joshuayaddowmotorizedbicyc77084 жыл бұрын
My YD100 engine is revving really high when I pull in the clutch it won't even idle becasue of this issue anythoughts would be helpful
@HughesMotorized4 жыл бұрын
Intake or case air leak?
@joshuayaddowmotorizedbicyc77084 жыл бұрын
Yeah thats what I've been told being its a new motor but I dont see any oily/gas leakage from any of the gaskets
@sherbilsabag45817 жыл бұрын
hey which gasoline do you suggest to use for 2 stroke engine?
@adnanvrbovac89418 жыл бұрын
i hardly have any cable, i can hardly move my throttle any suggestions to fix this?
@trunkslorenzana8 жыл бұрын
got the same problem
@jasumagaming97287 жыл бұрын
Adnan Vrbovac Same problem hede
@joshnorth79006 жыл бұрын
yep me too did y'all find the solution
@eyasumoloro430810 жыл бұрын
i se everything up i pull the clutch in and i try to ride the bike but the back whel is not moving
@JakelaWeeze7 жыл бұрын
My bike won't start every time I go down hill for a start I drop the clutch and give it gas but it sounds deep pitched like it's not combusting I changed the spark plug and the carburetor. Any tips?
@rochmeier96003 жыл бұрын
Does it matter which way the spark plug faces
@HughesMotorized3 жыл бұрын
Either way is fine in my opinion. Some say it matters but I've yet to see a difference
@Mac1812 ай бұрын
6:11 I broke mine trying to pry on the carburetor lol but I think I’m good cause it has the clamp around it
@jordonmanning54649 жыл бұрын
please help me . one of my font motor mount screws broke off inside of the motor mount hole. I need to know how to get the broken piece of screw out. any suggestions would help. thank you!
@tjdukes745210 жыл бұрын
How do i adjust the stock carb on 66cc skyhawk ....how many turns do u recomend on the screw with spring on it wen its turned all the way in
@HughesMotorized10 жыл бұрын
Cant say number of turns. You adjust it till it idles where you want it. Simple as that
@tjdukes745210 жыл бұрын
Ok thank you i think i got it ....im new to this motorized bicycle WORLD your vids have been very helpfull
@scrappadappatv599110 жыл бұрын
I have a new 48cc 2 stroke engine and the carburetor is stuck on full throttle, how can I correct this problem? it had made my chain loosen from being on full throttle all the time. Please Help
@dougbell4283 жыл бұрын
I put on a new carb yesterday it ran like crazy. This morning it wouldn't start. All day I've been unable to get it started. I've checked its getting fuel all the way to bowl so its getting fuel. Someone please help.
@debbiespetfarm10 жыл бұрын
my throttle is loose and leaking gas is there a way to tighten it and get the gas to stop
@HughesMotorized10 жыл бұрын
Perhaps you could email me a pic to my email off of the contact on my website along with an explaination of the problem
@debbiespetfarm10 жыл бұрын
ok i will take a picture and show you thank u
@thediggerman210 жыл бұрын
Nice shirt ! 😂
@victorlarraondo93239 жыл бұрын
i have a question doesnt matter how much y try when i pull the the acelerator nothing happen so the needle dont go back any advice
@HughesMotorized9 жыл бұрын
victor larraondo Sounds like a cable issue. Check that cable is properly installed in throttle handlebar housing
@HughesMotorized9 жыл бұрын
victor larraondo Sounds like a cable issue. Check that cable is properly installed in throttle handlebar housing
@codylee25938 жыл бұрын
i missed the link for buying an elbow to mount the carb on the side and i cant find one online
@HughesMotorized8 жыл бұрын
+Cody Lee Bikeberry offset intake 30mm is most common
@brucepietri84335 жыл бұрын
Is it possible to build a motorized fat tire bike?
@HughesMotorized5 жыл бұрын
Lots of them out there. Just have to move the engine over to allow for fatter tire so chain won't rub tire
@TheMinersMinors10 жыл бұрын
My little pin in the throttle broke off! Any suggestions?
@TheMinersMinors10 жыл бұрын
I was thinking that I could drill a hole in where the pin thing used to be right through the plastic....... Then put a screw in the new hole and try to fit it on the hole in the frame because right now the things just sliding all around. Thanks- AJ
@WhitieDon10 жыл бұрын
TheMinersMinors i have the same issue how d it work it drilling good? any suggestions on pins i should use
@TheMinersMinors10 жыл бұрын
It works great..... I bought a coaster bike ( a huffy) and took the screw that holds the back fender thing in place (I took it off because the chain was hitting it). I am away right now, but I will tell you what size drill I used ( short term memory, what do expect I'm only 14 Lol). Thanks- Alex
@johnfrenger12239 жыл бұрын
We have 3 wires coming out of the motor and only 2 from the coil. The motor wires are black, blue and white. Out of the coil is black and blue. I have no spark. What is the white wire for?
@adnanvrbovac89418 жыл бұрын
you can connect lights to the white wire
@Westhelockpicker Жыл бұрын
Sometimes you have to order a shorter throttle cable because the longer ones you can screw out every adjustment and it's still too long
@CaptBozoe8 жыл бұрын
Hey need help clutch is not engaging the gear around clutch , new install by the way
@HughesMotorized8 жыл бұрын
+Black Bikes Check Clutch Adjustment video by Bikeberry
@philliptigredeville10 жыл бұрын
Hi..I build my bicycle but when I pull the clutch turns off can u help me please
@HughesMotorized10 жыл бұрын
Might be you need to adjust the idle. the idle screw is on the left side of the carb
@philliptigredeville10 жыл бұрын
ok thx for you help sr
@jesuisravi10 жыл бұрын
no brake? Anyway, nice vid. Thanks.
@evanblue8193 жыл бұрын
How do I make my motorbike street legal?
@ericjones4010 жыл бұрын
Very hard to see what you are doing, the camera is too low much of the time and your hands are in the way. Nice shot of the table, just not what people are trying to view.
@tjdukes745210 жыл бұрын
Plz help me thanks
@sesquipedalianstan10 жыл бұрын
All your other videos are great but this one is poorly done. Can't see what you're doing!
@lucasmayfield20307 жыл бұрын
hi every time i rev my engine it takes really long for the motor to return to idle. i tried everything. throttle is perfect and there is no manifold leak. but when i spray starting fluid on where the carb connects to the manifold, it kills it and sometimes revs it u. any suggestions???
@scrappadappatv599110 жыл бұрын
I have a new 48cc 2 stroke engine and the carburetor is stuck on full throttle, how can I correct this problem? it had made my chain loosen from being on full throttle all the time. Please Help