hi hughes motorized i keep adjusting the idle screw on the clone bofeng nt carb , how to keep engine running , will cut off if i slow down or stop ,have to keep feeding gas, ive tried everything ,except jet change

My clutch wouldn’t engage but after trying your tips it worked! Thank you so much

Brand New Minarelli Wildcat not even mounted yet >>>>> ya think that adjusting ring under the clutch tree is kosher from the "RunWell" factory it came from? After-all, the entire clutch assembly needed lube, so that's why I'm asking. You helped! 👍

where do i buy the brass bit you put on the end

Hey I got me a moter off Amazon and it had a bad coil I got a new one is it possible to put on a magneto coil backwards?

What about STEEL pistons?

Thanks for these videos man. Honestly your videos are the best for someone starting out. I've built three and even when I built my first I came to your videos. Your are a great commentary provider. And I also like your tattoos. Keep it up your an inspiration for me and my channel. Although I do not have alot of knowledge like you, your still a great person for this community!!

Does it matter if my power supply cord that I connect is only a 10A/250V?

I'm questioning springs are hardened and not annealed , as that's saved for the builder after setting the spring sizing..

This is awesome!! Very cool looking, i want to build one like that but right now just working on my 3rd motorized bicycle build. Absolutely amazing video thank you for sharing

So can I connect blue to white

Where to get the jets for bofang carb

😮9😅😮8😮99

I locked up my motor but lucky was able to unlock the motor but I have gas and a spark motor turns over so why won't it start

Hugh can we see the yellow cyclone drop loop build!

So I have a question. I purchased the exact stuff that you did hooked it up exactly the way you did and it’s not working. I need to figure out what I did wrong. Any help would be greatly appreciated.

Awesome!!

Thank you so much for the information

my 110 cc will smoke rings around that 80 cc

its not that easy i had a heck of a time

Hey but I had nothing but problems with my back tire what is setting up the rag joint for the sprocket I had a hell of a time but then I watched your video like I said and after I saw your video and you explained how to do it step-by-step guess what my bike is my bike goes fast as hell now thank you I really appreciate it cuz I really enjoy riding now I'm not so upset with what I want to break it and now I can actually enjoy it thank you lots of love for your videos❤❤❤❤❤

Hey bud I just want to give a shout out to you and let you know I saw your video the other day cuz I needed help desperately and what you showed me on the video and told me how to do a step-by-step my bike is actually hauling ass now thank you I'm ranging from 35 to 40 mph now thank you again I only have a hundred cc

I learned more from u than most

Can u run a coaster brake with these kits

How do I remove the rear plate??

7 years ago I got my first kit, Skyhawk 66/80 bike it was great, cruiser frame I cleaned it up and painted it and greased my wheel bearings and such… I would take it from north Florida to Thomasville Georgia every Thursday in the summertime, it’s now a retired pastured relic sitting in my rusty shed, I put golly near 15,000 miles on that bike I never had a problem bad enough to stop me, 4 years ago I bought a 4 stroke 50 kit and made another cruiser bike, I got about 5 or 6 thousand miles on it, I did run 32:1 with 87 ethanol gas cheapest oil I could find, the 4 stroke I run 40:1 with marvel mystery oil, one thing I can tell you for a fact is you get better performance running 40:1, but it’s hard on the bearings and seals and the top end won’t get as many miles before wearing out completely, by the time I had hit 15k taking it to church every Thursday it was very weak and would barely to get 6,000rpm on the 44 tooth sprocket, the seals were leaking into the magneto and clutch… used to be silver and it was caked in grease and the teeth on the sprocket were almost chewed out, never expected it to go that far and I’m sure it would run with a new top end! But it’s been sitting for almost 3 years and it’s pastured at this point.

wait how am i supposed to keep petaling when im trying to pull down the chocke

8:46 i like how he knows its mostly a bunch of teens who just anna get their bike running and start making the neighborhood a f1 track

im gong jack shaft

Can it be fixed, 10:47pm west coast time magnetic, cdi,coils was topic.??¿?

Anyone know why my clutch arm won’t move to the full position and my tire is locked and the clutch wont disengage

Nice review!! And the scooter looks nice!

Is this still available

This is the kit off eBay I want.

How significant is the reduction is low end torque. Does the engine lug at higher gear and lower speeds (which it didn't do with the 15t sprocket)? How has the riding experience changed while riding with a pillion, does it feel weaker to pull?

That last comment did not come out right I have a yd100 with tall monkey handlebars I believe they called so I'm trying to figure out what length throttle cable line and clutch cable line I should be using so I'm basically trying to find out how you measure the length when taking these tall handlebars into consideration should I order the standard 59 inches and 51 inches respectively or go longer

Love your videos Eugene, I have a yd100 handlebars I think they're called so I'm wondering what my length of throttle cable and clutch cable should be is the standard 59 inches and 51 inches respectively if so what should I get for length how do you measure this is my question

Happy Late Thanksgiving 🦃 !!!! 👍

Ive ran the crap out of that lucas for my lawn and tree service in the 10 yrs I've done it. About 2 gal (maybe more) of oil a year at 40:1.

Good morning thank you for the information I try to order thru you but eBay or Amazon ask my pass word and I don’t remember them thank you😊

What type grease should we use on the rear axle and what type bearings to use

Subscribed!! Building my third bike now your videos are very helpful

👍 ⛽ 🔥

that's pretty cool

Actually you can use the 3rd wire as a pick up or a pulse but i dont find a cdi to put in or i dont know enough to wire it😢

2022 got the same kit ,lubed up transmission chain and bearings and never had a problem before I recently upgraded to belt drive ,upgrades are essential arch mount spring loaded chain tensioner hub mount rear sprocket #41 chain , those chains supplied with kit are junk custom air cleaner & modified exhaust, there's a lot of things you can do to make them safer, more reliable, faster if desired but regular maintenance is a must ,Thanks Hughes motorized for all the great tips and videos, miles of smiles 😃 👍

You did I found the ball barely that go's in before the rood on the floor after I took cover off to put the chain on and the rod had not been taken out

How would you get a clutch bearing out if it won't come out on its own

Hello may i ask how to fix that if it is stiff and wont move as it wont let the back wheel move for me

What type of spark plugs are best when dealing with the 2stroke, and what are numbers on the 7g transmission on a 4stroke belt. Answers greatly appreciated.