How to build Ninja Warrior Course for kids: Monkey Bars & Cargo Net

[@heatherfarrier906]

We have began construction this weekend..... has been quite the job digging the holes in our Arizona grounds 😓 💦 but we are determined the get this up and ready for our daughter 👍🏼 We love your idea!!!

[@master-tez9915]

Enjoy this vid. This is exactly what I was looking for. Will use this vid for my monkey bar planning. Thanks for posting this.

[@TXSuburbanHomestead]

Thanks for the comment. Good luck!

[@sandeeppatil2241]

Thanks for posting this video. I could follow it and build monkey bar in no time. Your detailed instructions helped.

[@TXSuburbanHomestead]

So glad it was helpful! Hope your little ninjas enjoy it as much as mine have.

[@gabiwenzelow7348]

Thank you, that's exactly what I was looking for some metal monkey bars as the original wooden ones have rotted out. Also, thank you for demonstrating how to attach the cargo net. I had no idea how to do this.👍👍💯💢💥

[@TXSuburbanHomestead]

Thank you for the comment! I'm so happy this helped!! Best of luck in your build.

[@drewjones4727]

Thank You! You explained it very well. Spring break in the Puget Sound and despite the rain I was able to build this with my 8 year old daughter during our staycation.

[@TXSuburbanHomestead]

Moira Jones Thank you so much for the wonderful note! I am a teacher by trade, so it’s always great to know that instruction I put out is helpful. I have a pegboard video for this as a follow up already on my channel. I also have a video about bars that I’m editing for posting soon. I hope your daughter enjoys it as much as my son has!

[@danirv87]

Did you mention which cargo net you used? If you did, I missed it! There are so many options and I like yours because of the size. Do you have the link? Thanks

[@eoceguera801]

Thank you. One of the best tutorials I have seen. Very helpful!

[@vdlugo1]

Thanks for this AWESOME video. Just finished my kids monkey bars!!! its was great and easy following your instructions. Kids are super happy. Just a few comments: If whoever is doing it is not an expert working with wood, I would buy the screws at least half an inch longer than what you suggest. The reason is in my case the lap joints were not exactly in the center, and when I joint them the 4 Inch long screws didn't fit, had to go out and buy 4 1/2 inch ones. Thanks for everything is an awesome video and instructions!!!!!

[@TXSuburbanHomestead]

So glad it helped! That's why I do this. It's so great to hear your feedback.

[@toleenfaris5740]

Thanks for sharing!! will try to build it :)

[@TXSuburbanHomestead]

I just use Sketchup. It's easy and free.

[@mgutz745]

i did it! thank you sooo much! wish i could post the picture here, i even added a peg board

[@TXSuburbanHomestead]

Excellent! Hope your little ones have as much fun on it as mine!

[@antoniogusman3]

Do you guys have a material list by any chance?

[@iyerse]

Thank you so much for the details, got the lumer and cuts done. Not able to find the exact cargo net, can you let me know the link for it?

[@TXSuburbanHomestead]

It's been several years and the link isn't available on Amazon any more. There are several good options out there on Amazon if you just search "cargo net".

[@dylanchambers4440]

Great project i just had a few questions. Are you saying you have the bars on top (Green) 14 inches apart? How long from one side to the next did you make it? 12 feet? How tall did you make the vertical 4x4 post? Did you use the same bars for steps as you did for the monkey bars? Thank you for all the help.

[@dliu8037]

Thanks for the video, whay is the name of this metal monkey bar?

[@TXSuburbanHomestead]

I believe ther were on the "Swing and Slide" Amazin store. Just metal monkey bars

[@guycheng5891]

Are the 4x4 strong enough for adults without any support in the middle? Do you think using 2x8 is better?

[@TXSuburbanHomestead]

I'd probably go with the 6x6 for adults on the vertical members. The 4-by would probably work on the horizontal components for adults. It really all depends on span. For most adults, the 4-by is plenty strong.

[@kellyparikh2222]

This is a really great tutorial! Thank you!

[@TXSuburbanHomestead]

Glad you enjoyed it. Good luck!

[@kellyparikh2222]

Couple quick questions, what length did you make the horizontal ground supports? Secondly, what did you use for the ladder rungs?

[@TXSuburbanHomestead]

@@kellyparikh2222 I think the horizontal supports are 8'. I used extra monkey bar rungs on one side for steps and I just used 2x4's cut to length on the other side.

[@mvkotekar]

Which software is used to make the design?

[@TXSuburbanHomestead]

This was with Sketchup.

[@Charliebosso]

You should build a ring toss

[@elliotdines]

What were the specs on the Cargo net from Amazon..?

[@TXSuburbanHomestead]

I don't think they sell this exact one anymore because I can't seem to find it, but this one is a pretty good substitute. amzn.to/3LdDbnV Mine is about this 8'x4' size and it works well. You could get one that's 10' or 12' x 4' if you want more slack.

[@frankdemaria1200]

Going to build this very soon. Great tutorial. I'm just not sure which cargo net to buy. There are so many, would you have a link to one you recommend on Amazon?

[@TXSuburbanHomestead]

I know a lot of people like the Fong brand because they are web-style. We got a rope-style like the Aonkey brand. My son likes it, but it stretches. I think the web-style stretches less.

[@frankdemaria1200]

@@TXSuburbanHomestead thanks. I was looking at those

[@mindyjorgenson6228]

Thank you so much for this. You explain everything so well.

[@TXSuburbanHomestead]

Mindy Jorgenson thank you for the kind comments. Be on the lookout, as soon as our weather clears up, we’ll be posting a pipe-based rings course for it.

[@bjleisse]

Would this be sturdy enough to use indoors in a play room without tipping?

[@hastyhighlight]

You mention in your video that you just put post in ground with out cement, correct? Do you have any movement? Any feed back on using Quikrete red bag?

[@TXSuburbanHomestead]

I have mostly grey clay here, so no concrete needed. I would recommend concrete if you have a looser soil. I'd go with the Quickete quick dry.

[@gunikubamonday.comthegamin4802]

Awesome! Im a 14 year old from israel, and I would rly love to build some lache swing bars. How hard is it?

[@scoobydoo7573]

thank you sir great idea I need it for the kids

[@TXSuburbanHomestead]

Thanks! Glad it's helpful! I've got a couple others on my page and will be posting a metal pipe rings course soon, so check back and see what we come up with that may be helpful.

[@dgrusty]

Thanks for putting this together. I plan on building something similar for my kids. A couple of questions/comments...(1) When first constructing, did the vertical poles stay in the ground on there own since you dug 18 inches ? I'm only digging 6-8 inches so am afraid it won't stand straight as I'm constructing. I'll be using ground anchors attached to the support bars. (2) On the support bars, any particular reason for using a bolt all the way through the support bars and vertical beam instead of simply using screws (on each side) from the support bar to the vertical beam ? Thanks again !

[@TXSuburbanHomestead]

Thanks for the comment. The 18" worked really well. I was a little worried, but it's been there for 3 years now and is just as strong as the day it was built. If you're only going 6-8", I'd recommend a strong lateral anchor because if your kids are anything like mine, it will eventually be used for swinging/jumping from rung to rung. As for the through-bolt, I was going for strength. I know an eye-screw would work well, but I tend to overbuild. With the lateral stress on the bolts from time to time, I wanted something that wasn't just reliant on the screw threads biting into the wood fibers for strength. The through-bolt places the stress throughout the beam rather than just localized to the fibers. Hope this helps.

[@dgrusty]

Thanks for the quick response. I plan to add some diagonal supports as well to help stabilize the vertical beams and keep them from rocking. Will probably end up with 8 ground anchors (2 in each corner) as well.

[@danicapra1]

How did You put the vertical poate in the ground? And how Deep?

[@TXSuburbanHomestead]

I made each complete side (2 legs and top connecting them), measured the distance, and dug the holes. They're all 2 feet deep. I was worried at first, but with all 4, it's been sturdy and are still standing strong 4 years later. I thought about having the posts buried 1st then puttingthe horizontal post on, and that may be a good option if you don't have help .

[@hastyhighlight]

Afternoon, Any tips on how to get the post into the ground?

[@TXSuburbanHomestead]

I have a set of post hole diggers, but that isn't needed. You can just dig a hole with a shovel. I've got a lot of grey clay soil, so it holds itself. If you have loose or sandy soil, you may need to put it in deeper or you might need to set it in concrete.

[@hastyhighlight]

@@TXSuburbanHomestead Thanks for quick response. I believe I have the same grey clay soil (North Texas / FWT).

[@barbaramerchant9822]

Where did you buy the monkey bars and what is the weight limit on them? Thanks

[@TXSuburbanHomestead]

Thanks for the comment Barbara. I got the bars on Amazon. Their weight limit is 300#. www.amazon.com/Jungle-Gym-Kingdom-Playground-Accessories/dp/B01CZM2OAO/ref=sr_1_3?ie=UTF8&qid=1506271581&sr=8-3&keywords=Monkey+bars If you've got any suggestion on what else you'd like to see us work on, please let me know and I'll get some videos up. I've got another video on pegboards if you're interested. kzbin.info/www/bejne/a4fKhHasrJx5nKs

[@melissalloya]

Where did you find a cargo net for $25? In my search they have been $100+ for about that size.

[@TXSuburbanHomestead]

We got it for that about 4 years ago when we originally built it. With the rise in popularity of Ninja Warrior, I've seen the price rise on rungs and nets as well.

[@khalessistorm]

Great job!! Your sons a lucky boy

[@heathcooper5419]

Where in Texas are yall located?

[@davidseaton7339]

Quick question mate. What are the length of those monkey bar rungs? Thanks from Australia!

[@davidseaton7339]

If anyone else has built, please let me know. I am thinking of getting these rungs....www.amazon.com/CREATIVE-CEDAR-DESIGNS-Monkey-Bars/dp/B01MSDQZ3I/ref=sr_1_7?dchild=1&keywords=monkey+bar+rings&qid=1572249751&sr=8-7

[@TXSuburbanHomestead]

The ones I got were 21.5" or about 54.5cm.

[@TXSuburbanHomestead]

@@davidseaton7339 smile.amazon.com/gp/product/B0028AED1M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@davidseaton7339]

Thanks Chief. Have discovered a steel pipe fabrication place in my neighbourhood that sells them. Going to try and make it next week. You’re a legend!

[@davidseaton7339]

Thank you! kzbin.info/www/bejne/hH7Clp5_oZiAipo

[@michelletittle4689]

Would this be sturdy enough for adults?

[@TXSuburbanHomestead]

Michelle Tittle The basic design, yes. If I were building this for adults, there are a few changes I would make. I would sink the posts at least 2 feet deep and put them in concrete. I would also get wider bars. This is pretty narrow for an adult the few times I’ve tried it with my son. Those times I’ve done it, it has held me with ease. I’d also recommend a bit longer vertical posts so it’s a bit higher off the ground. Good luck. Hope this helps! Thanks for watching.

[@mcampbell469]

Michelle Tittle shstauys s

[@josephtorres4139]

Nice job. Thank you.

[@TXSuburbanHomestead]

Thanks Joseph! Glad you enjoyed. Thanks for subscribing. As soon as our weather dries up, I'll be posting another video build on building a rings course.

[@katiemazzocco912]

How much did this project cost start to finish, not including tools?

[@TXSuburbanHomestead]

In all, the lumber was about $75 at my local lumber yard. The monkey bars were about $25 and the net was about $25. The connections were about $10. In all, I'm in it about $135.

[@richfyhr2279]

Going to be working on building this tomorrow. Thank you so much for sharing this! Btw, is it possible to reach out to you if we had questions? Thanks!

[@TXSuburbanHomestead]

Good luck on the build. Hope this helps. If you have any issues, the best way to reach me is through KZbin. I get the auto-notification when someone comments.

[@richfyhr2279]

TXSuburbanHomestead Hi again, I actually haven’t a chance to do this, though I do have all the materials. Some new responsibilities and weather set me back a bit 😀 I wanted to ask though, what was the order in which you assembled? My concern is having everything aligning well enough to not be off once I get the posts in the ground.

[@TXSuburbanHomestead]

@@richfyhr2279 I would strongly recommend working from the ground up. I'd start with laying out your holes/footings, setting your posts, and then measure and cut your horizontal members. If you make your frame first, there's more of a chance of mismeasuring your footings and having an issue of setting your posts. Good Luck!

[@vdlugo1]

Hey! Theres so many cargo nets options in amazon its overwhelming, how has it worked for you the one you bought? If good, could you share the link :)

[@TXSuburbanHomestead]

Daniel Lugo sorry for the delay. It’s been awhile, so the exact one we got isn’t available, but the “Climbing Cargo Net” sold by Playkids seems like a good substitute. I’ work on getting the link up today.

[@vdlugo1]

TXSuburbanHomestead awesome! Thank you man, you rock!! I found it in amazon

[@robertabel5814]

Why not just lay the horizontal 4x4 on top of the vertical 4x4 and drill the screw/bolt vertically instead of the weird cut and horizontal connection?

[@TXSuburbanHomestead]

Robert Abel Because a lap joint is the most basic joints in joinery. It makes a very strong joint when you secure through it. If you were to try something like you suggest, you would have to use lag bolts into the end grain of the vertical members. Anytime you secure into the end grain of wood, it isn’t very strong. It will have a tendency to either work its way out or have significant tear out.

[@nathankirschner5486]

Your awsome

[@TXSuburbanHomestead]

Thanks buddy, I appreciate it!

[@SissyOlive]

Can you get me that

[@osheas]

love

[@wolftitanmask9539]

i was thinking it would look better if the cargo net was stretched mor out :/

[@TXSuburbanHomestead]

You're right. The lesson learned there was that it used to be more stretched out when I first built it. Use and environment cause it to sag pretty severely.

[@wolftitanmask9539]

o ,hmm maybe u can enforce it a lil more make a tunnel that leads up to a platform with monkey bars and put some rubber peices for saftey so he dont fall or anything

[@wolftitanmask9539]

and maybe change the cargo net with like a more stronger rope and u should add the warped wall