How to build TAMIYA Honda NSR 500 Factory Color - PART 2

[@GyuHobbyRC]

Cool video I saw it well.

[@FaizalYusof_MFMY]

Thanks a lot....

[@Dribbsthatsme]

Putting that screw is a pain

[@FaizalYusof_MFMY]

Totally agree. The screw is too small and horrible if missing it

[@Dribbsthatsme]

@@FaizalYusof_MFMY I dropped one no clue where it went

[@FaizalYusof_MFMY]

@@Dribbsthatsme very sad when one part is lost. You didn't try to buy that screw from a hardware store?

[@Dribbsthatsme]

@@FaizalYusof_MFMY no not yet

[@FaizalYusof_MFMY]

@@Dribbsthatsme find & finish it... lol

[@Daniele-rz3qg]

Sorry dude, I have so much problem with the frame. When you put the glue is so perfect but my model is horrible. So much space and is not stable. In this situation is difficult to continue. And if, in the future, it will gone with all the other parts attached? Horrible 4 real

[@FaizalYusof_MFMY]

Very disappointed to hear that, may I know what kind of glue you used? To hold the glued parts together, I usually use a clamp so that it cures clamped

[@Daniele-rz3qg]

​@@FaizalYusof_MFMY i use the tamiya extra thin cement. The problem is/was the precision of the frame. Hope that this situation will not happen again. Thank u for the reply❤

[@FaizalYusof_MFMY]

@@Daniele-rz3qg Ohh I understand now. It's okay, you'll figure it out eventually. Every kit is a learning process 😀😀😀

[@Daniele-rz3qg]

@@FaizalYusof_MFMY yeah, you are really awesome. It's so funny because every kit seems different from other. (Example: in my kit, the swin-arm doesn't have the pieces of plastic that allow the pieces to attach properly and i have to use the elastic spring to block them. Is a fight but is a beautiful travel)

[@FaizalYusof_MFMY]

@@Daniele-rz3qg Thanks a lot, but I still have a lot to learn....😅😅😅 Maybe there is a defect in your kit. It doesn't matter, you will get a lesson on how to handle it later...

[@mattjacomos2795]

This kit is very poor quality and the instructions are incorrect.... Instructions say to mount the engine unit into the frame BEFORE the Swingarm... There's little indication of how to mount the exhaust. Instructions for the radiator hose are wrong. if it wasn't for this video I'd smash it into a million pieces...

[@FaizalYusof_MFMY]

What you said is correct, because it has happened before so I always try to install dry fit first. Anyway thanks for comment and watching my video for reference.😃😃😃