How To: Bumper & Headlight Removal on Infiniti G37

Hey guys! This is my first video for the channel, I hope you all enjoy.
In this video I will be shown how to remove your front bumper, headlights, as well as taking apart the headlights themselves!
WHAT YOU NEED:
10mm socket with ratchet
Flat-Head Screwdriver
Phillips-Head Screwdriver
After removing the front bumper, you should pre-heat your oven to 150˚.

[@jarsky]

Pro Tip for anyone watching this: After a long day, you dont need to remove that panel in the center over the radiator for removing the bumper or the headlights. You can just remove the clips at the front and the 2 front bolts.

[@rodgiek]

I really needed help and this video had it. I also sent you an email about a few Qs I have about the g37 I recently bought as a project car. Thanks

[@therealest8104]

You can take apart the entire car with a 10mm XD i personally found this out when i was working on my G35

[@nicoleinchrysalis7871]

Very detailed video! Made removal easy without breaking any hidden clips etc. TY! Love the exhaust, sounds perfect!

[@mikestyles499]

I cannot believe how many steps are involved in this. Unbelievable. Nothing I’ve ever seen, (as far as replacing a headlight), has ever been this difficult.

[@ExpremeG37]

I know, I couldn't believe it earlier. It can be such a pain.

[@Mrkinghal0]

Dude keep up this great quality videos, best explanations I’ve seen in KZbin bro. Good stuff.

[@ExpremeG37]

Thanks! I watch a lot of how to vids and I wanted to try to make something that had all of the information that people may need.

[@johnmoore3504]

Helpful video but not 100% accurate. Radiator shroud doesn’t need to come off. Just those front push pin style clips. Also to remove the sides there is another 10mm hiding in the front wheel well. Pull the splash guard down slightly, you’ll see a little notch to get a pry tool in there. The bolt is right behind that notch, it keeps the bumper aligned to the fender at the very edge. The bolt comes out straight down. If you have the fog lights in the bumper you need to unclip the wires connected to them too. The wires are pretty thin so be careful.

[@Appforyou510]

Great quality video and great instructions. Helps so much !!!

[@msgirl01]

Very helpful! I did mine last night. I didn't even realize how much money I was saving until I watched the video. I just ran out of time to take it somewhere before leaving for vacation. U r saving lots of people lots of $! Suggestion for improvement would be a tool list in the comments to gather them up front b4 starting.

[@ExpremeG37]

Hey! Thanks a lot for the feedback! I'm happy I could help!! I will update it to show a list of tools required.

[@shad3128]

Thanks a lot dude, once this weather clears I'm gonna be putting my gen 3 intakes in so... this vid was super helpful

[@ExpremeG37]

Not a problem my man, keep moddin! 👍✌️

[@fearwiggles2006]

Best video by far

[@ajferri8978]

the intro gotta be the funniest thing he sped the video and kept the audio the same speed

[@dfacedxa]

yo i wanted to say thanks. this video helped me out a lot while removing my headlights.

[@wilrosh7]

Thanks for the great video. Very helpful.

[@coleadams9628]

Just did mine and you don’t have to take off the bolts from the first (8red) (2yellow) 10mm boots btw :) thanks for the awesome video tho everything else is great!!

[@DannyDuhDemon]

Can you do a video on those custom headlights and how you wired them and everything?

[@CoDandHaloGuy]

hey man just came across your channel, keep up the great content and help, best wishes :)

[@ExpremeG37]

Thank so much!

[@johnboy5632]

Thanks man for the video. I'm gonna have the new switchback headlights installed here soon.

[@ExpremeG37]

Not a problem! Happy to help!!

[@_n0th1n_prod54]

this is a great tutorial, great detail man i like it 👏🏻

[@ExpremeG37]

Thanks so much dude!

[@Gtboy196]

Wow this is exactly what I was looking for god bless

[@ExpremeG37]

Thanks man! Happy to help.

[@briscoe186]

Great content! Def new subscriber.What CAI and splash shield are you using?

[@ExpremeG37]

Thank you! I'm currently working on a lot more 😉 CAI is Stillen Gen 3, and splash shield for the CAI or under engine? Either way the answer is none.. 😅

[@briscoe186]

Expreme G37 lol sorry well I ment to cover the cai. I wanted to get the long cai but I was told that water might get into my engine.

[@youngballer7441]

Where did you get that spoiler?

[@khazoury]

You just pop out the sides from the bumper? Isn't it connected with 2 Philips screws?

[@TM45GAMES]

Hey could you tell me what spoiler that is? Trying to find one that fits and I love that one! Thank you

[@Cartjayden]

Great video!

[@user-iq2rm6fg3i]

Where’d you get the headlight from?

[@alexcodreanu2985]

where did u get that wing???? i need it!

[@joshw8178]

Mind if I ask what spoiler that is?

[@kingdiri]

Much appreciated.

[@SubToTripleThreatRC]

Great job, thumbs up! 👍👍 Subbed - (Keep the videos coming!)

[@ExpremeG37]

Thanks so much for the support!

[@MumbleVlogs]

Good video man keep em coming

[@ExpremeG37]

Thanks dude! Definitely will.

[@etosgarage3099]

Came across your channel today, what kind of wing do you have ?

[@tomaslopez4322]

I see you're running gen 3 intakes, is your g tuned or stock tune?

[@Jay_DM]

what spoiler do you got?

[@brandondrifts9547]

Ready for evergreen this season?

[@ExpremeG37]

Oh you better believe I am! I can't wait

[@User-nn5wu]

What size are those halos bro? I just subscribed

[@spikebro4247]

Where did you find your car tail???

[@aguilarsixto9]

Hey this would be the same for the Q60s right ?

[@ExpremeG37]

OMG! Im so sorry for the late response! So in 2014 they re-branded the G37 to Q60. The 2014 is exactly the same as the 2013, just a new name. So yes, kinda. I have yet to get my hands on a Q60 but I would assume it's a very similar process.

[@aguilarsixto9]

Expreme G37 it’s okay man ! And ah okay just making sure cause I have the 2015 Q60s but still basically the same as the g37

[@mlolo17500]

Damn baby girl!

[@ls3_saif]

Is that a g37x?

[@awesome12345678ify]

What are all the mods that you have on your car?

[@ExpremeG37]

Stillen Gen 3 Intakes, Z1 Ported Intake Manifold Upper, Invidia Test Pipes, Tomei Titanium Exhaust, Eibach Lowering Springs, and a whole bunch of adjustable suspension components from Z1 Motorsports.

[@Mall_Crawling_X]

Subbed for future content! :)

[@ExpremeG37]

Thanks so much for the support!

[@VampinTy]

Did you have to take all the wires off the back before placing in oven ??

[@ExpremeG37]

I did not take the wires off of the back, though I would recommend removing them just to be super safe. But as long as you check on the headlight, you should be fine!

[@VampinTy]

Yea I didn’t. I did it last weekend. Your video was nice. Got the water out my headlight and it’s sealed. Thanks !

[@dos8679]

ExpremeG37 what kind of exhaust do you have on you G37

[@ExpremeG37]

It's a Tomei ExpremeTi Titanium exhaust

[@WenjieLiu]

is it a 2010 G37?

[@ExpremeG37]

It's a 2013, but same thing haha

[@RzVids]

Looked so easy but I got discouraged at the glue lol that’s so weird

[@ExpremeG37]

Ah I see. The glue is definitely the hardest and most important part of the whole process. You can peel them apart and customize them all you want but if they aren't re-sealed properly, you're going to have a bad day haha.

[@agentgray7713]

I thought it was going to be easy too much work for me

[@ExpremeG37]

😂 Which part? The headlights or the bumper? Yeah it is a bit, and it can be a pain and tough on your hands at times.

[@natethompson5296]

Thumbs up from anyone else that has to spend 600 on a new set of headlights now?