How-To: Canon EOS C200 and C200B Video Training Series- Shooting with the Camera

[@elireyna5712]

Thank you. I'm getting a C200 in two days. Now I am scared. :) I have to watch your video again. You're a very good presenter. Thanks.

[@CanonUSA]

Congratulations on your new EOS C200! We assure you there's nothing to be afraid of and we're confident you'll be making professional-grade videos in no time. If you need help or have any questions, call us 24/7 at 1-855-CINE-EOS (1-855-246-3367). Thanks for being part of #TeamCanon!

[@chian-hsianglin609]

I am a new c200b user, the video is very helpful for me! thank you a lot!!!

[@rsanoian]

This was great Jem, thank you and look forward to more videos on the C200!

[@bowenrey1633]

instaBlaster.

[@ActionMediaProductions]

Nice to see you Jem; not sure if you remember me, I took your lighting class at cine Abel a few years ago and you were a big influence on me getting the c100 M2. I’m thinking about renting c200 for next Doc.

[@Meech320]

GIVE US A 10-BIT UPDATE! Highly considering selling this and buying ANY other camera to get that 10-bit SD recording option.

[@PatrikProduction]

Aren't there better colors in 10 bit vs 8 bit@MEDiAgamer? Say I'm delivering online but want to shoot flat and color my footage. Wouldn't I achieve better results with 10 bit codec?

[@RedLensMedia]

You have 10 Bit in 4K 60 FPS RAW Recording. ;)

[@DaveSy]

Ahhh I'm so tempted to sell my 1D X II and buy this! It has pretty much everything I want.

[@sightandsoundvideography]

Thanks for this Canon! We just got ours. Loving it so far!

[@hyalightfilms4545]

I wish you would have put this out months ago - so helpful.

[@airbeoneairbeone2872]

Thanks Jem precious to hear you :)

[@kyawkyawwin3410]

thank you

[@Brett.Hatfield]

Any idea how to get my OSD back? Was shooting raw at a wedding via hdmi and an e50 monitor. Noticed my card was low, so I paused and went over to mp4 main recording mode, my c200 is a brick now. I have OSD set to on in the media mode, but there’s no OSD at all. Any idea what I need to do?

[@MattShockley]

Great video and very helpful!

[@jakejames1591]

How would you suggest exposing exteriors? Landscape shots? Just be sure not to clip highlights or lose shadows?

[@olioldroyd7534]

Thank you, great tutorial. Are you/have you done one on audio capture for c200?

[@CanonUSA]

Hello Oli. We do have another video for audio setup. Check it out at kzbin.info/www/bejne/fX-pi3d7frOXqNU We hope this helps.

[@tempest63132]

In real world use, it is best to generally overexpose to 40-45 ire as opposed to Canon's suggested 34.3%?

[@joethedesertknight]

I accidently recorded in 50p when I was set at 23.98fps. The issue was I was adjusting settings to get my HDMI monitor to work with the C200. When I got it to work, I did not realize the system changed automatically to 50p. Is there a way to use this footage with 23.98fps footage? Or, should the whole project be shot as the same 50p? It's a short film in the U.S.

[@CanonUSA]

Hi! Our Cinema team is happy to help you. You can reach them 7-days a week at 1-855-246-3367.

[@quiztasiarocks]

Hey Canon, any news on a c200 mk II?

[@therealjimmy5411]

How do you do any of this with the C200B? No EVF no monitor?

[@robojim4000]

What grey card is this? So hard to find a big one!

[@eddieh3403]

Hi Jem, I have the C200B and using the Zacuto Gratical as my viewfinder. However it does not work in 60p mode. Do you know if I can make my SDI or HDMI 30p even though I am shooting 60p Raw?

[@CanonUSA]

Hi Eddie. Our team of experts is happy to go over this with you one-on-one. Please give them a call at 1-855-CINE-EOS (1-855-246-3367). We look forward to hearing from you.

[@ethan7793]

When making changes under the "Custom Picture" settings - ie. Color Matrix, Sharpness, etc. - do those selections affect the RAW footage? Or does it only affect the MP4 footage?

[@CanonUSA]

Hi Ethan. For RAW footage, the final settings like brightness, sharpness, color space and gamma are determined when you develop the RAW using the Canon Cinema RAW Development software. We have another video in this series that illustrates post-production workflow for RAW. Check it out at kzbin.info/www/bejne/hWqni2ttmNqmn7c We hope this helps.

[@ethan7793]

So if I wanted to shoot in RAW using the Production Camera color matrix, how would I do that? I don't see that as an option in Cinema RAW Development.

[@Franckystudios]

Would love to see a normal 4K signal out not RAW of the Canon C500 or low bit rate 4K internal recording.

[@CodyScott]

When shooting in raw, what lut can be used to view rec 709?

[@CanonUSA]

Hi Cody. There is an available BT.709 LUT you can use. Our team of experts is happy to help you set it up. Feel free to reach out to them directly at Canon.us/ContactYT We hope this helps.

[@sickhcivc]

I see there isn't an option to send a lut to HDMI, what image am I seeing on an external monitor? Is it clog 3? I'm shooting in raw 10bit btw

[@CanonUSA]

Hi there. Our team of experts is happy to go over the HDMI output and options that are available with you. Please reach out to them directly at Canon.us/ContactYT We look forward to hearing from you!

[@KatVeri]

What are the settings to ensure my external recorder is getting the 1080 4222 10 bit signal out? Using an Atomos Showgun to external record. Thanks!

[@CanonUSA]

Hi Kat. Our team of experts is happy to go over the various configurations that will allow you to record an output signal at 1920 x 1080 YCbCr 4:2:2 10-bit. Please give them a call at 1-855-CINE-EOS (1-855-246-3367). We look forward to hearing from you.

[@MattSolo]

www.reddit.com/r/cinematography/comments/b2tpum/canon_c200_owner_looking_for_advice_with_atomos/

[@robojim4000]

How do your blue lights at the back look blue?! Mine only look purple!

[@alloneword154]

So no lut ever get actually recorded to the raw files?

[@CanonUSA]

Hi: Our friendly Cinema agents are happy to review the C200 LUT options with you. They can be reached at 855-246-3367, 24 hours, 7 days a week, excluding holidays. We hope this information is useful.

[@CurtisMedina]

When I switch back to Raw, the frame rate is greyed out and can't be changed. Why would that be?

[@CanonUSA]

Hi, Curtis! If you've got questions that your manual isn't able to answer, our Cinema EOS support team will be happy to do so. They're available 24/7 at 1-855-CINE-EOS (1-855-246-3367). Hope to help you soon!

[@Brett.Hatfield]

color matrix and all of that stuff is blacked on mine...weird, all i have is canon log 3 and canon log and off

[@CanonUSA]

Hello Brett: You may want to verify whether you have the [Preset] menu option to [Off] If you have selected a [Preset] some of the other options under the [Custom Picture/HDR menu tab will be grayed out. See 10:28 in this video or page 129 in the C200 manual. If you still need help accessing all the menu options, our Cinema support agents can provide one-on-one assistance. Owners and users of Canon Cinema gear can access support at 855-246-3367, 24 hours, 7 days a week, excluding holidays. We hope this information helps.

[@ChicoDaUno]

where do you find Canon Log 2 ?

[@CanonUSA]

Hi there. Only Canon Log 3 or Canon Log are available on the EOS C200. We hope this answers your question.

[@RedLensMedia]

C-Log 2 will be recorded while RAW recording. All settings you make are not effecting the RAW recording. They are effecting just your .MP4 recording.

[@noah.w.anderson]

Can you send me a C200 for review!?

[@deroux]

Why would you choose blue peaking when your scene is so blue? I would choose a color that is not in the scene.

[@CanonUSA]

Hello Andie: The camera provides you with 4 different colors for the peaking feature. This allows each user to select the color that works best for them.

[@deroux]

@@CanonUSA great thanks!

[@deroux]

@@CanonUSA I just picked up a c200! Nice camera!

[@ahahlex]

Does false color can be displayed on screen ?

[@CanonUSA]

Hi Alexandre. It is not possible to display false color on the screen. We hope this answers your question.

[@ahahlex]

Yep, Thank you ! just ordered a C200, love this camera

[@Whoiswhitemayne]

if I purchase a c200b how am I able to control the camera without screen?

[@CanonUSA]

Hello! You will need a monitor or viewfinder to make adjustments to the camera settings and frame your video.