How to Cast Objects with Epoxy Resin | Tutorial | EPODEX

It is no wonder that epoxy resin decorations are becoming increasingly popular. That polyvalent synthetic resin allows you to make personalised decorative objects to match your taste. No matter, whether you are just starting and planning a small project or you are an expert and want to make some fancy and elaborate accessories: It is all possible with epoxy resin. EPODEX has the perfect resin for every application. Transform everyday objects into decorative works of art with our high-quality epoxy!
www.epodex.com/en/epoxy-resin...
EPODEX - Always The Right Choice!

[@KeyserTheRedBeard]

brilliant content EPODEX - UK. I shattered the thumbs up on your video. Maintain up the brilliant work.

[@epodex-uk3877]

Thank you for the feedback :) Team EPODEX

[@jimmykirsch3073]

Hello! Helpful tutorial. Whats the best way to ensure that the object being encased is not up against the edge of the mold? In this video how did you make sure the flower petals wwerent sticking out during sanding

[@epodex-uk3877]

Hi Jimmy, Thank you for your interest in our products. We recommend pouring a thin layer at the base of your mold. Then place the flower inside allowing the stem to sit in the poured epoxy and wait until the layer becomes gel like. This way when you keep pouring over it wont float or move around. Your EPODEX Team

[@kennedyeckerty7997]

How long do you think it would take to make a resin mold for a few flowers? I have them leftover from a family passing and I’ve never done a resin project before so I’m not sure where to begin

[@epodex-uk3877]

Hi Kennedy, Thank you for your interest. Building a mould is relatively easy and can be done with plexiglas and silicone. Don't hesitate to send us pictures of your flower per email ([e-mail]). Our team will gladly assist you with your project. Kind regards, Team EPODEX

[@henab765]

Also can I use my own pigments/mica powder for this resin?

[@epodex-uk3877]

Hi There, It is possible to mix your own pigments into the resin. We recommend to do a small sample test before mixing a large quantity.

[@henab765]

Hi what’s the maximum heat resistance for your resin and can it be used for coaster making?

[@epodex-uk3877]

Hi there! Our resins can be used to make coasters. Their heat resistance is approx. 60C

[@FactsaboutCatsVideos]

Do I need to use a respiratory mask when working with this product? Also, what gloves should I use?

[@epodex-uk3877]

Hi :) Our products are chemical products but once cured and hardened they are not toxic and do not pose a threat to one’s health. Our products are remarkably odourless during processing, but we always recommend wearing a mask, protective clothing, and gloves (nitrile). Goggles can also be to protect one’s eyes. When sanding and griding surfaces please wear a respirator mask to avoid inhaling dust. Always work in a ventilated room meaning that the doors to the room are open to provide adequate air flow but do not open the windows as humidity can affect your work. Team EPODEX UK

[@henab765]

How long do you mix for? And what’s the working time?

[@epodex-uk3877]

Hi there! We recommend to mix the resin-hardener mixture until it is streak-free. Here is the link to our datasheet where you will find the working time of each resin : www.epodex.com/en/system-comparison/

[@kuwabarakazuma6313]

Thank you

[@epodex-uk3877]

You're welcome :)

[@Sam-yr8ls]

I have been using amazing clear cast, and I have had constant problems with bubbles no matter what temperature/mixing technique I use. Does this one require any other things done to it to get no bubbles other than the mixing stick mentioned? Just pour through the mixing stick? If so I'm definitely buying some. If its about 3cm thick, would I have to keep going back with a heat gun to get rid of bubbles or not? At 2.33 your jug is literally filled with bubbles? 🤔

[@epodex-uk3877]

Hi there, all our resins contain debubbling agents. Mixing both components thoroughly leads to bubbling as seen at 2:33. As the mixture reacts, the bubbles slowly disappear leaving the resin to cure perfectly clear and bubble free.

[@nickfatsis9607]

You can always change the viscosity of your resin by mixing it and putting the mixed resin in its mixing cup into a warm bath of water, around 40C, as the viscosity becomes more like water, the bubbles will rise very easily, you can then use IPA to break the bubbles on the surface.

[@rickymoreno5593]

What if I want to put something I made out of card board to cast? Would I need to prime it first?

[@epodex-uk3877]

Hi Ricky, thank you for your interest. Yes, it must be primed first to ensure it is non-absorbent. Team EPODEX

[@WayIntoAdventures]

Hi, I don't have a scale, can you help me understand how much to mix together? I have Epodex Pro Ultra clear and I want to cast a small peice of turf from the PSG stadium that I got. It isn't very big and will only be about 10cm x 10cm x 10cm. Thank you!

[@epodex-uk3877]

Hello, Thank you for contacting us. The scale is required to weight out each component so that you can precisely adhere to the mixing ratio of 2:1 (2kgA:1kgB). For layers of up to 10 cm you should have purchased the Pro MAX System. The Resin A-component will say Pro Resin but the Hardener B-component will say Pro MAX. Is this the system you are using? Mixing Instructions: Mix the resin A-component with the hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener). Stir through the edge and bottom of the mixing cup as material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together. Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup. Let us know if we can be of any moe assistance :) TEAM EPODEX

[@TidmouthSheds]

Can this be suitable for casting into moulds that make complex shapes like spoked wheels or something like that?

[@epodex-uk3877]

Hi Gordon, Ofcourse :) Do you have the moulds already? How thick do you wish to pour the epoxy resin? Team EPODEX

[@afafsfsgdhfgdgfh]

Can you use a silicone mould? Like the ones used for chocolate???

[@epodex-uk3877]

Hi there, yes any silicone mold can be used!

[@andrewanderton]

I’m casting a resin mold roughly 30 x 15 x 10cm. Room temp is at 15°C or lower and using your EPODEX branded PRO MAX 10cm deep pour epoxy resin. Can I fill it up all in one go? Or will I need to do it in layers?

[@epodex-uk3877]

Hi Andrew, it is possible to pour it all in one pour. Make sure that your room temperature doesn't go too low otherwise it could prevent proper curing.

[@WayIntoAdventures]

How did it work? How did you keep the item that you were casting from sinking to the bottom?

[@epodex-uk3877]

Hello, You need to fill the mold with a small amount of epoxy and then place the embedded object inside. Then wait until the mixture becomes gel like so when you pour over the embedded object it doesnt float around :) For more information you can always email us at [e-mail]. TEAM EPODEX

[@E3lcpl]

In trying to find the right epoxy Resin to cast my own Key Caps , right now the Resin i am using doesn't get hard even after pulling it out of the mold . not sure if my process is wrong or the Resin im using is not the correct type . what Resin would you recommend ?

[@epodex-uk3877]

Hello, We recommend the Pro System. www.epodex.com/en/product/pro-system/ The epoxy resin PRO system is ideal for coating surfaces and making jewellery and small objects. It can be poured up to 2 cm deep per layer. The Resin A-component and hardener B-component are included in each set, as well as the desired colour dye or pigments. Instructions for use can be found on this product page. 24 hours at 20°C to harden and 7 days for full chemical curing to occur. You can use a demoulding spray if needed but epoxy never bonds to silicone moulds :) Team EPODEX

[@spazsy_1430]

What happens if I put a piece of yarn in it? Will it get bubbly? Will it be visible or will it show bubblesa around it

[@epodex-uk3877]

Hello, to clarify you are looking to cast a piece of yarn?

[@spazsy_1430]

@@epodex-uk3877 Yes, thats correct

[@ehizofuareality2475]

Please where can I get epoxy resin to buy in Nigeria Edo State and how much is it?

[@epodex-uk3877]

Thank you for your interest in our products. We do not ship to Nigeria at this time.

[@goldfish2289]

The release agent also does what now? Then what’s it’s fist purpose?

[@epodex-uk3877]

Hello, Thank you for contacting us :) The EPODEX Separatng Agent Spray is ideal for casting applications with epoxy, polyurethane, acrylic and polyester resins. Ideal for applying to smooth GRP and silicone moulds and in combination with the EPODEX Separating Tape. Excellent separating and sliding effect. Thanks to the fine spray mist even angled areas can be reached. Team EPODEX

[@ob1kanobi817]

Do you have the video of the football being casted in resin?

[@epodex-uk3877]

Hi Shane, keep watching this video to see how the soccer ball is primed :)

[@harrisonthecarguy3734]

whats the resin/hardener ratio

[@epodex-uk3877]

Hi Harrison its a 2kg:1kg mixing ratio. If you have any other questions do not hesitate to ask :)

[@lindah6288]

What u use to clean the mix cup?

[@epodex-uk3877]

Hi Linda, it is possible to clean the tools with acetone. If you are using our plastic mixing cups, you can leave the resin cure in the cup and get it out by tapping on the bottom of the mixing cup.

[@marianwielkopolski2215]

Hello! I have two questions: 1. Which resin is the best for casting big objects? PRO + system? 2. Was the rose real or artificial?

[@epodex-uk3877]

Hi Marian, Thank you for your interest. The Pro Plus System is the best option for deep pour castings. www.epodex.com/en/product/proplus-system/ The rose is fake as well. It is easiest to use a fake flower as real flowers need to be 100% dry. Team EPODEX

[@GodisMyNo1]

Can you use a real rose, a fresh one?

[@epodex-uk3877]

Hi Bela, Thank you for your interest in our products. If you're preserving natural flowers, it's crucial that they're completely dry before casting them in resin. If there is any moisture in the flowers, they will rot in the piece over time. Letting the flowers dry in a container covered by the silica gel preserves the form of the flower in 3D. To press the flowers, simply place them between two pieces of parchment paper inside a heavy book, and allow them to sit for about a week. When working with dried flowers, the flowers will often float to the top. It's best to create the piece in two layers, the first being the placement of the flowers and the second filling the resin to the top of the mould. The product to use is the Pro Plus System. www.epodex.com/en/product/proplus-system/ The epoxy resin PRO+ system is ideal for making river tables and large objects. It can be poured up to 5 cm deep per layer. After curing, you can apply layers repeatedly until the desired depth is reached. The Resin A-component and hardener B-component are included in each set, as well as the desired colour dye or pigments. Instructions for use can be found on this product page. Casting resin Layer thickness: 0,1-5cm Ultra-crystal clear, UV stabilised, VOC- and BPA-free Use: River table, large moulded and decorative object making and much more.. Hope this information helps :)

[@GodisMyNo1]

@@epodex-uk3877 thank you so much for taking the time to answer

[@kevthedev2.069]

Nice video

[@epodex-uk3877]

Thank you for watching :) Team EPODEX

[@paulpeters2081]

can this prouduct be machined in a cnc ?

[@epodex-uk3877]

Hi there, once completely chemically cured our resin can be machined in a cnc.

[@Flux_One]

No delivery to the UK, why?

[@epodex-uk3877]

Hi Scott, shipping to the UK that was temporarily suspended due to Brexit. We are actively working to resolve it and hope to be back up and running soon! If you´d like we can add you to our mailing list to be notified as to when an order can be placed. Let us know if your interested :)

[@Mason_Stinky]

Is it like rubber? I’m confused

[@epodex-uk3877]

Hello no its epoxy resin :)

[@kierand9410]

Why is there a 30cm limit? Is that over any surface area? What happens if you exceed 30cm?

[@epodex-uk3877]

Hi there! Yes the resin can overheat which would lead to cracks, bubbles and yellowing. For deeper castings, we recommend using our even less reactive epoxy PRO MAX. www.epodex.com/en/product/pro-max-system-resinhardener/

[@kierand9410]

@@epodex-uk3877 thanks. Would I still get the crystal clear effect? I want to create a coffee table sized slab of resin with a flower arrangement inside it.

[@epodex-uk3877]

@@kierand9410 Yes our PRO Serie is crystal-clear

[@MrVbgames]

What happens if I put a real rose in it? Does it rot and stink?

[@epodex-uk3877]

Hello, The rose or any real flower must be 100% dry before it can be casted into epoxy resin :) TEAM EPODEX

[@justin_lal]

Imagine drinking that lol

[@lucashayden5699]

No

[@epodex-uk3877]

Hi Justin, that is definitely not advised. It is a chemical product ;)

[@daddyg2391]

@@epodex-uk3877 💀

[@fireandflesh]

I took a shot of it, and i was fine

[@a_stoned_raccoon]

Tide pods and bleach all over again……..

[@MilkCrate801]

what if the object is 35 inches tall?

[@bladelefusyn3337]

Do it in parts/layers/sections. A lot of projects require multiple sessions to get the job done, some of the more intricate layering works take ten times that.

[@epodex-uk3877]

You would then have to work in layers :)

[@KirkFields]

👍☺️✌️

[@deathgamer03]

Imagine Casting Minecraft PS4

[@epodex-uk3877]

Sounds cool :)

[@xXUNDERLORD77Xx]

Disappointed in the epoxy when arrived part A rosin was gloopy and ruined

[@epodex-uk3877]

Hi Jake, Thank you for contacting us. Due to colder temperatures in transport, we would like to point out that the A-component (epoxy resin) can crystallize while you store the jugs in cold temperatures. This has the effect of a cloudy, milky thick appearance. White residues may also appear on the edge of the container. No need to worry! You can simply reverse the crystallization. Please place the containers in a water bath of boiling water with the lids tightly on. A few minutes are sufficient on each end of the bottle submerged in the water to reverse the crystallization. Afterward, the product can be processed as usual. If you continue to experience any issues please call us at [phone]. We are here to assist you. Team EPODEX

[@Unidentified952]

This is cool! Do you have any recommendations for inexpensive resin? I’m trying to find something small I can use for crafts but everything’s $40 or higher :Ϸ Thank you in advance

[@epodex-uk3877]

Hello, Thanks for your interest! What are the measurements of your project? Length, Width, and Depth? I can see what we can offer you :) TEAM EPODEX

[@Unidentified952]

@@epodex-uk3877 Hmmm… I’d say no larger than 1 1/2 (one and a half) inches, length and width. Probably pretty thin, but thick enough to fit a small cut piece of paper, maybe an inch or so depth. Small but big enough to use for a charm to wear on a necklace or something similar? Would that work?