How To - Change a pin code on a BT electric powered pallet truck

[@scormont5831]

Hello, can you tell me where to cet a can Key please?

[@1600GSI]

On the right side under the cover above the relays. a round 4-pin connector.

[@stephenrawle3013]

hi, i have a staxio, fitted a new card in tiller, and nothing works, test comes up on screen , any ideas thanks in advance

[@1600GSI]

You need to program the software into it. A new card dont have software.

[@edgardoturalde-ul9lv]

I forget my pin code...what to do

[@1600GSI]

You need a CAN-key to insert it in the diagnostic socket. Press and hold the horn button. Press 1 then the green on the keypad. Use the accelerator to scroll to parameter 10. Release the accelerator. There is the actual pincode. To change it, tap the horn button 1 time. The value is flashing. Change the value with the accelerator, and press the horn button to safe the value. Logout using the red button on the keypad. Disconnect the CAN-key. Wait for approx 1 minute. Try your new pincode and leave a comment here below.

[@edgardoturalde-ul9lv]

@@1600GSI i need a CAN KEY

[@zzxxzz2023]

My machine It's very slow right now. I want to know how to set it up.

[@1600GSI]

I will make a video how to adjust the speed settings on a BT powered pallettruck.

[@juanpablooliverosgaviria4158]

Buena te hago una pregunta como puedo calibra el freno

[@1600GSI]

please refer to the repair manual

[@AlejandroSanchez-j6d]

Buenos días me podrías apoyar tengo un código c68 no se que indica no tengo scaner

[@1600GSI]

Check out this video with the description of the BT error codes: kzbin.info/www/bejne/Y6Wllnt-l7t7haM

[@stablinio12]

Hi, I need your help. I have toyota levio lwe160. Deafult pin is 1258. I need pin2 and pin3 for other users, where can i find it? Do you know deafult pin2 and pin3? I dont have can-key, i can only open param to change speed and others.

[@muhammedaydemir6256]

2258 3258

[@gregorigarcia8590]

Hello, where do I get the scanner for that computer? It has one that doesn't do anything to me, it just gives me multiple errors when I turn it on.

[@1600GSI]

TVH.com Intellaliftparts.com

[@piarasinghdharni6981]

Hi can you tell me where did you get the Can-key from?

[@1600GSI]

U can try www.TVH.com

[@ralphkeefover4094]

7BWS talkie error code C28

[@1600GSI]

Check out my channel, and this playlist: Toyota BT Industrial and Warehouse Equipment | Playlist: kzbin.info/aero/PLyeFIy5Sf4iP3OV_S-hO8edz8ca0-5fiF

[@ET-zr1dy]

What is error code 2.52

[@1600GSI]

Wich model? And model year? C code or E code otherwise its 4 digits

[@1600GSI]

kzbin.info/www/bejne/o3e9kJqXdpZ6e9E

[@ET-zr1dy]

SWE 140 MANUFACTURED 2018-04

[@1600GSI]

Must be a four digit error code like 2:520 or 2:521 Possible causes: tillerswitch malfunction, main contactor sticky, battery voltage low, or software related issue.

[@ET-zr1dy]

The technician told me to replace logic card..

[@Helikopterpop]

That looked complicated