Anti seize should be applied to the center ring and the wheel center hole. Remove rust with a steel brush and sand paper, clean with acetone, both on the rusty center ring and in the wheel center. Do NOT apply anti-seize on the bolts, or they may loosen while you drive. You can also apply a thin film of motor oil, if you do not have Anti seize at hand.
@IgorD335 күн бұрын
Are you using oem bolts for both set of rims
@RiqardA Жыл бұрын
Thanks for this great video, what brand anti seize did you use? thanks!
@anthonypaddayuman33154 ай бұрын
Where did you buy that set of jack stand?
@biddytyt5977 Жыл бұрын
Kindly send the names of all the tools you used here. Possibly the link to purchase each tool
@tharithchum6707 Жыл бұрын
Can you include the link of your jack rennstand ?
@Mulovita Жыл бұрын
Do you need separate bolts for winter tires or you can use same ones used with all season tires?
@POGAuto Жыл бұрын
Depending on your wheels and car. For this I have to use other bolts but for my Tesla with different wheels the same oem lug nuts works. I would suggest contacting a tire shop to make sure
@coffeepot31236 ай бұрын
Guys you don't need all this gear just to change tires at home. You only need the hand tools and a car jack, you don't need plastic blocks behind the wheels either if you just lift the handbrake, the rear tires are locked, and you put the car in gear/park mode, you only ever change one tire at a time so you have three tires on the ground at all times which is safe. Lastly no need for a jack stand here, use car jack and pump it up just enough so that the tire leaves the ground.
@robduivis51032 жыл бұрын
Hi, where did you buy the jack and the jacking set with the adapter, mounting plates etc., like to have this set to ligt my GLA.
@POGAuto2 жыл бұрын
I got the Jack from costco and the jack stands from safe jacks website
@natureb4life9642 жыл бұрын
@@POGAuto great info btw. Where would you place the jack stands if you were using a different Jack. If you place the Jack on the rubber ?
@EminChatzi Жыл бұрын
hello i would like to buy the jack base with positioning blocks
@erikdecastro30512 жыл бұрын
What size did u use for the lugs? Was it 17
@jaimeramos2012 жыл бұрын
I recently bought the rennstand with the Mercedes adapter but I am hesitant because it is not a exact fit. Do you have any issues with your adapter?
@POGAuto2 жыл бұрын
I also believe it is not an exact fit but I did not have issues with it.
@jaimeramos2012 жыл бұрын
Thanks for the quick response.
@MarkkimaniUSA3 жыл бұрын
Hi bro i have a question. I normally see that canada 🇨🇦 you are not allowed to have tint on ur two fron windows. It should allow 70% light. But all ur cars have tint. Is it optional now???
@willymercedes40683 жыл бұрын
depends which province. Some provinces allow u to put a legal tint which is 35% that is still dark but still see through which cops can see u.
@MarkkimaniUSA3 жыл бұрын
@@willymercedes4068 oh i get u… which province allows u put tint on the front windows? Name them kindly
@willymercedes40683 жыл бұрын
@@MarkkimaniUSA not sure about all but where I am in Ontario legal tint limit is 35%
@MarkkimaniUSA3 жыл бұрын
@@willymercedes4068 okay 👍 thats good 35% is good. 70% is too clear
@willymercedes40683 жыл бұрын
why doesn’t ur white GLC have any tints ?
@POGAuto3 жыл бұрын
My dad had a very bad experience because of driving my car
@MrRoyGuy2 жыл бұрын
Do you know if this car will fit 18" rims?
@POGAuto2 жыл бұрын
I would not recommend it since even with 19s it was hard to find wheels that would clear the front big callipers. In fact these callipers were damaged and the tire shop had to pay to get them replaced you can find the video in the chanbel
@MrRoyGuy2 жыл бұрын
@@POGAuto Thanks for the quick reply. I have 19 model with night package and those calipers are indeed huge. I will go with the 19" just in case! Thanks
@enri74cv Жыл бұрын
What is the lugnut size?
@POGAuto Жыл бұрын
If I remember correctly 17mm
@1grimeystain2516 ай бұрын
broo how is your wheel just coming right off 😂
@POGAuto6 ай бұрын
Its always easy like that
@supremecarnage50713 жыл бұрын
👍
@cliveneilands1449 Жыл бұрын
A little misleading in the title of this video. Changing a tyre is actually removing it from the rim. The title should of been "how to change wheels". The tyre is just the rubber part while the wheel is the tyre and rim combined.
@POGAuto Жыл бұрын
Please get your facts together, even booking a appointment at a tire shop for a change like I showed in this video the tire company booking calls it tire change with their own wheels. I wonder what would you call a tire rotation then. Oh i think Wheel replacement. Please don’t call my video misleading when you have a different opinion of how things are called today.
@cliveneilands1449 Жыл бұрын
@POGAuto I guess it's how bad Americans or Canadians speak English. I stand by that your video is misleading. If you can't take criticism then turn your comments off.