Thanks i was about to buy new dolly now don't need to spend my money
@Aliencoochie2 жыл бұрын
Instead of the lock washer I used dorman help quick connect hose clamp, makes it easier for next time you need to change wheels
@scottiemanners2 жыл бұрын
I ended up using a cheap assortment pack of E-Clips from harbor freight. I think I paid $5 for the whole pack of em. There is a good size in there that I was able to use on the axle with pushing it down with socket and hammer
@DanTheManNetwork2 жыл бұрын
We make it work
@alfredstanley48792 жыл бұрын
I wish I had watched before ordering replacement wheels from Amazon. Harbor Freight 10" wheels are definitely a better deal. It seems really weird that push nuts can't be obtained locally, but I sure can't find them. I think that I'll purchase an 8-pack from Amazon, though, for $8.99 rather than two for $5.20.
@DanTheManNetwork2 жыл бұрын
I found out you can get wheels in home depot comes with push nut to but little pricey around $30 I think. Thank you for watching.
@robrobski94454 жыл бұрын
Good to see it i just need to change 2 my wheels looks easy
@kacynash4 жыл бұрын
WOW thanks for the info. Not only on the how but where to get the necessary stuff. I think maybe even I could do it with your info.
@Ricovette4 жыл бұрын
Thanks for this upload Dan... Thumbs up from me... Stay safe... Rico
@DanTheManNetwork4 жыл бұрын
Thanks. I'm glad it helped
@PhilLee584 жыл бұрын
Thanks...now off to Amazon to get the PUSH NUT
@65csx834 жыл бұрын
Push nuts vary in style. I've always removed them carefully and reused them. If you understand how they work, you can figure out how to remove and reuse them. I've found them sold at hardware, craft, and auto parts stores .
@NINJA14422 жыл бұрын
This should not be that complicated
@DanTheManNetwork2 жыл бұрын
Easy enjoy
@apmorales7187 Жыл бұрын
Gracias por tus video amigo
@DanTheManNetwork Жыл бұрын
De nada amigo
@icyborg6065 Жыл бұрын
shouldn't you put a washer before inserting the push nut? I noticed on mine it has 2 washers and 1 push nuts per tire.
@Sergio-gm4gv2 жыл бұрын
Awesome video bro , thanks
@DanTheManNetwork2 жыл бұрын
You welcome
@Planespotterdude2 жыл бұрын
Wd 40
@randyclar7474 жыл бұрын
Hay man, thanks. I am a mover. I live in a small town. I was forced to buy the junk that is at home depot. The wheels I got have same initial device holding in. The wheels are real wobbly. It is driving me nuts. I sent you a like and subscribed; because I am surprised there is a video out there like this. That initial nut I could not figure out how to remove....now I know. I noticed the wheel you replaced on dolly is wobbly too. How can you stand to move a dolly with heavy stuff on it; and it goes every which way? It is like a dolly on liter of everclear with those type wheels; and set up. Now you know what I go through, and thank you again sir.
@DanTheManNetwork4 жыл бұрын
You welcome, yes they get wobbly quick have to replace them often if you use it alot, good luck
@randyclar7474 жыл бұрын
@@DanTheManNetwork Looks like the new wheels you installed were wobbly. I don't get it, that part of it. I am trying to get out of the wobbly dolly syndrome that is commonly occurring. Any advice? This can be a problem when going down a narrow ramp on truck with heavy refrigerator on your dolly on everclear, for real. I need help bro. I sent you a like and subscribed; for I was really surprised someone thought of this. I am a follower now of you Dan the man.
@DanTheManNetwork4 жыл бұрын
@@randyclar747 for now when ever gets bad i just keep replacing them
@biggerscranerealestategroup Жыл бұрын
Are all dolly wheels the same size? I need to order replacements.
@Beh0ldas0n4 жыл бұрын
YEA! I could not get off the pinch nut ima try to crack it. Thanks only helpful video for this
@DanTheManNetwork4 жыл бұрын
U welcome
@edlopez8543 жыл бұрын
thank you very much for the info.
@DanTheManNetwork3 жыл бұрын
You welcome
@fatdiesel443 жыл бұрын
$6 for a push nut sounds expensive (at least to me). Maybe this tip will help. I just cut a slit in the nut and pryed it off and reused it. The slit is enough to release it, but not so bad that it couldn't still hold again. Now if you are in a commercial or critical use application you may want to go for the new one. Just trying to help. Thank you for posting it was a big help to me.
@hollywood57033 жыл бұрын
Isn't there a tube inside that can be inflated
@DanTheManNetwork3 жыл бұрын
Yes there is a tube inside
@hollywood57033 жыл бұрын
@@DanTheManNetwork I just pumped up my 2 flat dolly tubes. I knew they weren’t bad; just sitting too long.
@DanTheManNetwork3 жыл бұрын
@@hollywood5703 yes over time that happens
@barrydouthitt53424 жыл бұрын
My caps came off easy with a small pry bar. Had trouble with the new push nut until I watched you do it with a socket. So simple . Thanks
@DanTheManNetwork4 жыл бұрын
I'm glad you got it. Thanks
@stephannichols28236 ай бұрын
What size socket?
@JOlender4 жыл бұрын
Buddy why go through all the trouble of buying and looking for a push nut? Drill a 1/8's hole through the stock and insert a cotter pin. It's not rocket science but you make it complicated; keep it simple.
@DanTheManNetwork4 жыл бұрын
Some people can't use power tools simple
@RZ-eu2rl4 жыл бұрын
Seems like you could also use a screw tightening hose clamp and washer.
@JRScar-dq1ex4 жыл бұрын
@J Olender - dont worry about it - why you watching troll