How to Change ABS Wheel Sensor on a Jeep JK

[@albundy7459]

Mine went out at least a year ago, but I’ve ignored it since I have a standard. It’s messing with my brakes pretty bad now and I never knew how easy it was to fix. Thank you for the video. It’s a huge help.

[@MajorWeakness]

Glad it helped!

[@itcanwait]

Sir, thank you so much for putting in the time & energy to make this video. I replaced my entire brake setup, front and rear over the last year or so, because of this exact problem not being solved in the first place, thus the brakes got ruined. Finally after much research, we found out about the sensor issue. Your knowledge thoroughly explaining what is wrong, why and then how to fix it, is top notch. Many thanks.

[@MajorWeakness]

Glad it helped. Thanks for the kind words

[@TiredandSleepy]

Excellent video, love the depth of detail. I found you by looking for a tutorial of the HF OBDII reader, and you have completely convinced me to pull the trigger on that purchase. Thank you.

[@MajorWeakness]

Thank you for the kind comments. I'm glad the video helped

[@shrapn3lxo910]

Thank you so much for the info. I was not just looking for a tutorial, but also looking for a diagnostic tool that would allow me to see the codes. Keep it up :) Learned plenty!!

[@MajorWeakness]

Thank you glad it helped

[@louisianaguy2661]

Good video, thanks. My rear driver side sensor went out today so I will be replacing it this weekend.

[@MajorWeakness]

Glad it helped

[@donaldmcphail1078]

Made it easy to see and understand.

[@MajorWeakness]

Glad it helped

[@41maddriver]

Confirmed Tuesday 8am

[@robertwollner7127]

I’m having the same problem, thanks for the tutorial!

[@MajorWeakness]

You’re welcome, hopefully it helps you fix it!

[@robertwollner7127]

@ yep abs light went out, I had to take it for a drive. The plastic safe lubricant helped with lock, I’ll use it next time Thanks again

[@danhambrick6331]

Nicely done Major.Hope you and your family have a Merry Christmas.😁

[@MajorWeakness]

Thank you. Same to you!

[@slynnish]

Thank you for this informative video. Since this video is a year old, how is Duralast sensor is holding up?

[@MajorWeakness]

Still working great never had a problem

[@josephemerson2893]

Thx a ton really helped

[@MajorWeakness]

Glad it helped

[@veesoho93]

Very helpfull thank you!

[@MajorWeakness]

Glad it helped

[@swervingfish05]

I have a 2017 jk my ABS and Traction Control light turn on a few seconds after turning on the car then about half a minute or so it goes away, all my seals and hubs seems ok i just got the front Axle seals done, my guess is a faulty sensor.

[@MajorWeakness]

That would be my guess. Try a scan Tool with ABS feature

[@waynedavis2238]

Thank you so much !!

[@MajorWeakness]

You are welcome

[@solostruggle]

Nice video sir

[@MajorWeakness]

Thanks

[@Daveinet]

How come every one of these videos that show replacing the sensor, it is always the left rear wheel?? My left rear is also not reading. Is it because that is the side the exhaust is on?

[@MajorWeakness]

That's a very good question! Not sure but with the added heat of the exhaust it might be a contributing factor indeed!

[@markvanalstine455]

Mine is passenger side rear but nonetheless needs replacement

[@girlgolden8491]

Groovy bright head light 🤔

[@jasonquivey9627]

I went to pull mine out and noticed it was broken in half the other end fell inside so now what do I do and why was it broken

[@MajorWeakness]

No big deal if it fell inside. Just put another one on.

[@maeghanelysefields]

Drop the link to your hoodie, major

[@MajorWeakness]

www.jcpenney.com/p/victory-fleece-lined-denim-jacket-with-hood/ppr5007719032?pTmplType=regular&country=US&currency=USD&selectedSKUId=51890450083&selectedLotId=5189045&fromBag=true&Denim%20Jackets&cid=cse%7Cgoogle%7CMens%7cDenim%20Jackets_51890450083&kwid=productads-adType%5EPLA&gclid=CjwKCAiA3pugBhAwEiwAWFzwdc-AQAuRdmjck7S0GRpttti7VkI5oCBlcCYifYlg7Rc4_0vkm8K00RoCTMEQAvD_BwE&gclsrc=aw.ds

[@Nif117]

Can you replace this with the wheel still on?

[@MajorWeakness]

Probably

[@jeffreebailey4464]

My sensor arrived today from RockAuto and I'm looking at it thinking I can probably do it without removing the rear wheel..

[@jeffreebailey4464]

​@@MajorWeakness PS I really appreciate your vid on this though!

[@massivesnarkfish]

Are front and rear sensors the same?

[@MajorWeakness]

No they are different

[@CheeseGOATED]

Anyway my mechanic could have knocked out speed sensor. When greasing the bushings

[@MajorWeakness]

It is possible

[@CheeseGOATED]

@@MajorWeakness thank you. For your reply. The mechanic says he didnt but awful big coincidence when I started my car I had abs ebass 4,wd etc lights on for first time

[@CheeseGOATED]

Am.i wrong to think that mechanic may have knocked it out however it was close to being broken anyway if it was that delicate ? Thank you in advance

[@CheeseGOATED]

The issue has been fixed and they said they replaced speed sensor just trying to figure out what *edit. Happened?

[@CheeseGOATED]

Jeep liberty if that matters

[@tylermills8135]

Anyone have any idea why the sensor wouldn’t go back in on mine?

[@MajorWeakness]

Bent? Or something obstructing the hole

[@jeffreebailey4464]

Yeah you've got a wiggly it a little bit and always remember to hold your tongue just right😅

[@Znet66]

what difference if they are made in Mexico ? why don't you get a OEM and pay three times

[@MajorWeakness]

People like to know the source of manufacturing. Some people like to purchase certain items based on this. Cant blame me as I purchased but some would now. Just want people to make an informed purchasing decision

[@jeffreebailey4464]

​@@MajorWeaknessit's probably manufactured at the same Mexican makeeladora, they just put in a different box!

[@RogerJG21]

I wanted to ask about the BFGoodrich wiper blades are they worth it?

[@MajorWeakness]

Yes if you drive in mud and need to use with muddy windows. If not then save a little and go with the Bosch Icons

[@RogerJG21]

@@MajorWeakness thanks that's what thought, I got a set of Bosch Icons