Thanks, ESPECIALLY the instruction not to take the screw out completely, but to use the screw to push the wee clamp to the side
@shimonbain2 жыл бұрын
My engine is running hot, I changed radiator and water pump. Do I change head gasket next?
@gerardmichaltoner39565 жыл бұрын
Could you do a video on glow plug replacemen please
@wounded2018 Жыл бұрын
I have the same car ... Can you explain how to replace the PCV valve? Actually I don't know its place in the engine
@Theo-c2p Жыл бұрын
Hi, I tried to remove the injector n1 but the head of the injector plug(where to unscrew the injector) broke, any suggestion how can I remove it? Thanks
@bernardmireku7994 ай бұрын
I have changed injectors on my 2004 model but its hard to start
@ahmadali-xq1xe3 жыл бұрын
My dear brother, your favorite has such an engine in a Tucson car. When I stomp on the fuel, it does not respond. If you stop the engine then restart it, and when I tread the fuel again, you will start responding and then the engine suddenly stops working. Agok, tell me the problem
@Dracjuegosymas3 жыл бұрын
What year is the car?
@ahmadali-xq1xe3 жыл бұрын
@@Dracjuegosymas 2006
@Dracjuegosymas3 жыл бұрын
@@ahmadali-xq1xeit might be a problem with the throttle body, some of those engenies have them installed, it is installed on the intake manifold, it can make the car stop, when it stops how does it do it?, when you accelerate the engenie does it try to or not at all?, did it go slowly or did the problem suddenly apear? before trying anything i would recomend disconnecting the batery for 30 minutes, I do not think it will do much but it might fix it, has someone worked on the car recenty? Sorry if i don't have the best English
@PeterEvans-e8o Жыл бұрын
If I took the srew all the way out that is holding the injector in place how do I get back in so it will be good.?
@huzek272 Жыл бұрын
you can use magnet and screw it a little
@kevinRealAmunRa21602 жыл бұрын
hello can you tell me the part num of the diesel injector of that model in the video because i need to buy a set injectors and i dont have the part num s maybe what was on my vechile was no original
@raymondroyo73774 жыл бұрын
.that kind of engine sir..can udjust the valve of that engine?
@sudeshs6 жыл бұрын
what did you use to actually pull the injector out? An injector puller, pry bar, needle nose pliers?
@titiserena3583 жыл бұрын
Bonjour pourrais-tu me dire si tu as une vidéo de démontage du collecteur d'admission merci beaucoup
@TechnicalSkillKnowledge3 жыл бұрын
Please upload full video
@shimonbain Жыл бұрын
I cant remove one of my injectors. It spins but doesn't pops up
@alitarek69155 жыл бұрын
Thanks for Very useful information. Wish you best
@shimonbain6 жыл бұрын
I have the same engine and it is spilling fuel on top of the engine, what seals do i change?
@huzek2726 жыл бұрын
Where is the fuel coming from? If it is on the return check the small o rings on the top of injectors and fuel return lines but if it is coming from the injectors you have take them to specialist
@chopochuchay89762 жыл бұрын
Why did u change your fuel injector sir.
@huzek2722 жыл бұрын
changing coper seals...
@KongnyuyMisharck10 ай бұрын
How to chekck a deisel ram
@bravejohnley55393 жыл бұрын
My Question is , if your change the injector , like I put an other one , if is important to reprogram the injector for the ECM to know the new I put.
@huzek2723 жыл бұрын
it runs smoother when you program it but isn't mandatory
@shimonbain5 жыл бұрын
I have the same vehicle and I want to change my turbocharger do I get the 28231 27000 or the 28231 27400?
@robydany87495 жыл бұрын
get the one with same code as the one from your car
@AndysAverageAdventures3 жыл бұрын
Do these need to be programmed afterwards?
@w1cked1337 Жыл бұрын
Yes
@vitojejo5 жыл бұрын
is necessary to code the injectors when you replace them with new ones?
@dmitritkachenko11785 жыл бұрын
Yes. Need the OBD machine
@robydany87495 жыл бұрын
@@dmitritkachenko1178 are you sure? People change injectors on these cars with others from donor engines and don't code anything.
@dmitritkachenko11785 жыл бұрын
Yes. Unless the diesel mechanic lied to me.
@robydany87495 жыл бұрын
@@dmitritkachenko1178 i put 4 injectors from other engine and i did not code anything and works perfect.
@dmitritkachenko11785 жыл бұрын
www.techtalk.ie/technical_articles/common-rail-injector-coding/ You have the older model?
@nihonggo28435 жыл бұрын
Awsome.. Now i know how to get that now..
@thechileansclinic5 жыл бұрын
Gracias buena explicacion.
@barber.florin.u.l.m31304 жыл бұрын
How the f¥ck do i put the injector back in afgani?
@dededada15103 жыл бұрын
Merci
@miloskalnicky28593 жыл бұрын
So you actually show nothing my friend....
@ЮрийЛопатин-г6л3 жыл бұрын
С таким акцентом может говорить только русский.
@dawidwojtaldw6 жыл бұрын
Yyyyyyy,yyyyyyy,yyyyyyyy,yyyyyyy ya ya you 🤣
@shimonbain2 жыл бұрын
My engine is running hot, I changed radiator and water pump. Do I change head gasket next?