How to Change Engine and Hydrostatic Oil On The John Deere 4066R

How I change engine oil, and Service the Hydrostatic Transmission.
Chapters
0:00 Intro
2:06 Removing paneling
3:58 Over looking the tractor
7:32 Reinstalling the engine oil drain plug
8:56 Removing oil filter
9:57 cutting oil filter open
13:06 Reinstalling engine oil filter
14:33 Oil filling
15:18 Engine start
17:09 Prepping the tractor for Trans oil drain
18:10 Draining the Hydrostatic Transmission
21:25 Removing Transmission filters
25:28 Installing new filters
27:28 Cutting filters open
30:47 Filling the Transmission
34:18 Conclusion

[@MrRdparri56]

Great video, I'm appreciative! Among other things:(1) I like that you showed how to remove the front grille, that will make cleaning the cooling systems a little easier. (2) Giving the sizes of the wrenches, for those of us that purchased one of these big machine, it's great to buy the right sizes before you start and not be required to make so many trips to the city for the bigger tools not in the toolbox, like the 30mm socket for the Hydraulic Oil drain plug. (3) The way you worked through things like opting to retain the Top Link Hanger for the protection of the Hydraulic Oil Filler cap. Please keep the stream of information coming, Thanks

[@gillpecceuservices]

I'm glad you liked the video. Thanks for watching. Aloha.

[@ronaldharmon9891]

"OSHA approve"🤣 #HappyNewYear Gill🥳

[@balonkysnacker8797]

What year is your tractor if I may ask? Your videos are very informative.

[@gillpecceuservices]

It's a 2019 model.

[@balonkysnacker8797]

@@gillpecceuservices I have the 2021 model. I do not like the lever that controls the rock three-point Hitch. I certainly like yours better. I have just one lover for the rock arms and controls the up and down for the bush hog Mx6. The problem we’ve been having is that it’s very unstable. But I took the back right tire off and reset the lever arm, it has spine gears so it wasn’t too bad. I’m getting Lyft now right away. The reason why it was unstable is because the light that holds the leveler arm was too loose. I guess so I believe that should solve the problem.. I had someone buy this tractor for me, so I am still learning it myself. It has about 500 hours and I bought it when I had around 250 hours. I’m the three-point Hitch the top is a hydraulic cylinder and not a turnbuckle.. I don’t know how to operate it or where the buttons would be or did it ever work? Is there something you could help me with?

[@gillpecceuservices]

@@balonkysnacker8797 I can help if you need.