How to Change Oil and Filter Toyota Tacoma V6 3.5L 2016-2023 | EASY!

[@garymurt9112]

While it wasn't difficult to change the oil on my tacoma, it was probably the most difficult oil change I've ever done. I've changed oil for over 30 years from lawnmowers, pickups, farm tractors and dads fleet of 18 wheelers. I definitely prefer a spin on oil filter.

[@ponolovefarms3926]

Same. And just had the plastic housing crack on me. When buying a new one, the parts guy said every tech up there has broken several.

[@jesusnavarrete6317]

I think it's the pressure. The small replaceable filters is the only perk other than that it sucks.

[@SpineShank7]

My sister's drain plug fell out of her car on the freeway after a Subaru tech failed to use a torque wrench when tightening it (caught on camera, so Subaru covered the engine replacement). So while 30ft lbs might seem like a lot, I would always recommend following the manufacturer's torque specs as well as you can. Otherwise, this is a really nice, clear instructional video! Super helpful to see where everything is before you crawl under a vehicle.

[@MasonLagz]

@XxgunsxX1 yeah man i never used a torqe wrench only hand tight and that never happened to me they much of tighten it one thread

[@benvandyk3427]

That filter setup was definitely made by an engineer... Exceptionally difficult. The 2nd gen had it right up front in the perfect place

[@RandomCaliforniaAdventure]

Really? Compared to my 1 gen Tacoma (two) I feel like this gen is amazingly EAZY to do.

[@lobsterbisque7567]

Knowing how to change Your own oil & filter is priceless. Having owned only used cars since I started driving 25yrs ago, I can hoenstly say that taking the time to change Your own oil has saved me a ton of time in the repair shop, money, and headaches. Having worked at an oil change facility & changed the oil on my friends cars has been eye opening and sad how many ppl neglect the oil change intervals on their vehicles. Too many times have I seen sludge built up in the oil filter once its been removed. My father taught me that it's better to run the cheap oil & filter in shorter intervals than to try and go past 5k mi/interval. All oil breaks down, even if the car has been sitting. And ppl often times do not take into account how their driving habits affect the change interval as well. As lifelong toyota fan, my hat goes off to toyota not only for their engineering, but making the oil changes easier with simple things such as oil filter placement in most of their cars & trucks. It may be dirty & inconvenient at times, but the knowledge you gain being a bit more involved with your vehicle is priceless! But that's just me, I find an odd satisfaction in changing my own oil. Also, doing a simple drain & fill(if Your A/T has a drain plug) on your automatic transission fluid every 10k-15k mi. goes a long way to keeping your car running. It does take a bit of research(the right kind of ATF & how much new ATF to replace the old fluid with is paramount) but worth it as well. Instead of a pressurized Transmission flush, use the honda method: drain & fill every 100-200mi, 3 times. It may be a bit wasteful, but it has worked wonders for every make & model that I've owned that had a transmission drain plug.

[@2carpros]

True! Thanks for watching!

[@thomas21991]

Great video! I just changed mine for the first time at 5k miles. I noticed the smaller o ring on the oil filter was missing 😮. Surprising that it came from the factory that way.

[@danielnation9123]

Thank you, very helpful going to do my first oil change on my Tacoma. Dealer did the first two. I’m gonna take it from here.

[@2carpros]

Right on! You got this! Thanks for watching!

[@kiddneybeans]

Very simple straight to the point video I just bought a Tacoma and gonna change the oil just because I like knowing it’s changed from the lot and I had no idea it would be this complex

[@lawdawg5823]

When I did my first oil change I swapped out that plastic oil filter housing for an aluminum one. Good upgrade I think.

[@boe3421]

Excellent demo. I could easily see every step. Great lighting! Thank you.

[@2carpros]

Thanks for watching!

[@---rg1gb]

What's up with that metal tab 9'oclock position (time @6:25)?....it seems to get in the way of removal and replacement each time. Is there some way to move it....seems stuck on there pretty good

[@typ87]

I think it's there to prevent the filter housing from walking off if you don't tighten it all the way. It hits those ribs/tabs. On my wife's corolla with a similar design it does a little more to stop it from backing out and I had to hold the tab out of the way to get it started. Kind of a nice peace of mind feature.

[@Firesealb99]

Thanks for the video and links and all the info! I've always changed my own oil and was surprised at the complexity!

[@2carpros]

Nice work! Thanks for watching!

[@TheDeerhunter42]

best tacoma oil change on youtube thanks

[@cuttheknot4781]

WARNING: Use only Toyota OEM Filters/Parts. Yes, you pay more but it's designed that way for a reason. That ACDelco filter creates too much pressure and has less filtering material, as well. Buy Toyota OEM parts. Also, change your oil every 3-4 thousand miles and ignore all of the BS about 7-10K miles. Just ask an honest mechanic.

[@TysonMike-c5u]

Yea because they just dumped good oil out, looked brand new, how about check your oil every 3,000 miles and 1,000 miles after once it starts to turn darker NOT black change the oil. These trucks are meant to be ran hard.

[@BuddyWestside]

Isn’t synthetic oil meant to last longer than regular oil, which is why it costs a little more than the regular? No way I’m changing every 3k miles, 5k-6k yes, but nothing less or more than that.

[@JebemTiZivot]

@@BuddyWestsideYeah 3k is excessive, 4k is the lowest I would consider but yeah I think the guidelines are 4-5k for regular and up to 10k miles for synthetic

[@jesusnavarrete6317]

Mine is black every 4000. Especially if you work in dirt roads.

[@P00RKN00W]

I found the ase certified master tech guys!!!!

[@mebebrb]

Video definitely helped. Having two of the skid plate bolts break off and having to put a cheater bar on my breaker bar to get the oil filter cover off kinda sucked. Oil’s changed but there’s still work to do. Covering resetting the maint required would have been appreciated

[@BerettaStoned]

Thanks man. I purchased my truck in march of 2023 and took it in for “scheduled maintenance” around 6k something miles. I had just watched a video saying the oil on Tacomas should be changed every 5k miles, so I thought they would for sure be changing my oil on my first service appt. Then they tell me that it doesn’t need an oil change until February 13 of 2024 🤦‍♂️. I thought that was strange and most of the people I know thought the same as me. I’m now at 8,715 miles and still no oil change til next year February. Idk why but I feel like it’s a way to get people to have problems and end up buying another vehicle. So after watching this I’m definitely changing my oil for piece of mind next weeks paycheck.

[@2carpros]

That's what I think of too. Thanks for watching!

[@RandomCaliforniaAdventure]

The newer Tacoma from what I can see is that the oil is thin and thus explains the whole new "OW-20" oil. Even if you ran 5k or even 8k depending on how you drive day to day. The oil friction shouldn't change much but your Tacoma will definitely be burning oil. Try this on your next drive...once you come home, go ahead and open that "oil cap". Notice anything funny? Yeah that your oil burning and causing smoke when you go too long between interval. The new trucks are meant to run full synthetic and so when you go for a "regular" oil change you are still getting "full synthetic" and when you request for "synthetic" oil, all they did was just up your charge for the same thing...lol. In order for the truck's of today to run at the efficiency that they are supposed to...most if not all run on synthetic over conventional oil. If I was you, go ahead and change up the oil right away! For my older Tacoma 2000 and 2003, I run a thicker oil because at 250,000...I can't run the same original oil because my engine has been worn down over time thus needing thicker oil that doesn't slip in between anything.

[@BerettaStoned]

@@RandomCaliforniaAdventure I appreciate the information bro 👊🤙 I will try that tip on opening the oil cap when I get home today 🙏

[@garymurt9112]

Just remember, car dealers are about selling cars, not oil changes

[@zachouch1315]

I thought oil is changed at mileage intervals not on certain dates. Strange... 🤔

[@mikekennedy3173]

Good video Just curious what kind of torque wrench do you recommend for the 18 ft lbs probably 3/8 drive??? Thanks again,

[@roomservicetaco]

Thanks for the video - especially sharing torque specs. One question - how do you reset the maintenance notification on the dashboard after you've changed the oil?

[@bogballzzzz5643]

it resets after driving a certain number of miles. i don’t know how many for the tacoma but you can look it up

[@roomservicetaco]

@@bogballzzzz5643 ok, many thanks. I also found a reset button scrolling through the screens on the dashboard.

[@garyt7830]

At 6:27 in Your Video,,, you show a Oil Filter Wrench Tool totally different then your description , It looks like some of the FLUTES are essentially Sloted for the Top of the Oil Filter Assembly ! . Your description shows a Tool without any 3 SLOTed Gaps . so this makes it hard for which to purchase or it makes a Difference ! Here is One Description on Amazon of one : The oil filter wrench for toyota is 3/8'' Drive, 64 mm Inner Diameter with 14 flutes for a snug no-play, no-slip fit. There are 4 slots on the bottom edge, which are mated perfectly with Toyota 15620-31060 oil filter cover and help prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner

[@2carpros]

Yes the one I linked works better. The one I used it cheap junk that I threw away and is known for breaking the housing. Thanks for watching!

[@charleyt4965]

so the filter wrench you used is different style than link?

[@TumbleWeed411]

Can you link the special washers with the rubber insert?

[@bubba.watercraftj7269]

Thank you for the video including torque specs. Guys like me are that fussy. I was a transmission builder years ago and now a retired medium/heavy truck mechanic. I found the owners manual stating the 2GR-FKS 3.5L engine requires 5.9 quarts without filter and 6.2 quarts with filter. I assume 6 quarts 6 ounces for comparison??

[@jody7865]

I saw that too. I guess 6 quarts works fine, all of the videos I have watched on changing the oil have used 6 quarts.

[@kerusso3568]

Hi, quick question, I just bought a 2021 SR5 6 cylinder, it doesn’t have the second panel that you took off from the bottom for the drain plug. Should I be concerned about not having that?

[@boston1450]

My 2023 trdSport doesn't either. Mine didn't come with one. Maybe they fell off 😅

[@gator7082]

SR 5’s do not come with that second skid plate.

[@ethanlanier4359]

Also for OEM toyota filters, Walmart sells a few of OEM toyota filters. The ones at dealer for my 2023 Tacoma are $6.00 and are actually cheaper than at Walmart for $7.54.😮

[@MAPAHaus5]

Great and excellent instructional video. Glad to see that. You made it very simple to follow for someone who is not an experienced mechanic. Glad to hear that. You're not the only one who is not worried about those exact torque measurement for tightening things. I too uses my feeling on how snug, they are and not over tightened.

[@hernimnimeisa9776]

Thank you for the great presentation on how to DIY your own vehicle to save you money.

[@2carpros]

You are welcome! That's why I'm here!

[@Brute750]

I do not have a lift. Can this be done on the ground? Thanks and great video.

[@2carpros]

Oh for sure! You don't even need a jack and stands. I can do it on the ground. Thanks for watching!

[@gilthethrill9179]

Why Castrol in the Tacoma? My '22 Tacoma SR v6 4x4 3.5L specs clearly specifies Mobile1.

[@2carpros]

Because Toyota signed a brand deal with Mobile 1. Mobile 1 is an amazing oil for sure but any other oil that's the correct viscosity, full synthetic, and a API Service rating of SN or higher will be just fine. Thanks for watching!

[@joaquinflores-rodriguez9145]

I liked your video man very well simple explanation thanks that will save me lot of time and money 💵 thanks man appreciate

[@mikebellmore4132]

Outstanding walk through video! Just subscribed and looking for Tacoma transfer case and transmission videos from your channel!

[@mikekennedy3173]

Great video. , I had my oil done for years at Toyota but the last one will be the last one. They cross threaded one of the front skid plate bolts when I decided to change out the faulted clutch fan that they failed to catch all of those oil changes conveniently after the 125,000 or 7 year warranty was up??? I approached them on this and was told the oil was my fault for driving on the road in 4 wheel drive ??????????? Thanks again, appreciate that

[@2carpros]

Oh man that's rough! I'm sorry to hear they did that to you. Thanks for watching Mike!

[@jody7865]

I really do not like the dealership (Hall Toyota Elizabeth City, NC) I bought my truck at. My free toyota oil changes are done and I will be doing everything else myself from here on out.

[@jesusavila629]

I use Castro as everyone seems to use it for Toyota but I use Mobile 1 oil filter or OEM both do the job and I still would use mobile 1 oil but I’ll just go with Castro edge

[@lincolnmarsh6404]

Humm interesting 5.9 qt? My 2017 Tacoma says in the manual 6.2qt my truck also has the V6 engine. Did Toyota change the capacity for 2023 Tacomas?

[@2carpros]

Maybe the 4x4 has a slightly different pan? That's why it always pays to check the dip stick. Thanks for watching!

[@miguelcortez7808]

Just bought everything in the description thank you for the video 🤙

[@2carpros]

Awesome! Thanks for watching!

[@zachouch1315]

It interesting that he goes through the trouble of spraying carburetor cleaner everywhere except in the canister which is exactly where contaminants congregate.😉And why not prime the filter/canister?

[@pache2112]

Excellent point!

[@danielm5620]

Almost 12 years later and Lavco is still teaching me

[@2carpros]

Daniel! Good to see you again my friend! Thanks for watching!

[@erk-1]

What do you think about using a little bit thicker oil or heavier oil like a 5W 40 or something like that?

[@pache2112]

That totally goes against what the Toyota engineers say. They say a different weight will work in emergencies but to be sure and change it back to 0w20 at next change!

[@2carpros]

Only if you live somewhere very hot. Otherwise I would follow the factory spec. Thanks for watching!

[@ericmao8131]

what's the name of the spray @8:42?

[@doalex2085]

I have a question 🙋‍♂️ ? Should you pre fill the oil filter ?

[@boonejones7373]

I cant get the oil filter housing off I have the right socket. I twist as hard as possible and can't get it to budge.

[@2carpros]

Nice work! It doesn't matter what order you go in. Thanks for watching!

[@calforman]

@@2carpros He Is asking about Oil Filter Housing Removal !!

[@LucianoAlfano8]

Your old oil looks like you drove 10 miles with it

[@brentivanrodriguez]

i guess it's a toyota thing, I've driven mine for 5k miles and it still looks great... but my infiniti q50 has been driven 3k miles and it's already looking dark

[@TheMichealFHansen]

@ 5:50 you show the filter drain. I had a 13 Venza and currently own a 12 Lexus RX 450h (same engine on both), and they have this. I have found it nearly IMPOSSIBLE to get the drain cap unscrewed without unscrewing the whole filter cap. And, once it's loosened, no way is that drain cap loosening. I've tried tightening the filter cap extra tight and then removing the cap - it never loosens for me. But I just end up with plenty of oil to drain from the filter. For anyone who experiences this, it's okay!

[@jody7865]

I could see that happening. Good info to know going into this. I will be doing this in about 1000 miles.

[@paullanghammer7444]

Good video, not sure about cleaner used, may damage paint and you.

[@Ha-fy6zv]

I just gave up on getting the skid plate off, it’s not possible without power tools

[@michaelparks7397]

just an FYI I think all Tacoma's have the front metal plate with the hooks. My 2020 SR5 4x4 has it but not the rear plate.

[@2carpros]

Interesting! Thanks for watching!

[@100Aces]

How about the oil life computer reset? Is there one? Apparently not?

[@reednichols2983]

Yeah, should be in your settings on the dash. Maintenance reset.

[@gustavopineda73]

How often should those o rings be replaced on the housing and the washer on the bolt to the oil drain?

[@coloradoboo1071]

Every time

[@2carpros]

Everytime. Thanks for watching!

[@boston1450]

Thank you for the links on tools & parts to do the job. Very helpful. Great video

[@2carpros]

Glad it was helpful!

[@danielbadiang3817]

Very helpful mahalo’s 🤙🏾

[@SixShooter-bk4oh]

What fun! I love little tune ups for vehicles.

[@leocosce4703]

You're a blessing, thanks for doing the parts finding as well

[@2carpros]

My pleasure!

[@AlanBeasley-yx5mf]

my 1967 Chevrolet had a canister all filter. I was complaining to my mechanic about how messy and time-consuming it was, and he advised me that for a few dollars you could get an adapter plate which bolted ion in place of the original canister, allowing the use of a simple spin on filter. Isn't it great the Toyota has now regressed us 57 years in automotive design! SMH changing my own all of us about the last maintenance I could do on my vehicles, looks like now I can't even do that. Thanks for nothing Toyota.

[@Gukworks]

Are you not getting a little brake cleaner in your engine? I ignore the oil filter drain plug... Just take the whole thing off and dump out.

[@2carpros]

Almost none. Thanks for watching!

[@TheKeyDateKid]

The owners manual says 6.2 quarts with filter. If you didn't change the filter, 5.9 quarts. Please clarify. Thanks!

[@2carpros]

I would always change the filter with the oil. Thanks for watching!

[@cofffeejoe2079]

Should you pre fill the oil filter like the non cartridge type?

[@haroldharwell7078]

Doesn't hurt to put some oil in the filter housing. Maybe 3/4 full.

[@paullopez3214]

great tips bro.

[@andrewriley7714]

So I put the damn extension on and it’s on so tight it won’t come off

[@Nate-jj1sn]

Thank you for this video

[@LMotrik]

Special socket 😂 the one I did thing was on there so tight the whole thing came out at the same time

[@zachouch1315]

That's because nobody takes it out except Ryan.

[@leeler2410]

Hey guy wish u lived next door- cause im fearful bout the filter but if u showed me once id be set - thanks 4 vid lisa k

[@pablolopez5504]

I like this dude!😉 you got a new subscriber!!

[@2carpros]

Awesome, thank you!

[@gabrielvelasco2986]

It’s about 60 bucks for me for oil and the dealership package is 300 for 3 oil changes but I’ll take that all day lol

[@2carpros]

Heck yes! Thanks for watching!

[@jody7865]

And when the dealer screws something up because they have some kid in there that doesn't care, they will send you on your way without telling you. It's not the cost for me, It's having it done right without something else being damaged.

[@KennethHall-pb7pr]

Good job. Thanks

[@2carpros]

No problem 👍

[@rrrttt1112]

What if you don't have a Lift, is this still doable at home?

[@2carpros]

Yeah totally. I don't even have to jack it up. I can just slide under. thanks for watching!

[@outsidethelines2162]

Great show!

[@whitetiger8652]

Great video.

[@ethanlanier4359]

So good tutorial but you should always thread in a bolt or lug nut on a vehicle first before tightening to rule out crossthreading. Then tighten to spec. Trust me, I had dealer crossthread bolt on my old belly plate on 1993 4Runner and when removing, the bolt, i could never thread a bolt back in ever again. I also had a shop once do the same thing on a lug once. I had to bust off lug nut and replace lug. Not a good time with either.

[@2carpros]

Good luck! You got this!

[@PianoUniverse]

The oil filter socket on Amazon says it wont fit my 23 Tacoma.

[@2carpros]

Do you not have the V6 maybe? Thanks for watching

[@PianoUniverse]

Yes, V6 3.5l@@2carpros

[@2carpros]

@@PianoUniverse Hmm I think amazon might have it wrong then. I use mine all the time on it and other Toyotas.

[@PianoUniverse]

Ok, good to know, thanks@@2carpros

[@pache2112]

I've had to stop trying to get name-brand stuff from Amazon because of all the counterfeits!! I would order one straight from Toyota!

[@g-bestman688]

Nice job bro✌️

[@2carpros]

Thanks for the visit!

[@michaeltammaro482]

Great video. Thank you.

[@2carpros]

Thank you!

[@twowheelgeriatric]

Unfortunately your link to the oil filter socket doesn't take one to the same style you used in the video. It takes one a cheap model.

[@2carpros]

I linked the 30 dollar made in USA socket. Not the cheap stamped steel one I used. The one used in the video is about 8 bucks and can snap off the tangs at the top of the housing. Thanks for watching!

[@twowheelgeriatric]

@@2carpros Okay, fair enough. Thanks

[@SMITT359]

Mistake. I would change engine at 5,000 miles, or every 6 months, which ever comes first, go over, you are pushing it. Engine oil is cheap, spin bearing, burn bearing is not!

[@2carpros]

That is the conclusion I came to. Thanks for watching!

[@cumeatsenergordon]

I'm currently at 20k miles and I'm doing the change tomorrow

[@QuinnMorgante-z6x]

Thanks

[@darrellmurray6671]

Should have shown how to reset your oil light

[@johnb1658]

Thanks for the video but you lost me with AC delco filter! You can clearly see the difference. Oe filters cost less than aftermarket. Go to a dealer a grab a bunch of them and you will have them on hand when needed.

[@2carpros]

AC delco makes quality parts. I would use them on any car or truck. Thanks for watching!

[@marcricher4727]

Toyota specs...5.9 liters of oil,(6.2quarts)

[@reggie2334able]

I have a 2023 and it takes 6.2 quarts

[@MrElvisr27]

You don't need to drain the oil filter.... Just take it down. The drain feature was made by an engineer trying to get rich.

[@2carpros]

Either way. Thanks for watching!

[@MrElvisr27]

@@2carpros np, the video was perfect don't get me wrong. I subscribed.

[@johnsailor3590]

i would use only factory oil.

[@2carpros]

As long as it's API SN and full synthetic and the correct viscosity. It's good to go. Thanks for watching!

[@lumity365]

Wait doesnt need 1 more quart of oil? You used a 5 quart container

[@nastysoda9212]

30ft lbs probably too much for that chinesium crush washer for sure. Stick to oem parts and specs plz

[@2carpros]

It's not the washer I'm worried about. 30 foot pounds on threads like seem like too much to me. But that's my opinion! Be careful or grip and rip to 30! Up to you.

[@brianrichard1768]

Don't do 8000 miles intervals. Sludge is the enemy of this engine. 5k max if you want it to last. Personally I do every 3k with Mobil 1. .

[@2carpros]

More is better, that is true. But 8k for most modern engines with full synthetic is good. 5K is what I do on my personal truck though, so take that as you will. Thanks for watching!

[@bigdaddymak1439]

That's a Teflon drain plug gasket and they're really good can get them pretty much anywhere. Why you going to put that cheap Amazon garbage washer on your brand new truck???

[@2carpros]

Actually those are a one time use crush washer and once they are crushed you can't re-use them. Those rubber lined washers I have used for 10 years with zero problems and they are my preferred washer. Thanks for watching!

[@bigdaddymak1439]

@@2carpros you call that a crush washer?? I replace them every time because they're cheap but it's not a crush washer. And it can be reused

[@2carpros]

@@bigdaddymak1439 Not according to the Toyota Service Manual which us where I got the info from.

[@sorigo6081]

Forgot to reset dash light😂😂😂

[@d0k3bi]

what the hell is this guys problem? why the hell is he so f'ing pleasant and likeable? making all of us look look like a pos, stop it!

[@2carpros]

Haha I can't help it! Thanks for watching!

[@davidater9]

It is only $54 at Walmart for this oil change. You might save $14.

[@2carpros]

Well, I'd rather save the money and I know the job is done right. I have heard countless horror stories about cheap shops like that end up costing the customer thousands in the long run. That 14 bucks you spent might end up costing you a whole lot more. Thanks for watching!

[@dannyfubar3099]

Thank you for posting, but the TACO is over engineered. Special puller just to remove the oil filter, and an special purge plug to remove oil trapped in the system. Remember when the plug drained the oil pan, and you could simply removed the oil filter by hand. Anything Toyo Motor Corporatism can nickel & dime their product owners over. And the Fob...I don't even want to get started on that garbage.

[@2carpros]

I like this truck, and I really like the drain for the oil filter. But I get where are coming from. Thanks for watching!

[@boston1450]

My 2020 Tacoma 2.7 had the old filter design. I just bought the 2023 Tacoma 3.5 & look forward to working on it. The new filter design probably works better & much cleaner. Worth buying the tool to remove filer VS wear oil all over hands/face. Great video. Thx

[@wagonhauler06]

You can just use the filter wrench and loosen the filter and most if the oil comes out. Then lower it down and dump it in your drain pan. A little more messy but you don’t have to mess with the plastic adapter.

[@WolfgangMinneapolis]

No worse than any other manufacturer.

[@johndough1264]

Toyota making it difficult so the average owner will pay $200 for service

[@2carpros]

That's the idea. But that's why you have me on here. Thanks for watching!

[@thomasjones1496]

Had i known the bufuckery toyota added to the oil change ritual I would have bought a Honda.

[@Nocturnal11Guy]

Nope. I'll just take my Taco in and have it worked on by Toyo mechanica

[@marcusvaldes]

Honestly this is the simplest thing to do.

[@bobdimartino6738]

6.2 quarts fills it with new filter and it cost about a hundred to do it yourself with materials

[@jerbinsternberg5824]

Hey rookie you forgot the anti seez

[@bakid470]

Stupidest design ever!