Hi, I own also a 2013 Husky 310 (red head) and just found your video (thks for posting!). I think that you are missing a couple of important things when doing this oil change... I also changed the oil on my bike last night and this is what I did: Firstly, (same as you did) un-did the skid plate, then untight the filling cap to let the air get into the engine, then un-did the drain plug located on the bottom side of the engine (not the one that you used to drain the oil) this plug has a much bigger hole and will drain the oil in two minutes BUT the most important thing is that is has a magnet, so all the metallic debris stays retained at that plug. This plug needs to be cleaned with a cloth and contact cleaner (brake cleaner). When the engine is "dry" of oil, then I took off the hose that you used to drain the oil. The metallic part that stays on the bike (lets call it "hose holder") where this hose is plugged needs to be removed also using a wrench, take it off the bike, and look for a long metalic filter inside that "hole" This is very important as is a pre-filter to avoid rubbish getting into the oil pump . Clean it up with contact cleaner, dry it with air pressure or with a cloth and put it back on the bike, then put back the also the "hose holder", then the hose and tight it up. I replaced the oil filter as you did. At times it leaks a little bit, than you can use a light film of NURAL to the joint. I feel that very important to do both things on each oil filter (un plug the main drain plug and clean the prefilter) as ALL the debris is retained at both points and will stay into your engine if not cleaned. I hope this helos! Thks from Spain!!!
@TheEdkelly65 жыл бұрын
megadede megadede thanks man, when you’re right, you’re right. I hope people who watch the video read your comment, thanks again for your input.
@Daanyr5 жыл бұрын
Mega you have a read head = old engine. He have a black head = new engine from 2011.... He make all thinks right
@megadedemegadede80925 жыл бұрын
@@Daanyr Hi, there are 2 types of Husky engines with a red head... the pre2.011 engine based on the 450 engine, and the new "superlight" engine on production on 2.012 (black head) and 2.013 (red head). Ed´s bike must be 2.011/2.012, (black head), mine is red head (2.013). Probably the oil change is different on the pre-2011 bikes, but on the superlight engines is the way I did.
@BlairAshworth4 жыл бұрын
@@megadedemegadede8092 I have a 2014 TE310R red head that is just like the 2013 I believe. I am about to do my first oil change since buying the bike last week. Your description helps a lot. Thank you.
@BlairAshworth4 жыл бұрын
Thanks Ed for your video. I just bought a used 2014 TE310R with a similar engine to yours and your video helps a lot. Megadede also had a good description of the screen that is "secretly" hidden that needs cleaning as well. Kind of complicated for a new owner but I'm sure it will be easy once I do it a few times.
@DankTank3742 ай бұрын
Hey thanks for making this vodeo i just picked one of these bikes up locally for a good deal and was on great shap bit was extremely confused as to where the oild drain was lol thanks man ! Seriously thankyou.
@TheEdkelly62 ай бұрын
@@DankTank374you got it, glad you found it helpful
@josephyoung1322 Жыл бұрын
Thank you much about this exact bike last week in your video was a perfect explanation of how to change the oil.
@michelwunderlich48614 жыл бұрын
thanks for this video! i was trying to remove the whole hose instead of removing the hose clamp
@TheEdkelly63 жыл бұрын
No sweat glad it helped
@joshhaynes54804 жыл бұрын
thanx brother..its a trip how different yrs and models have different set ups on the motors. I got a 2013 the 310. love the bike!thanx! J@sh.so.cal SGV..
@JohannesDalenMC3 жыл бұрын
How the reliability? I can get a ´12 model with 100 hours on it for 3000$. Im from Norway, and everything here is alot more expensive than the rest of the world..
@catmanflorida85455 жыл бұрын
I have a 2013 TXC 310 with the red head and I also remove the small screen filter when I change the oil and oil filter. This is an important step. I change my oil about every 5 hrs of ride time.
@sandygeorgia4 жыл бұрын
Hello guys, I'm building TE310R 2012, which I bought damaged and parted. Trying to figure out oil routing system. Different diagrams suggest different ways to connect hoses (3 hoses: from the airbox, from the engine Tom and from the engine bottom). I'm quite confused. Can you.please tell me how they are routed on your bikes. Thanks
@eladarale4 жыл бұрын
Hi, Thank you this is nice explanation for the oil engine change, Can you tell how much oil does it takes to change ?
@TheEdkelly64 жыл бұрын
Omg Studio Chile just shy of a quart. There’s a window on the engine to see the level of the oil as you’re refilling it that’s what you should use to determine when you have enough oil
@73karmuh2 жыл бұрын
hey bud I have a 2010 TE 250 X-lite. I just want to know the rig set up you did for the oil drain hose. Removing that rear bolt is a PIA. - Thanks
@johnharte9971 Жыл бұрын
What oil is best to use for this bike please? I know the best manufacturers, just not sure 5w 40 or ??. I'm planning on changing mine soon. thanks
@vintagemxer91656 ай бұрын
Mobil 1 0w-40 $28 5 qt FS European car formula and a stainless steel filter will allow better flow.
@JohannesDalenMC3 жыл бұрын
Do you still have the bike? Did/do you still enjoy it and it keeps running?
@TheEdkelly63 жыл бұрын
Yes, I am currently redoing the top end. I will have this bike until it dies
@eatingplaydoh3 жыл бұрын
How's the reliability been for you? I am the over the top with maintenance type...I have recently bought a 11 te250, which is why I ask. Thanks.
@TheEdkelly63 жыл бұрын
@@eatingplaydoh depends how hard you ride and if you race, I don’t race but do ride pretty hard and maintenance isn’t bad. Obviously it’s more than a drz400 but the performance is worth it
@vp_free21543 жыл бұрын
Hi, this is the original solution with this tube because in the manual I see that there is a screw in this place
@moparlover1968rr2 жыл бұрын
Last one I had was a 2013 and it was a bolt, bought a 2012 and it’s the hose.
@billydill9412 жыл бұрын
Thanks for the video I just bought a txc310 I'm wondering can I get a headlight for my bike?
@Victorhugomotoqueiro4 жыл бұрын
boa tarde meu e vander e moro no brasil. tenho uma moto desta do video husq. txc310r 2014; estou prescisando do motor de arranque e do acionador de partida (bendix) aqui no brasil nao tem muitas deste modelo na verdade so conheço a minha . por favor se tiver contato de alguem que tenha estas peças para me indicar que eu possa importar. obrigado