How To Change Taillight Bulb Sockets 99-04 Jeep Grand Cherokee

This video will show you how to change, and replace the light bulb sockets in the tail lights of your 99-04 Jeep Grand Cherokee.
Typically what happens is that you may experience a light out in the tail light of your Jeep Grand Cherokee. When you remove the socket and go to replace the bulb you may experienced a light bulb socket that has been over heated and is burn't.
In this video we will show you what to look for and how to easily change the light bulb sockets in the passenger or driver side tail lights of your Jeep.
Buy Replacement Taillight sockets: amzn.to/426rJlx
Buy Replacement Bulbs: amzn.to/43lIR7Y
Buy New Taillight and Socket Kit: amzn.to/3IIa7FY
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission based when products are purchased from them.

[@HomeOwnerRepair]

Buy Replacement Taillight sockets: amzn.to/426rJlx Buy Replacement Bulbs: amzn.to/43lIR7Y Buy New Taillight and Socket Kit: amzn.to/3IIa7FY

[@joanofarc-takebackhomeland1191]

WoW ! Can not thank you enough for excellent video. I am retired female. I really needed financially to fix this problem myself. Ordered NEW tail light assembly -right / left side. Got all new bulbs, grease and sockets. LEARNED secrets from your video. Now, to install and I'm pretty handy with this kind of stuff. Hope there will be many 'great returns' to your life for having giving this " helping hand" to those who watch this.

[@HomeOwnerRepair]

Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.

[@adventureswithkieran7760]

Even 2 years later. This video is on point. Explained very clearly. Thank You.

[@HomeOwnerRepair]

Glad it was helpful!

[@stevekelley7738]

This is one of the most in detail and informative how to videos I have seen anywhere on any topic.... Thanks !

[@HomeOwnerRepair]

Thanks for watching Steve

[@austinharding9734]

Nice an thorough, an smart with the greased rubber gaskets. Well done

[@HomeOwnerRepair]

Thanks for watching

[@robertduck1826]

Mine turned out to be a simple bulb replacement so I was lucky! Thank you the great instructions! Highly recommended video for anyone with a brakelight issue.

[@HomeOwnerRepair]

Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.

[@kll1238]

Thanks! Great, simple directions!

[@HomeOwnerRepair]

Glad it was helpful!

[@zaikdesdecali]

Great job! Love it! You safe the day brother !!! ❤❤❤

[@HomeOwnerRepair]

Thank you for watching our auto repair video that shows you how to replace the taillight bulb sockets on a 1999-2004 Jeep Grand Cherokee.

[@Dubblesteel]

Thanks for your video, it was a big help

[@HomeOwnerRepair]

Thanks for watching!

[@HomeOwnerRepair]

Don't forget to like our video and subscribe here: tiny.cc/2zi7ny

[@alale923]

Are these sockets interchangeable?

[@jonathangaetke]

After getting pulled over by Sheriff and warned, I fixed mine for the time being by just removing and reinstalling the same sockets. Connections on this Jeep model get hot and burnt. So also learned how to replace when i can - when i can afford to. Thank you Sir - good video !

[@HomeOwnerRepair]

Thanks for watching, hope this helps you out

[@guillermovasquez4639]

Thanks for this video man! I have to replace my bulbs too and you made this easy!

[@HomeOwnerRepair]

Glad it helped

[@zaikdesdecali]

Fix my light in a few minutes!!❤❤❤

[@HomeOwnerRepair]

Thanks for watching

[@mattdoherty8246]

Thank you and Awesome video and taillight is back up and running, quick note if you don’t have the special lube , I used petroleum jelly and it worked fine

[@HomeOwnerRepair]

Glad this helped you out. Have a great day!

[@themadbatter6611]

Thanks for the video

[@HomeOwnerRepair]

Thanks for watching. Don't forget to sub the channel to for more videos like this!

[@nancypaltin6012]

Thankfully, I love you ❤️

[@HomeOwnerRepair]

Thanks for watching

[@thanevakarian9762]

Thanks. One of the sockets was totally melted into the assembly... I’ll save you the details but I got it working.

[@HomeOwnerRepair]

Melted sockets are a common problem on these things

[@jalton9416]

Great video

[@HomeOwnerRepair]

Glad you enjoyed it

[@glendavick8583]

Thank you!

[@HomeOwnerRepair]

You're welcome!

[@philsmith1516]

2021 just used this video! Thanx

[@HomeOwnerRepair]

Thanks for watching

[@crapseven]

Thanks for sharing. I ordered a complete set of assemblies, sockets, bulbs and grease as you suggested. I am sending your video to my sister so she can see how its done properly they are not mechanically inclined so I assure you that your video will be a big help. Thanks again.

[@HomeOwnerRepair]

Glad this helped you out. Thanks for watching

[@bodeans59]

Thanks for posting this. Do each one of the three lights use the same sockets? Or, is it three different ones?

[@HomeOwnerRepair]

They are the same.

[@FromSaultoPaul]

There are two locks. 1) is the yellow snap you push to one side. 2) right down in the middle there is a very small tab that you need to lift up... I have a 04 Jeep Cr Cher Limited. They may not all have it but the one I had did have it.

[@HomeOwnerRepair]

Thanks for the added tip.

[@shaqmcflyy9380]

Where did you purchase the sockets?

[@HomeOwnerRepair]

See link in description.

[@headasschase8976]

For all the lights, brake, blinkers, and hazard, do they share the same bulb?

[@HomeOwnerRepair]

If you pull the bulbs out that you are trying to replace they should all have part numbers on them.

[@rosecruz7373]

I have tried everything. New bulbs, New sockets, and now whole New taillight casing. But my taillight still doesn't turn on. Brake and signal light works fine. When I turn on headlights at night the taillight on drivers side won't go on. Fuses are fine. It was working a couple of weeks ago. I'm at a loss. I've been stopped by the sheriff twice already. What can it be? How can I fix this? It's driving me nuts. Any thoughts, ideas or suggestions will be appreciated.

[@HomeOwnerRepair]

Those sockets can be a real pain the butt. Make sure when you twist the socket that they are seated into the circuit board correctly and locked into place. They can be hard to twist all the way in. Hope this helps you out

[@droski33]

Buy the LED tail light kit and be done with it.

[@qewqweeqwrsd]

Super late reply, but I have a similar issue (my right rear brake light doesn't turn on regardless of whether the headlights are on) and with mine it's clearly an issue with the removable wire connector and not the bulbs or the socket. To test it I stuck one of the head rests against the brake pedal and floor mat to complete the circuit then took out the taillight assembly and if I jiggle the connector around the brake light will start to work but it fails again as soon as I drive anywhere. I don't know enough about the light circuits to say whether the your issue could be caused by the same fault but I'm gonna try to take the connector apart tomorrow and if I succeed I'll let you know.

[@EnriqueGarcia-hu9ou]

Hey Rose, I’ve been having the exact same issue with mine. How did you get it fixed because I just changed the sockets and bulbs and that didn’t work for me either

[@LMudfoot]

@@EnriqueGarcia-hu9ou I repaired mine on an 02 by replacing the circuit board on light housing. took about 30 minutes & cost about $25. just needed a hair dryer, the circuit board & a little silicone

[@LifeIsBetterWithLove]

Do i only need a bulb? Or the socket too?

[@HomeOwnerRepair]

If the socket is not burn't you may be able to just replace the bulbs.

[@sandraywester8170]

I have a 2009 Jeep Cherokee I want to know how to change out the bulb because it the lights don't work the blinker don't work and the brake lights don't work

[@HomeOwnerRepair]

You may want to see if there is power going to the taillight, or if a fuse may be blown. The circuit boards on these Jeeps also go bad.

[@salazarw123]

I need the harness connector/plug. Loosing contact.

[@HomeOwnerRepair]

Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.

[@jat-justamaturetech-philpj8285]

You should always put a link to the parts you bought.

[@jamesrockon9340]

It's terribly difficult to do a Google search for the part isn't it

[@HomeOwnerRepair]

Will do

[@kathymaduke9276]

My 99 jeep grand cherokee has ratchet type screws.

[@HomeOwnerRepair]

Thanks for watching

[@albertvasquez3750]

How do u unplug it

[@HomeOwnerRepair]

Sorry just saw this

[@mstroud791]

I can't find the sockets anywhere, they all have wires attached.

[@HomeOwnerRepair]

Are you trying to buy replacements?

[@HomeOwnerRepair]

Here you go amzn.to/426rJlx