In this video I'll show you how easy it is to change the brake pads out on your Dodge journey. It takes just a few basic tools and about 30min per side. Good luck!
Пікірлер: 15
@mememetal666 Жыл бұрын
Great video, easily explained unlike other videos where they remove rotors. Whole brake holding part etc etc this is straight to the point! 👍
@therealdirtydog2 жыл бұрын
Good video. Just forgot to tell them to pump the brakes to get the piston back in contact with the brake pads. Otherwise the first time they try to stop they are in for a surprise..
@heavydutyreviews130311 ай бұрын
Yep!
@heavydutyreviews130311 ай бұрын
Well you don't need a 14mm wrench or a wrench. You do need a 13mm socket and ratchet for the caliper bolts, no wrench needed, 9mm or 3/4" lugnut 4 way tiretool needed. Watch how you put the caliper back on as you can twist the brake line
@maddmike91410 ай бұрын
Thank you
@KPrime3110 ай бұрын
Awesome job, thank you!
@JaspreetKaur-fl3ng Жыл бұрын
Very well explained
@xdangerneerx Жыл бұрын
Thank you so much man!
@markderksen74525 ай бұрын
One important thing you're not doing is servicing the slider pins, if they're seized, you'll wear a set of pads out in no time!
@ShawnWhetsel5 ай бұрын
Very good point! Yes, they should move freely or you will be back for round 2.
@andrewhendry85467 ай бұрын
Forgot to grease the lock pins on the mounting bracket. That's what the grease is for.
@KennyBenz Жыл бұрын
What piston are on the dodge journey 2012 two or one
@heavydutyreviews130311 ай бұрын
One
@ChadsNewEnglandTracks Жыл бұрын
If you had to do it on an SXT model you wouldn’t have been praising dodge so much,2012 was a mess for the sxt model, it came with either 12 or 13 in rotors single or dual piston or if you were the really unlucky guy like me who had to fix my cousins car it had the chrysler town n country Caliper brackets which made it a multiple trip to the parts store and lots of wasted time.nothing hard about the install once you have the right parts 🤦