Quick video showing you which tools etc you will need to change the oil on a renault master van, this van is a 2004 mark 2 2.5 dci. The oil can be purchased from Euro Car Parts.
Пікірлер: 43
@kennethdavison39354 жыл бұрын
brilliant no mess or fuss you gave me the confidence to do it |I don't think mine had ever been off either thanks so much Kenneth.
@DanielJohnHowTo4 жыл бұрын
No worries, if you take your time and have the right tools the job goes much smoother.
@johngaston28143 жыл бұрын
Thanks for video , useful content , did note from other videos other tools seem to work adequately to remove oil filter .
@DanielJohnHowTo3 жыл бұрын
Which other tools? Did you try the other tools yourself?
@SanchezDashcam11 ай бұрын
Nice video I was looking for the oilfiltertool and just ordered the same size you used in your video and it fit perfectly thanks
@gustavofantela59248 ай бұрын
Thanks man, you really helped me
@northmanclassics96514 жыл бұрын
Great video, thanks for the info. Job done on my van :-)
@DanielJohnHowTo4 жыл бұрын
no worries, thanks!
@JunglistBass5 жыл бұрын
Thanks for this video i am about to do mine this is a big help for a noob like me.
@DanielJohnHowTo5 жыл бұрын
No problem glad it helped, just take your time etc.
@timothy7901104 жыл бұрын
So my oil filter came with just the filter, no plastic end caps. Can I still use it? It's a bosch.
@grahamgourlay38286 жыл бұрын
Great video, thanks. What oil grade are you putting in?
@DanielJohnHowTo5 жыл бұрын
Hi Graham, I can't fully remember but it's some synthetic diesel oil from euro car parts - if you put the reg in it will show up, but it's not the cheap stuff either, we got it on one of thier deals. I hope that helps...
@rachelmayes32544 жыл бұрын
Hello. Thanks for the really helpful video. Just wanted to double check my van is a 2007 2464CC DCI 100 LWB - is this the same for my van? Thanks x
@DanielJohnHowTo4 жыл бұрын
It could be, but I can't say 100%. Alot of the vans are the same.
@ray12874 жыл бұрын
Hi again Daniel. Would have any recommendations on a synthetic oil. Can't decide between 5w30 10w40 etc. My van has 455,000 miles! (ex ambulance) thank you!
@DanielJohnHowTo4 жыл бұрын
5w30 will flow much better when the engine is started compared to 10w40, but 10w40 is better at high temperatures. Stress on parts is during the initial start up, I believe we went for 5w30 and its been fine.
@johnedwards41762 жыл бұрын
My 2009 mk 2 master has the same type of filter cover as my mk4 mondeo 27 mm socket
@timothy7901105 жыл бұрын
Where do we find the tool to get the oil filter cap off? And isn't it a good idea to fil the new filter with oil before filling it up?
@DanielJohnHowTo5 жыл бұрын
The oil filter wrench set is on Amazon, filling it up yes you can do that but this filter isn't like one you find on a car so unless you want oil running down your arm then no? Do this job then let us know how you got on, this video is pretty informative.
@timothy7901105 жыл бұрын
@@DanielJohnHowTo Cheers Daniel, will do! found it www.amazon.co.uk/Sealey-VS7006-V2-24-Filter-Wrench-Flutes/dp/B007574HOG/ref=sr_1_1?s=automotive&ie=UTF8&qid=1543357267&sr=1-1&keywords=96mm+x+18+flutes.
@DanielJohnHowTo5 жыл бұрын
@@timothy790110 that looks like it, i bought the kit because it's always handy to have good tools as you never know what you'll need. if you're in the uk and want oil check out euro car parts as they often have deals so you'll save loads. hope that helps.
@timothy7901105 жыл бұрын
@@DanielJohnHowTo Cheers mate, in sweden at the mo though, so Ill be doing it solo on my 2006 2.5 dci. GOnna do the fuel filter too, thanks to your vids! 5w-40 oil, right?
@timothy7901104 жыл бұрын
@@bernardcox9307 yes, i figured it out eventually, its just a different design than the one that was in there,, but just as good.
@timothy7901104 жыл бұрын
What noone mentions is that you need a new copper seal for the sump plug. What size?!
@DanielJohnHowTo4 жыл бұрын
You're right, you should ideally fit a new copper seal which i believe was included with the oil filter actually. No idea about size, just check it's included with the filter.
@timothy7901104 жыл бұрын
Daniel not in mine unfortunatly, and I got a fancy bosch!
@DanielJohnHowTo4 жыл бұрын
@@timothy790110 are you sure somebody hasn't had it out of the box? This does tend to happen sometimes.
@timothy7901104 жыл бұрын
@@DanielJohnHowTo yea I actually bought 2,one for backup and that didn't have any either..
@georgecroney61682 жыл бұрын
@@timothy790110 I went on Amazon and for less than a tenner got a box of every size imaginable. They looked like total crap on the listing but arrived and I was very pleasantly surprised by the quality.
@scrinja3 жыл бұрын
A jubilee clip will get it off with no issues if you get stuck
@DanielJohnHowTo3 жыл бұрын
Thanks for the advice!
@ionutungureanu78803 жыл бұрын
Does the 93 mm oil filter cover fit?
@DanielJohnHowTo3 жыл бұрын
i can't remember
@sweatyhelmets1245 Жыл бұрын
what oil did you use grade ?
@DanielJohnHowTo Жыл бұрын
I can't remember, check manual.
@kenco33704 жыл бұрын
Hi how many litres of oil do you put in?
@DanielJohnHowTo4 жыл бұрын
I can't remember off the top of my head, it might be included in the video but make sure you have the same engine and size failing that if you have the owners manual it will say in there.
@skokomurliak4 жыл бұрын
7.5 Liters
@neiljennings15565 жыл бұрын
Rubbish, Halfords 12'' pliers for filters works perfect
@DanielJohnHowTo5 жыл бұрын
They might work but aren't the proper tool. which means in future getting things off without slipping could be a problem. You're probably one of those people who round nuts off with your that'll do approach, then when somebody buys a car or it's taken into a garage has to deal with all the bodges.
@neiljennings15565 жыл бұрын
@@DanielJohnHowTo well maybe, but If you grip tightly there are notches on the tool that fit right into the filter notches, so no slipping at all it came off like a dream, I have been working on big engines since 1973, when I replaced a clutch on a tractor in the middle of a field, sometimes you have to 'make do' but i do favour 'old school mechanics over today's 'fitters', the majority of today's mechanics are too soft, and no common sense, but I see you are top of the range, on you'r driveway in the dirt
@georgecroney61682 жыл бұрын
@@neiljennings1556 haha nothing like an old boy having a moan, as a young mechanic I'll say you can't judge anyone off their age. Im constantly fixing the work of people that have been doing the job longer than I've been alive.