How To change The RGB on a Power Color Red Devil | Top3Tech

[@alex-iwnl]

very helpful, i've been wondering this for a couple of months. Thank you

[@Top3Entertainment]

Glad to help

[@luvu2tuesday]

BRUH thank you SO MUCH. All these months I thought there was no way to do this.

[@Top3Entertainment]

There's a way lol

[@Top3Entertainment]

I'm also doing a nvme giveaway and the entry deadline ends tonight

[@luvu2tuesday]

@@Top3Entertainment lol yeah, apparently

[@Top3Entertainment]

@@luvu2tuesday happy to help lol

[@Donivar]

Thanks you. I had no idea how to do it. I wasn't even sure whether that was a single color LED or RGB. Now I can just set it to white, and turn it off during the night if needed.

[@Top3Entertainment]

White is probably favorite RGB color. Matches my components perfectly

[@panduanggoro6804]

To synchronize with argb controller or motherboard make sure the little connector connect to your graphics card and one of the two similar connector to either argb controller or motherboard

[@Top3Entertainment]

Yes

[@shadowkid7409]

needed this like 6 months ago and then i stumbled on this and i solved my problem

[@Top3Entertainment]

It's been out for ten months lol

[@MoreWixch]

@@Top3Entertainment he said he actually found this and like youtube recommended it to him now

[@Top3Entertainment]

@@MoreWixch I know I'm just saying wish he found it sooner

[@twannerrzz]

What an absolute unit

[@Top3Entertainment]

Sheesh

[@FatihC.]

here is the video i was looking for thank you bro 👍👍👍👍

[@Top3Entertainment]

Your welcome and good luck 🤞

[@cryptojohnny7781]

Thanks bud , I was wondering that.

[@Top3Entertainment]

Hope it helps

[@noctoi]

OMG this is AWESOME! Thank you!!

[@Top3Entertainment]

No your awesome

[@MinistryOfMagic_DoM]

Turns out you don't need the cable. The cable let's your motherboard control it. The software does it directly without the cable. I do greatly appreciate your video for pointing me to the software though.

[@hydromc2513]

The cable lets it sync up with other rgb. You can independently control the rgb on the gpu from the software without cable

[@jonathanedward1244]

Hey I have 6900xt power color red devil, can I turn on GPU RGB without the 3 pin cables being connected to the motherboard? like not using cable at all? is that possible?@@hydromc2513

[@LudacrisREE]

I couldn't also use 'syncronize with motherboard' with my asrock mobo on the polychorme software. I used the argb cable also, but no luck. Did u finally figure out a way to sync it with ur asus board? lemme know dude,, thanks for the informative video!

[@Top3Entertainment]

No bro. I just have a bunch of RGB stuff so figured it was that

[@LudacrisREE]

@@Top3Entertainment darn, I just use the devil software to control my lights for now. I wish there was a fix :(

[@Top3Entertainment]

@@LudacrisREE will let you know if I do find a way

[@thekoldtruth7445]

Great video!! I've got some Lian Li SL120 fans in my build too and now I can change the color on my red devil! If you ever figure out how to sync it with the motherboard please let us know! Thanks again man!

[@Top3Entertainment]

What motherboard do you have?

[@thekoldtruth7445]

I've got a Asus ROG STRIX B650-A. I've never messed with this much rgb before so I'm just fumbling through it lol

[@Top3Entertainment]

Asus brothers 🤝

[@igordavoli2035]

@Top3Entertainment Eu tenho um Asus tuf b550m plus, mesmo problema. Você tentou atualizar seu firmware? Assisti a um vídeo que corrige o problema com um red devil rx 6600 xt, but not for me.

[@gravout7706]

Thank you, bro!

[@skinnyg190]

Any options for the 7900 gre? That model only has a download link for the adrenalin software, no rgb control. I'd rather have them turned off than red and I can't even do that.

[@Top3Entertainment]

On the power color website it says that you can change the RGB with the devilzone software

[@RevansNightmare]

I’m confused on why you needed the cable? My 7900 xtx red devil can be controlled with out it.

[@Top3Entertainment]

It syncs to motherboard or other rgb software ?

[@MineAndrej]

I have the red Dragon rx6800xt. The Light is red and I still cant change it with the App. Any help?

[@Top3Entertainment]

I'm pretty sure it's only a red led

[@MineAndrej]

@@Top3Entertainment Yeah i think it is Just an led but is there and Chance to Turn it of? It Just doesnt Match my rgb

[@diegogarridolopez7078]

Hi, i have a 5700XT red devil but the devil zone doesnt change the colours in the card, you know other softwares or how to make it work correctly

[@Top3Entertainment]

Was there a option when downloading the software that said 5700xt?

[@nicholasgrieco6634]

did they take it off the website someone lmk cause mine is stuck on orange and says n/a for this utility as of 6/7/23

[@buenosaires9211]

I also have this card. so this is supported by RGB or ARGB? Looks like the led inside could only displayed as one color at one special moment. Thanks！

[@Top3Entertainment]

Yup you can change colors on it

[@rafhaelluceq3012]

thank you friend

[@NormaBATES007]

Well, here it's not working either to sync with motherboard, also not with a argb controller. On google you can find more people having the same problem. So I guess the problem lyes with Powercolor. It's a bummer though

[@Top3Entertainment]

Sorry I don't program it just showing you one way to do it

[@DANICOLOMBIA100]

Can i change the rgb of the card from the windows without any cable?. I bought a second hand 6950xt and days after i noticed the rgb pins are broken and seems impossible to fix (two pins missing). so the card is stuck on red, but i wonder if i can change it from windows somehow?

[@Top3Entertainment]

You don't need the cable to change the color you only need the software. The cable is so you can sync it/ match it with the rest of your computer RGB

[@youtube.j.j.j]

Yo i downloaded it but the loading screen loads half way and then it just exits itself, tried restarting and running as admin, didn't work, do u know what could the problem be? I have a 6700xt and asus b550 mobo, shame cause the default cyan looks shit

[@Top3Entertainment]

Maybe they stop supporting the app

[@berserker_2886]

If my cable is piggybacked will it only sync with the mobo rgb? It didnt seem to work at all before i plugged it in

[@Top3Entertainment]

Piggy backed like connected to a RGB hub?

[@berserker_2886]

@@Top3Entertainment sorry, yeah. It worked anyway with the powercolor software

[@ericdoran4313]

Dope thanks bro

[@Top3Entertainment]

Hell yeah

[@isaiah9160]

Do you have a link to the cable needed to connect it to motherboard? Or does the cable come with the gpu?

[@Top3Entertainment]

It comes with the GPU but it is a female to female 3 pin 5 volt Argb wire

[@AuDiGo6]

Hi, do I need to have an RGB cable plugged in for the card to glow in any way? Because my RD doesn't light up

[@Top3Entertainment]

No you shouldn't but maybe download devilzone and see if it's off

[@Manuel-iq8wg]

Hey, did u find out something? Is the software needed to glow? Got mine today, tested it short time and it wasnt glow. But i didnt downloaded the software

[@ericdoran4313]

​@Manuel no it's automatic

[@Rectorn]

Does anyone know if the display port/hdmi output leds are always red? I had never really noticed it before but now it’s bugging me. I initially thought it was an error light but then realized they do have those lights so I’m not sure what’s going on.

[@Top3Entertainment]

They're always on

[@Rectorn]

and always red? thank you for your reply@@Top3Entertainment

[@caelanmatter6922]

hey i have the software downloaded and have the argb wire connected. i still cannot get the software to change the color on my RX6750XT. I dont know if it is a glitch i am experiencing or what, i feel as tho i have tried everything. I would love your input. thanks!

[@Top3Entertainment]

I couldn't get it to work with my aura sync but have used it on a aorus motherboard

[@caelanmatter6922]

@@Top3Entertainment i actually have a aorus motherboard as well. can u think of anything i might be forgetting to check as to why it’s not working?

[@Top3Entertainment]

@@caelanmatter6922 is this a fresh install or have you had RGB fusion on for a while ?

[@caelanmatter6922]

@@Top3Entertainment i just built this pc on tuesday. last night was the first time i tried to sort my rgb. so pretty fresh

[@Top3Entertainment]

@@caelanmatter6922 do you have RGB fusion already installed? And did you connect your three pin 5 volt argb to the motherboard or to a rgb hub?

[@PCJack]

I need to get myself one of those.

[@Top3Entertainment]

Make your dreams come true

[@twannerrzz]

Don't let ur dreams be dreams lol

[@reapzonfly]

does this also work for the red dragon variant ?

[@Top3Entertainment]

I believe the red dragon is only red

[@Fremmy]

Oddly not working for me on my Radeon RX 7900 XT

[@Top3Entertainment]

Did you download the 7900 XT version?

[@Fremmy]

@@Top3Entertainment I did, but when I press apply it wont do anything, not change color, not change mode from fixed to pulsing or off. I tried OpenRGB but it doesn’t identify my GPU as compatible.

[@Top3Entertainment]

@@Fremmy that's odd

[@FINE356]

6800xt not working

[@Top3Entertainment]

@@FINE356 that one is weirder because because I know the 6000 series works on the software

[@m3ndoza28]

It says N/A on the website now for some reason

[@Top3Entertainment]

Weird

[@little_Nobody3169]

Does it work on the 7900gre hellhount to?

[@Top3Entertainment]

Unfortunately it doesn't work on hellhounds

[@little_Nobody3169]

@@Top3Entertainment alright. Thanks a lot.

[@Top3Entertainment]

I'm with you on it should have been RGB and not just LEDs

[@MyEyesArentClosed]

Can you do it on a and rx 7800 xt hellhound

[@Top3Entertainment]

No those only have their programmed colors

[@unbiasedtruth23]

idk if anyone else has asked this, but can you help me find where to connect the other end of the rgb cable on the mother board? I have a b450-f rog strix, I'm not sure if I need a newer motherboard that has those pins, but I can't find it on mine.

[@Top3Entertainment]

i dont believe it does have one

[@unbiasedtruth23]

@@Top3Entertainment that’s what I’ve pretty much concluded as well. Do you know of any good boards that would pair well with a ryzen 7 5700x cpu? I’d really appreciate it 🙏

[@Top3Entertainment]

@@unbiasedtruth23 you can still change the color but it won't sync with your other RGB lights. Maybe leave the GPU on a static color

[@G.FRE1TAZ]

U try to put your rgb cable on your controller ?

[@Top3Entertainment]

To my fan hub?

[@G.FRE1TAZ]

@@Top3Entertainment yes

[@Top3Entertainment]

@@G.FRE1TAZ yes. I have the 3 pin to my AIO on there and it connects

[@G.FRE1TAZ]

@@Top3Entertainment my 6900xt arrived today... i gonna test the rgb to sync with my motherboard

[@Top3Entertainment]

Hell yeah

[@oldmannoob8105]

Can I plug it into my Argb Hub?

[@Top3Entertainment]

It should work. Only one way to find out

[@-shinigami5900]

thx man

[@Top3Entertainment]

Glad to help

[@SkizzyMajin]

Thanks

[@Top3Entertainment]

No problem hope you had better luck than me connecting it to the motherboard lol

[@zrichiii8338]

it didnt works on my rx 6700 xt red devil :(

[@Top3Entertainment]

Damn

[@malinamalinowsky]

Program don't see my gpu😢

[@PoshTaradol]

I don't like latest version (New DevilZone FAN RGB control utility (2024 edition) V 1.3) Neon mode is Missing modes: Cycle and Color Shift not Smooth

[@ThatOneGuyC]

so its actually a rainbow devil

[@Top3Entertainment]

@@ThatOneGuyC you win

[@MichaelShorts123]

i dont have these 3 pins. Do you know why they are missing?

[@Top3Entertainment]

What model

[@loganshields8233]

How do I change my rgb on a ASRock AMD Radeon RX 7900 XT Phantom

[@Top3Entertainment]

You have to download the polychrome APp

[@mohamadmuaaz9589]

Why is it not functioning when I connect to my argb controller?

[@Top3Entertainment]

Did you use the wire that was included?

[@mohamadmuaaz9589]

@@Top3Entertainment yup

[@marcflamer5307]

Same issue here, I have a Red Devil 7900 XTX and it wont sync with my Asus mobo

[@Top3Entertainment]

Terrible. It worked with my cousins gigabyte aorus elite x570

[@Top3Entertainment]

Are you going to leave it one solid color.

[@marcflamer5307]

@@Top3Entertainment yeah it’s a brand new build. z790 mobo 13th Gen Intel board

[@marcflamer5307]

@@Top3Entertainment got my fans and case breathing and i am going to try time the breathing option on the gpu with the mobo and case breathing. If not I’ll be ok, I’m not losing sleep over it

[@Top3Entertainment]

Time to return the PC parts lol jk

[@ikrugani]

can i change it without pluging the wire in ?? cuz i didnt build the pc myself and the wire is still in the gpu box

[@ikrugani]

so i tried to change it without the wire and it worked:) :)

[@Top3Entertainment]

@@ikrugani hell yeah. The wire is to sync it with the rest of your RGB software

[@robindinero9689]

any chance to deactivate the IO leds at the back for the DP n HDMi ports?

[@Top3Entertainment]

You already tried turning off the RGB lights?

[@robindinero9689]

ity for the reply @@Top3Entertainment , i was able to turn off the logo and the overall led on that gpu but there is also lights at the back of the DP and hdmi port that im not able to turn off -.-

[@Top3Entertainment]

@@robindinero9689 I didn't think so but I do like that feature

[@viniciusselotto8427]

Can I change the RGB color by Pci -e without using that cable? I have a chinese motherboard without any RGB feature...

[@Top3Entertainment]

Yes you can but not sync it with the rest of your RGB. You can always pick a static color and match them all like that tho

[@viniciusselotto8427]

@@Top3Entertainment thaks man. One more question, I will be able to choose some effects too? I will only not be able to sync, right?

[@Top3Entertainment]

@@viniciusselotto8427 at 1:52 those are all your options

[@viniciusselotto8427]

@@Top3Entertainment will It sync using the cable on a external ARGB controller? Sorry making more questions brother, you are awesome helping us!!

[@Top3Entertainment]

@@viniciusselotto8427 you will have to let me know on that one. Didn't work for me

[@patresko0o]

can i change my rgb on 7700xt?

[@Top3Entertainment]

Red devil 7700xt?

[@YesYesVeryWell]

Is this the same with the hellhound?

[@Top3Entertainment]

Hellhound only has one color

[@briandiff1459]

Cant set custom colors in the new software, no way to set it to white, nor can you adjust the RGB values.

[@Top3Entertainment]

That sounds awful

[@briandiff1459]

@@Top3Entertainment emailed them, hopefully they will provide a link to older revisions of the software

[@dF-sy7ch]

I dont understand where it goes in the motherboard i hook up the 3 pins but theres only two spots with 3 pins on the motherboard and it dont work with those.

[@Top3Entertainment]

You should only be connecting it to the 5v 3 pin argb header

[@dF-sy7ch]

@Top3Entertainment i figured out how to change it, but not by how this video says.

[@Top3Entertainment]

@@dF-sy7ch nice

[@bhimosatrio3977]

​@@dF-sy7ch can you tell me how?

[@farserpent1]

use asus rgb software that's the motherboard you have

[@Top3Entertainment]

I tried that. You normally have to sync to motherboard then use aura sync

[@Top3Entertainment]

3:07

[@Onehardbuffalo]

Mine don't work how do I get it to work I did what video showed

[@Top3Entertainment]

What motherboard?

[@Onehardbuffalo]

@@Top3Entertainment msi b650 pro wifi

[@Top3Entertainment]

@@Onehardbuffalo mystic light?

[@Onehardbuffalo]

@Top3Entertainment it started working out of nowhere idk why but it's working now

[@Top3Entertainment]

@@Onehardbuffalo that's good lol

[@ahdt8167]

scanned the file through virus total and its saying it has malware. Not gonna launch the file, seems shady. I appreciate the vid tho

[@Top3Entertainment]

That's odd

[@SkizzyMajin]

Hey bro did you download for the official website? I've scanned it and it says it clean.

[@SkizzyMajin]

@@Top3Entertainment I scanned it using the same tool but seems clean tho.

[@Top3Entertainment]

I don't think you will convince him

[@ericdoran4313]

Lol

[@NedRigNerd]

This didn't do shit but redownload adrenaline

[@Top3Entertainment]

Odd seems like you got lost in the sauce somewhere

[@NedRigNerd]

@@Top3Entertainment no did what you said.

[@Top3Entertainment]

@@NedRigNerd idk what to tell you. It worked for me and multiple other people

[@Top3Entertainment]

@@NedRigNerd hey wait a minute I remember you. Weren't you the guy that was arguing with me on that 7900 xt Merc black edition video and you were defending the guy who said GPUs don't need RGB lmao

[@Arokhantos]

No rainbow no motherboard control powercolor be like lets link this video and act stuborn act as if the liquid devil is capable of things its not capable off.

[@Top3Entertainment]

The liquid devil doesn't let you do that?

[@Top3Entertainment]

Do you think I'm affiliated with power color?

[@Arokhantos]

@@Top3Entertainment I did not say you are stop making assumptions Powercolor linked your video im just annoyed they are being lazy

[@Top3Entertainment]

@@Arokhantos that's why I'm asking. Where did they link my video at?

[@Arokhantos]

@@Top3Entertainment its really shame it does not have argb header im bassicly stuck to static color now cos of lack of mainboard control :(

[@jeyraldabad2231]

without link its trash vid

[@Top3Entertainment]

If you can't use your brain your a trash person

[@SPDSTEVE]

You didn't let us know where you got the software or anything about it. Useless video

[@Top3Entertainment]

The url is literally in the shot of where I download the software. Then I explain the software colors so you have a useless comment

[@PatrickBateman32]

Dose anyone know If i can sync this with razer synapse?