How to change the spring in the Specna Arms J-Series replicas?

[@King_Bob_The_Third]

Just got me a brand new J-Series and need to swap out the spring with no idea how to access the "ESA Quick spring change" feature. 😂 Thank you for the tutorial. 👍

[@demessis3513]

I know it's to years later but. I got the new J06 AK74 Edge 2.0. And for the love of god i cannot find anywhere how to disassemble to front Barrel, i want to get to the inner barrel and hop up. There's no info online. I've tried for several hours, to poke and prod at screws and pins and can't figure out how to disassemble it. By any chance you have a guide or any idea?

[@Akula1911]

Did you removed the two screws under the rear sight on both sides?

[@demessis3513]

I figured it out. There's an impossible tiny screw inside the rear sight. Unscrewing that let's go of the inner barrel. But it's then impossible to pull out the inner barrel even if you remove the gear box. So on mine there's a bolt in front of the sight, that goes trough the body of the riffle. And with a pick and hammer you gotta smack it out. That will release the entire front grip and tube of the rifle. Half of nightmare to get in to upgrade a bucking or to properly clean the inner barrel 😅

[@alejandrolucerobarrios5686]

That's the only way? For real? I have a core series J, and want to clean the inner barrel​@@demessis3513

[@Terminatorbart]

Good tutorial!

[@machlas5372]

Can same give me tip on some lightweight AEG under 2KG

[@tj4y48]

Workout.

[@machlas5372]

@@tj4y48 too late i buy cyma ak74. U and its good

[@kravmagaweiz7030]

Good tutorial. It isn´t a quick spring change because you can´t quick change the spring. You have to disassemble the whole gun to change the spring. On the field is it non comfortable and hard possible. But the J-series is looking good!

[@gunfire]

In "good old days" it was the fastest spring change system on the market ;)

[@tj4y48]

Almost every gun i have requires some sort of disassemble to change the spring. Most AR15 Variants need the buffer tube remove for example. Its a quick change system in that sense, that you dont need to complety remove and disassemble the gearbox to get to the spring.

[@mr.slovenc]

First like

[@kevinkellyclips9031]

Will this work on LCT Akms too ?