How To Change The Starter On A 2010 Chrysler Town & Country | Step By Step Start To Finish

How To Change The Starter On A 2010 Chrysler Town & Country | Step By Step Start To Finish
Craftsman Ratchet, Rotator, 3/8 Inch Drive (CMMT86000)
amzn.to/3PVfBRd
Tools 4 Dads Podcast - My Brother-In-Law And I discuss The Tools That We Use To Become Better Father's, Husbands and Neighbors
redcircle.com/shows/tools-4-d...
My Wife & Brother-In-Law Do Some Deep Diving Into Some Of The Most Popular & Not-So-Popular Conspiracy Theories Out There
redcircle.com/shows/tin-foil-...
To see the latest merchandise and to contact us check out our website
www.masteringmayhem.com/
Tips and/or donations for maintaining and growing the channel are greatly appreciated: paypal.me/MariusContra
If you like custom pocket knives and want to see how this is done, check out my brothers KZbin channel here: / @knathansknives
Home Depot Milwaukee 2 1.5 Ah batteries for $19.97
👉 Links below are affiliate links. If you buy something through this link I may get a small share of the sale. ❤️ (Always check links for most current prices)
DEWALT 20V MAX Cordless Drill Combo Kit, 9-Tool (DCK940D2) - Epic Deal!
amzn.to/3pisMxg
DEWALT Mechanics Tools Kit and Socket Set, 108-Piece (DWMT73801) - Epic Deal!
amzn.to/3cdw53v
DEWALT 20V Max XR Impact Wrench Kit, Brushless, High Torque, Detent Pin Anvil, 1/2-Inch (DCF899M1) - Epic Deal!
amzn.to/3vNuNDQ
GEARWRENCH 68 Pc. 1/4" & 3/8" Drive Mechanics Tool Set, 6 & 12 Pt., Standard & Deep, SAE/Metric - 83000 - 69% OFF!! (While It Lasts)
amzn.to/3vNiGqn
DEWALT CIRCULAR SAW, 7 1/4 in Blade Dia., Right Blade Side, Bevel Angle Range 0 Degrees - 359WF0|DCS573B/DCB205CK - Grainger
bit.ly/2TygTqZ
DEWALT Cordless, Impact Wrench, 20V DC, 600 ft-lb Breakaway Torque - 234Z82|DCF894B / DCB205CK - Grainger
bit.ly/3cfekk9
DEWALT Hammer Drill Kit, 1/2" Chuck, 20V, Cordless - 349JL8|DCD997CB/ DCB205CK - Grainger
bit.ly/3cbh3Lo
Home Depot DeWALT Mechanics Tool Set (226-Piece) with TOUGHSYSTEM 22 in. Medium Tool Box
thd.co/3ieCxLg
Home Depot DeWALT 15 Amp Corded 8-1/4 in. Compact Jobsite Tablesaw with Compact Table Saw Stand - 30% OFF!
thd.co/34UUdnv
DeWALT DCS391B 20V 6-1/2-Inch Lithium-Ion Cordless Circular Saw - Bare Tool - $99
ebay.us/ODTRQT
DEWALT DCK300P1 20V MAX XR Brushless 3-Tool Woodworking Kit w/ 5Ah & Faster Charger Included - $399!!
amzn.to/2RPlrsJ
DeWALT 20V MAX XR Cordless Impact Wrench (Bare Tool) - $149
amzn.to/3bytPDm
HORUSDY 32-Piece 1/4" Shan Extra Long Security Power Bit Set, 6" Long Tamper Proof Security Bits, S2 Steel
amzn.to/2S1CwPW
DEWALT 20V MAX XR Cordless Impact Wrench with Hog Ring Anvil, 1/2-Inch, Tool Only (DCF894HB)
amzn.to/3bmr88g
DEWALT XTREME 12V MAX Reciprocating Saw, One-Handed, Cordless Kit (DCS312G1)
amzn.to/30hi8ek
Turbo Cordless Blower 3-speed Kit LB5302-Reconditioned
imp.i284638.net/e4nGmX
ToolNut Free Bonus 18V Impact Driver Deal
www.toolnut.com/on-sale/makit...
Home Depot Milwaukee M18 Hybrid Jobsite Fan Kit w/5Ah Battery 50% OFF!
www.homedepot.com/p/Milwaukee...
DeWALT DCF787C1 1/4 Impact Driver Kit
www.factoryauthorizedoutlet.c...
EQUIPMENT I USE FOR MY VIDEOS:
New Apple iPhone 12 Pro (512GB, Graphite) [Locked] + Carrier Subscription
www.amazon.com/gp/product/B08...
Canon EOS M50 Mark II + EF-M 15-45mm is STM Kit Black www.amazon.com/gp/product/B08...
►This track: inaudio.org/track/heroes-epic/
Join our community: bit.ly/38egfRR
"Heroes" is 100% no copyright background music (royalty free)!
This track on Spotify: open.spotify.com/album/1OFJkg...
You can use this track for any projects and monetize it.
#masteringmayhem #changingstarter #diy

[@jduasvte2436]

Great job 👍 you lucked out with the starter being up front and the wiring pretty accessible. Working on your car is therapeutic (when everything goes as plan) 😂

[@MasteringMayhem]

Yes, when it goes as planned. Otherwise it just reminds me why I never became a mechanic 🙂✌️❤️

[@ToolswithSoAlz]

Dad used to bypass the starter by using a long handle screwdriver. Years later I used this same trick to hotwire my lawnmower when the solenoid went bad.

[@bobpaulino4714]

Can't get to the solenoid on this one. Old Ford's had the solenoid on the fender well. Common sense went out the window ---

[@SQUIDX01]

Thanks for the share. I love to fix my 2010 Chrysler town and country 4.0. I didn't know if I could fix my starter. But now I know. So, Thanks again. You did a great job 👏 👍 🙌 👌.

[@TARWERG]

Good job man . i don't know why you have more room for the starter

[@nerdymra8252]

Was anyone else wishing that they had the wood paneled Town & Country 😁 Marius, you definitely mastered the mayhem, or maybe edited out, the swearing that makes any car fix move forward. 🤓👍

[@MasteringMayhem]

I any recall if I swore any during this adventure but I definitely recall the frustration during some parts of the change out 🙂✌️❤️

[@rodw]

VERY NICELY DONE MY FRIEND !!! BROUGHT BACK A FEW MEMORIES OF THE FIRST TIME I HAD TO CHANGE MY STARTER. USED AN OLD CHILTON BOOK. THANKS FOR SHARING YOUR THOUGHTS AND VIDEOS RODNEY

[@frankenpickle1923]

It’s nice that when you see a teachable moment you use it! Ty so many benefit from these helpful videos!! Your all in his good graces!! God bless!!

[@eduardohuerta7559]

The small wire is the signal wire the bigger one is constant battery power. The ground is achieved by the bolts and starter up against the engine because the engine is grounded

[@cherylhettich639]

Great video thank you!!!!! Sure wish i had your double racketing socket wrench!!

[@kevinrutigliano9707]

You sound like me! Best video ever!

[@2DJeff_3DPrinting]

Great video! Thanks for sharing. I have a 2008 Grand Caravan. If I ever need to change my starter, I'll refer to this video. It gives a great since of accomplishment doing stuff on your own, huh?!

[@MasteringMayhem]

It does 🙂✌️❤️

[@paulpetry3675]

Congrts! you are now an official "Car guy/mechanic"

[@kaleturney5043]

Super helpful, my guy. Thanks!

[@wolfparty4234]

Very helpful Bro!!!! Thank you for sharing!!!💪🏼🔥🔥🔥👍🏻

[@MasteringMayhem]

You’re welcome. Thanks for supporting the channel 🙂✌️❤️

[@tylerhenry3665]

Good job on installing the new starter

[@Joethetoolguy]

Hell yeah 🚗 I am so in for this bro! Put a turbo in!

[@MasteringMayhem]

Shoot…the van can barely handle premium 92 gasoline, the turbo would finish it 🤯

[@ToolswithSoAlz]

If it can't handle a Turbo, your only alternative is to go with NOS.

[@ernestoserr3885]

I´m not a mechanic expert but this is useful ,,, now I know how to change a starter ,,, thanks !!!

[@MasteringMayhem]

You bet. I’m a DIY’er and definitely not a pro. Just had to do it to save some money 🙂✌️❤️

[@tjo8673]

Great job!

[@LLAMA-LLAMA]

Dude, where are the power tools?? Nice job on the install.

[@MasteringMayhem]

None required on this one 🙂✌️❤️

[@k-nutl6386]

Nicely done

[@dougthomasmusic]

Awesome job brother. You really helped me out here. Funny thing was, one of the hardest parts of this was finding where that dogon thing was. 😄 you gave me the encouragement I needed. Saved me a lot of cash. The other was that with that craftsman twist action ratchet, it saves you from having to take the front fans and cowling off. I owe you a beer! Take care. 🏖🎶🎸🦜

[@MasteringMayhem]

I’ll take you up on that beer. Very glad to have helped with this video. I hope you and yours are well 🙂✌️❤️

[@TARWERG]

Good 🎥 brother thank you

[@trentwilliams4453]

That horn scared you a lil there at the end lol

[@MasteringMayhem]

Yes it did, forgot what to expect when I reconnected the battery 🙂✌️❤️

[@countrifiedjose7537]

Good job. I'm no mechanic but sounds like maybe you have some noise coming from a bad pulley. I need to find me that craftsman ratchet.

[@MasteringMayhem]

It’s a very nice ratchet. Comes in handy for sure.

[@trentwilliams4453]

Great job !!!!! See you tomorrow night

[@MasteringMayhem]

Thank you. Tomorrow night is gonna be lit 🔥 🙂✌️❤️

[@eastcoastgalshea6501]

We changed starter it started and now won't do anything!! Any ideas as to why

[@QackyVr]

Good job

[@brandonslechta2510]

Hi. I was just quoted $780 to replace the starter on my 2010 town and country. How long do you think this took you from start to finish?

[@MasteringMayhem]

With filming the video it took me about an hour and a half. I’d say it’s an hour job give or take if you have all the tools. Let me know if you end up doing it yourself. 🙂✌️❤️

[@MecanicoChicago]

What's the name of that ratchet?? I need it!!

[@MasteringMayhem]

Craftsman rotating/rotator ratchet: amzn.to/3J5qgVw Stanley has one too: amzn.to/3J8fL3Z

[@steve8956]

I'll let ya know when I get it back on. God I hope it works. I'm kinds of stuck 5 hrs from home am had to work to cash job's to buy my starter. My phone is off already so it map's and rd signs home 😝

[@paulpetry3675]

Great video, my biggest fear s bad starter when on long trip. - but try to keep camera from moving around too much, makes me sea sick all over again

[@thelegendarywasdgamer9724]

Lol bro he's working on a car. Stop being a wuss.

[@gatitaoso4443]

I would not even know where to begin on any kind of auto repair!!

[@ToolswithSoAlz]

Did you ever wish you had the 12v Husky ratchet?

[@MasteringMayhem]

Yes 🙂

[@davidhudson1290]

Wouldn't fit.

[@TheGeno2001h]

What was the thing you broke?

[@kMaxRx]

Is this the 3.3 or 3.6 or 3.8 or 4.0?

[@MasteringMayhem]

We sold it a while back but from what I remember it was the 3.6

[@kMaxRx]

Thanks, I got the 4.0@@MasteringMayhem

[@benjcanlas3530]

Tools for my dad pls

[@Crzgrape]

Did he ever mention what size engine that is

[@tyronevonchadley]

Looks like the 3.8l

[@Crzgrape]

@@tyronevonchadley I know what it looks like. Did he ever mention what size engine that is

[@perropulgas25]

👍

[@DeathbringerDrago]

You also Removed a part of your exhaust without mentioning it.

[@SR9CPL]

yeah that was kind of aggravating

[@joecorreia1146]

Not a gasket, Its a shim

[@konamanstudio2447]

👍🏻🍻🍺🤙🏼

[@cherylhettich639]

Great video thank you!!!!! Sure wish i had your double racketing socket wrench!!