How to Change the Wheel Speed Sensor on a Dodge Challenger

[@KOLYNandKYLYNN]

hey my friend thank you so much for this video 2013 challenger rt owner here went to the dealer and they wanted 200$ to do this job for one sensor so while i was there i went to the parts department and bought 2 sensors for the front left and right for 40$ and installed them both with ease with the help from u of course again thanks

[@shannonmurphy6567]

Great video. Changed my front left and rear today on 2012 Charger. Your assistance helprd me save a lot of money

[@mycuzvinny]

Very good videography. Thanks for taking such good camera angles, lighting, and focus.

[@davidrivera7987]

Great job on the step by step.... I really appreciate it. You leave no room for guess work. Thank you very much.

[@OhhDaily]

Thank you so much I’m having this issue and I’m about to try and fix it today. This video is the only one I could find explaining everything this good. Appreciate the help and keep it up!

[@johnbedics4112]

Thank you for the video on changing the wheel speed sensor on the Challenger, saved me a ton of money

[@lucasrucks8947]

Super helpful. Thank you. The last plastic clip (the red one) would have had me guessing

[@robertesposito2993]

Thank you so much for the detail on how to separate the speed sensor. I tried for 1/2 hr and failed@@@ Thank you again !!!!!! Awesome work !!!

[@Fdesouza]

I had my ABS lights on, thanks a lot dude. Just got my sensor replaced in 10 minutes. saved me couple bucks

[@TAYDABG]

Daaaamn man thanks!!! Dealership just told me that this will cost $800!!! Wtf!!! And you just fixed it that fast🤦🏾‍♂️ I’m not mechanics at all but this is too easy I think I can def do this myself👍🏾👍🏾👍🏾

[@daveevans2527]

Thank-you for explaining the connector clip - That two step process is missing in all other KZbin videos, and for the 2011 Chrysler 300 (same hardware, with the connector behind the front wheel well plastic), the clip is oriented with the chassis wire up, so in Florida it gets sand down into the clip area - really hard to get the red tab completely out, and then squeeze the black part. Required spray cleaner and a small pick to get the red clip out, and then a small flat bladed screw driver to apply enough down-force to squeeze the black clip in - finally got it apart. Otherwise a pretty easy repair. Many thanks for the video!

[@tracymartin8347]

Video was very helpful I change mine because of your video thank you I really appreciate it I will tell others who have this problem.

[@jasondtanksley]

I will be doing this to my 2014 Challenger this evening (left rear). Thank you for this excellent video!!

[@TheMonkeyeats]

Perfect explanation ! Thanks 👍.. did not know the red clip came all the way out

[@eavila87]

Thank you for this video. I had to change mine today on my 2013 Charger 3.6L on my front driver side wheel. Luckily I came across your video for the assist and with that this is the 1 video that was spot on from start to finish. I've seen other videos on other repairs where scenes are cut but this is the best video ever I use a reference.

[@deatheffect575]

Great video. Great editing. Great camera angles. Thanks.

[@chriswyatt203]

Great video.. I have a 2012 Dodge Charger, and this worked exactly the same way. Fixed my problem myself with the help of this video, and only paid $11 for the part. Dealership wanted to charge me $300 for this repair!

[@yourhomeplansource4706]

Thanks for the video. Used this as a basis for a 2006 Stratus and worked like a charm. Saved big bucks doing it myself. ABS lights went out after driving 50 ft.

[@ProphetOfIsa]

Ken H happy to hear that

[@joelombardo4036]

Thanks for the great video. I was able to save crazy money replacing the two rear sensors on my 2013 Charger with the tips here. The Front Collision Warning Off, ABS, and Traction Control warning lights had been coming on together periodically and these sensors should clear that right up. Thanks again.

[@Sungjinwoo2456]

Did it work?

[@daltondickens1848]

Thanks for the tip, especially around that darn plug. Being used to "normal" automotive locking style electrical plugs, I figured it was the same on my 2011 Dodge Caliber. Slide the lock back, press down on the back of locking tab...and boom...comes apart, but NO MOPAR...had to make it difficult. I bet I messed with the passenger side plug for an well over an hour...walk away, cuss, go back. Having to stick my hand in places only a little persons hands are supposed to go to get to it too. To their defense...I have seen where the normal style with the locking tab out will not release due to dirt, grime and heat.

[@ZaddyinaCaddy]

I’m assuming my speed sensor is faulty. Abs light and traction light turned on. Then turned off. Then turned on again during a warmer/hotter day. Did you have similar indications?

[@TheRealTVGuy]

Awesome Job Sir. This video was very well produced and definitely helped me!

[@escottcarp]

The code should clear while doing your post-test drive; somewhere around 15 mph.

[@msshanicemoodie2594]

Thank you for being a great teacher of the brotherhood of dodge

[@tcole6216]

Very good instructions. This worked for my 2015 scat pack rear wheel speed sensor. Thanks

[@PlumCrazyShaker]

How do you tell which one is bad?

[@babberdydabberdy3551]

That's what I'm trying to figure out

[@cj_m8811]

Putting that red lock back in is by far the hardest thing with this. It won't go that last little bit

[@biglew52]

Thanks man! You just saved me $200 with this video.

[@seanbordenkircher7854]

Still a useful video, thanks for this! I'm about to undertake the same on the front end of my 2013 AWD R/T

[@adamrodriguez2553]

i had like 3 different codes when they checked my car but they said it could be either one but im feeling like it would be the sensor like on your car

[@Arjones2008]

Did you use that same odb2 scan tool to figure out which sensor was bad?

[@jo4532]

Great video! This really helped me a lot straight to the point.....👍🏽

[@Faithlove305]

Thank you so much We’re going to step through step me and my husband are definitely subscribing to you thank you so much

[@cfb33774]

How do you find out which one of the 4 wheel speed sensors are bad?

[@mistyroberson79]

I have a 2009 dodge charger and i keep getting the p0501 vehicle speed sensor 1 performance code. The auto parts store told my spouse it was the input then it was the output and we have changed those both so after further investigation i went back and got a picture of what the obd was reading and i am linking it to the wheel speed sensor however does all four wheels have this sensor or just the front or back or how can i find out which one without having to take all four tires off?

[@mopar392ta3]

I just changed mine thanks to you sir. this also works for chrysler 300's . I don't have a way to clear the lights tho

[@ProphetOfIsa]

Lights should clear by themselves or you can disconnect the battery

[@mopar392ta3]

thank you so much brother... mopar for life.. if you want look up our club. it's western Washington modern mopars... on Facebook. Aloha

[@mopar392ta3]

ProphetOfIsa lights are still on even sheet I disconnect the battery. I changed the part that was diagnosed

[@andrewcox9347]

Hey man thanks for the vid looks like an easy swap. I have a 2012 challenger srt8. got the abs and esc lights, sounds like same as you. how did you narrow it down to the front left sensor? code reader?

[@ProphetOfIsa]

Yeah, I bought a 15 dollar bluetooth code scanner off of amazon, its the one at the end of the video

[@Jdmtunerlover]

How did you found one which sensor was bad

[@johnortiz-velez2044]

Thanks if was tremendous help

[@farklestaxbaum4945]

I had my ABS and traction control lights come recently (2013 challenger), checked all the fuses, no codes on the scanner, im pretty sure its a bad wheel speed sensor, but how do I determine which one?

[@ProphetOfIsa]

In my case, a Wheel specific WSS code came up, you may need a more expensive scanner to see that information

[@ItsThatPc]

How do you know which one has went out?

[@arthurleino]

My rear right sensor had a connection supersede for the kind of connection you have. My 2009 has a dual connection going to it. All the new ones are single connection like yours. Mine is old style and cant find any thing about it. Only what part man sez!

[@Conscious1979]

Great video

[@jointglobalceo]

What is the part number I'm trying to find one for my RR wheel speed sensor. I got abs and traction light on error code U140c

[@Bluescoop1]

How did you find out which sensor to change? I bought the same blue obd checker you showed on the video. I am using the torque pro app, did you use a different app?

[@ProphetOfIsa]

The code it gave was specific to which wheel it was

[@King-og4hp]

esp on and abs on and cruise control wont work, is this the reason? i dont have codes for any of them, just tcm codes

[@ProphetOfIsa]

Sometimes the codes don't show up, They were kind of on/off for me. It does sound like the reason for your problem though.

[@King-og4hp]

ProphetOfIsa c1026 lift front and c2116 and c101f

[@bobbyprewett956]

I've got the same problem with my 2013 sxt challenger. Will the Bluetooth scanner you have show which sensor is bad? my dash says system is working ok, and no check engine light. Just have the abs light, and traction control light on, and the cruise won't work. Thanks for uploading this video

[@ProphetOfIsa]

Sounds like the same problem, and yes this code scanner will pick it up, but i've noticed through other comments that using the Torque app on an Android will work the best for this code. Seems that the app you use with these bluetooth scanners is almost more important than the scanner itself. When you get the code and research it it should be wheel specific.

[@jerryhill7296]

$15.00 abs code scanner? I wish I would have found that before I bought the $100.00 one from Harbor Freight. I really want to thank you for going to the trouble of making this video. It is good and right to the point. I do have 3 questions though. Is it always the wheel sensor when you get ABS code, in other words when you pull the code and it tells you its the wheel sensor? Is it always the sensor? Or is it the sensor circuit? I noticed that this car only has 12k on it. My 09 only has 34k, why are we having to deal with this with such low miles?

[@ProphetOfIsa]

+Jerry Hill Yeah, It's s bluetooth scanner that pairs to your phone. No, it's not always the WSS when you get the abs code, it could be the ABS module or any number of quite a few things. In my case, it gave me a code that turned out to be a wheel specific WSS/ABS error code. In my opinion the reason this happens at such little (and random) mileage is that the wheel speed sensors have no gasketing or seal to them. They're just "snugged" onto the hub assembly, which lets water into the sensor area and then rust kind of cakes onto the sensor, not letting it read correctly. a simple crush gasket or o-ring would probably make this a bomb proof fix.

[@deatheffect575]

Can you clean the old sensor?

[@neilpaul7237]

Great work

[@tigerseye73]

Excellent vid. Much appreciated.

[@chrisramsey2366]

very helpful I just need to figure out how to reset the abs light along with the esp/bas and traction control lights

[@ProphetOfIsa]

chris ramsey if you fix the problem the ecu will clear itself

[@chrisramsey2366]

it just went off I just had to drive it past 20 mph I guess so the ecu read the new sensor but thanks again for this video it was really helpful bro

[@korymiller5416]

ProphetOfIsa, Can you please explain how you diagnosed this using the Torque App? I purchased the same ODBII scanner and downloaded the Torque Pro app on my Android. With the ODBII reader paired to my phone and connected to my challenger, I have it check for fault codes and receive a message saying "no fault codes". Is there a special plugin I need to enable? Thank you!

[@ProphetOfIsa]

My car showed me the codes, but it was intermittent in showing me; sometimes it worked other times it didn't. Try using the car's info center on the gauge cluster to read the codes: with the car off and without starting the car, turn the key to the ON position then back to ACC then back to on two more times. It should then display codes near your odometer

[@korymiller5416]

@@ProphetOfIsa Unfortunately, mine is a 2015 with push button start. From what I've been reading, the 2015's and up no longer allow you to pop the button off and start with a key, hence no ability to perform the "key trick". Any other suggestions? Otherwise, I guess I'm going to buy all four wheel sensors, replace one at a time, drive it, and see if I can identify the right one. Dealership wants $99 to diagnose, I can probably purchase all four for less than that.

[@Lemus27]

Thanks for the video, it helped a lot !

[@lifewithricky3522]

What scanner do you recommend to test this problem? I already paid a diagnostic fee with a shop, but for future repairs that'd be beneficial. Thank you, and great video!

[@ProphetOfIsa]

The one in the video is a Panlong bluetooth scanner off of Amazon. Put it with the Torque app on your phone and it works a treat. It's at the end of the video.

[@lifewithricky3522]

Okay cool, thanks ProphetOfIsa!

[@shuoma5303]

After watched your video I'm pretty sure my vehicle is having the same issue. However, when I tried to narrow down which wheel sensor to replace using the code reader, I got no Diagnostic Trouble Codes. How did you manage to find out which sensor is bad?

[@ProphetOfIsa]

+马朔 The code that I got was specific for that wheel. I'd do some googling of the code you have, chances are it is specific to which wheel is messing up. Of course, if you still can't figure it out, replace all of them for ~30-35 dollars

[@shuoma5303]

+ProphetOfIsa It turned out that Dodge changed their implementation of the DTC. I can now read my code using another code reader. But other than wheel sensor code, I got several other codes like ABS module code, Traction Control module code. Did that happen to you too? If so I can start putting my hands on it : )

[@ProphetOfIsa]

I don't think I ever got any traction/ABS module codes through the code scanner, but I did have the abs/trac lights on my dash turn on. I'd still go ahead and change it out, for ~$8 and ten minutes, it's worth it to see.

[@marty303]

Dodge needs to get their shit together. I’m on my 3rd sensor

[@tytantyphlosion2910]

did you TRACTUON CONTROL LIGHT stay on when your old sensors started failing. my traction control is staying on...dry roads or not

[@ProphetOfIsa]

Houndoom yes

[@JerryC25]

This is great thank you. I just bought a 2014 Charger a few days ago and it looks like I have a bad sensor. The traction control and abs light is on full time. I’m also getting a weird sound from what I think is a solenoid in the shifter when I make a turn. Question, how did you know what wheel sensor was bad? Thanks for this video

[@brendacantu4739]

Does anyone know that answer to this question. My challenger is doing the same.

[@JerryC25]

Brenda Cantu you need to stop by a shop and have them check with the diagnostic computer. Takes 5 minutes. They shouldn’t charge you. If they try to, go to another shop.

[@zekayden]

U sometimes can feel the wheel catching that has the bad sensor, it feels like the brakes are being applied and released rapidly to just that wheel

[@dckhosdwn4hrs]

How do you know which sensor is bad?

[@adamrodriguez2553]

whenever your sensor for your car was malfunctioning was your traction control not working at all ? because on my rt whenever i try to take off quickly it burns out for awhile and then goes..btw im 18 years old and im trying to understand what is exactly wrong with my car also thanks for uploading this video its going to be a big help when i fix my sensor

[@ProphetOfIsa]

Yeah, when a wheel sensor is malfunctioning your abs (pulses the brakes when locked up) and your traction control (changes power/ braking to individual wheels to keep traction) stop working as far as I can tell. which is why you're spinning out all the time.

[@speterbilt]

great video. thank you. gotta change mine. how much are the sensors?

[@ProphetOfIsa]

Like 8.99 a piece at Autozone.

[@swayzepop]

in 4:30 the black tab that you push in to pull the sensor out mine isn't there what do I do

[@suburbanbadass6962]

good install vid thx

[@adamrodriguez2553]

was anything else wrong with the cars air charge temperature sensor or throttle body unit cause recently my dodge challenger rt has had the same problem I've tested it and it came back with 4 separate things that might be wrong with the car but i dont know which to fix first

[@ProphetOfIsa]

Nope, nothing else was wrong with it. If you a have a wheel speed sensor code, it'd probably the cheapest to fix. It was under 10 dollars provided you have the tools.

[@Chriselectricfingers]

No need to pull out the red safty pin !! It wil not go back in most times, mines only wanted go in backwards ! But it did click so is locked , i dnt think theres any way for it to get loose , but yea i would nit pull out the RED safty again. Good vid btw . Except for the red safety clamp pulling it all the way OUT , bad move for some . Just sayen .

[@marleymar49]

Great video!

[@trentcarpenter5757]

Might I ask why you decided to pull the safety pin all the way out of the locking connector? Seems unnecessary. I've never had to pull the pin all the way out before.

[@ProphetOfIsa]

Trent Carpenter with my clip, you're right, I didn't have to pull it out. but when I was putting it back in, the clip in it's unlocked state was preventing me from putting the connector back together. may have just been my clip.

[@trentcarpenter5757]

That's strange. I have one of those clips in my engine compartment that doesn't like to come off and I have to get a flat head screw driver under it to pull it off, but I've never had trouble putting it back on...

[@trentcarpenter5757]

So I replaced both front wheel speed sensors on my '10 Charger today, and unlike your car, the connector for the sensor is exposed and not behind the paneling. The female end is pretty much wedged into the wall of the wheel well and the plug is held in with a piece of spring metal that sits over top of the whole connector. I had to pop that piece of spring metal out and just pulled the male end of the sensor out.

[@arthurleino]

I have the ABS light, ESP ,BAS, Traction control and cruise control no work. 2 people with one being a car mechanic tell me this is the problem. How did you figure it was the front?

[@ProphetOfIsa]

The scanner I used gave me a wheel specific code.

[@arthurleino]

The one from my local auto store did too! Right rear speed sensor. On order from Rockauto.com.

[@King-og4hp]

?i have the same problem, but no codes for the speed sensor, did you fix it and how

[@arthurleino]

I changed the right wheel ABS speed sensor and it fixed the problem.

[@King-og4hp]

Art Warmanen new scn show codes c1026,c2116,c101f, i searched for c1026, it show lift front, is that it?

[@kmkstu420]

i have a 08 charger 3.5l v6 and i am having abs issues has well, my question is can the wheel speed sensors engage the rear breaks if it goes bad.?

[@ProphetOfIsa]

No, they can't do anything other than monitor the wheel speed, if they are not working it shuts down abs/esp/traction control. Abs does have an impact on the brakes, but only in a wheel skidding capacity.

[@ProphetOfIsa]

No idea. I mean it could be the WSS, but i think you have some different problem.

[@dastony1969]

great video but i'm trying to figure out the different part numbers for rear right and left sensors

[@autocad3227]

Well your post is 3 years old. I'm doing this to my car tomorrow. I looked on RockAuto and they clearly listed right rear and left rear

[@adamrodriguez2553]

oh really i didnt know that thanks sir for the help and i really appreciate you taking the time to reply to me and help out a fellow challenger owner but if i have any other questions will you be okay to answer them I'd hate to he a bother

[@ProphetOfIsa]

+Adam Rodriguez Sure, just send me a message.

[@jaystepp150]

How can ya tell which sensors gone bad to start with🤷🏼‍♂️

[@ProphetOfIsa]

The code should tell you which wheel.

[@jaystepp150]

Well bummer hoping to avoid going to dealership. Thanks for the help. And video.

[@Jdmtunerlover]

How do u know whichone was the bad one?

[@ProphetOfIsa]

The code the car was throwing said which wheel it was.

[@jayg3069]

Help!! I changed my left right wheel speed sensor on my 2015 sxt plus challenger and now its saying incorrect component abs code c0031-4a. I tried erasing the code but it doesnt erase

[@ProphetOfIsa]

Might be the wrong sensor

[@jayg3069]

Only O’reillys carries them and u have to order them from the manufacturer so i dont think so🧐

[@inkedupred2186]

The bolt that holds the sensor was dry rotted & broke off !! Any ideas on how to get it out?

[@ProphetOfIsa]

Jamon Lipscomb probably going to Have to drill it out or try a stripped screw remover bit. Or I suppose you could epoxy it to the hub, your mechanic would frown upon that though but it would work lol

[@inkedupred2186]

Ok thanks man i'll try to drill it out later on today lol

[@kornstory]

How do I know which tire? Is it the front left?

[@ProphetOfIsa]

A decent code scanner should tell you specifically which wheel speed sensor is causing the issue

[@GangstaFiedEnt]

How did you figure out which sensors were defected ?

[@ProphetOfIsa]

The code it throws is wheel specific, at least it was for me

[@DubEuro]

Great video. Thank you

[@XzFIGUEROAzX]

Thax you hope this is the problemon my car dodge charger 2010

[@desireejohnson8877]

I need help do that have some to do with the power steering i need them wires my wheel hard to turn

[@ProphetOfIsa]

Desiree Johnson this has nothing to do with power steering

[@waqi2329]

This video really helped me out ThumbsUpp,appreciate it :) (Y)

[@O4OTIS]

How do I know which one is out? Car won't shit out of 1st gear to get to a dealership

[@ProphetOfIsa]

Find someone with a good scanner. The one I used was wheel specific. People here have said that some part stores have scanners that will tell you as well.

[@813Productions]

You may be in limp mode if your car won't get put of 1st gear. Search it up online since there many different reasons why it happens. When it happened to me my battery was low/about dead but it can happen in other instances as well.

[@jointglobalceo]

or the solenoid thing in the shifter

[@laddtucker]

Great video, thank you! I wish I had more sense to troubleshoot this from the start. My dealer charged me $290 to replace the front left wheel sensor!! Then the signals flashed up again 48 hours later. I went by autozone and they couldn't pull a code, so I bought the code reader you bought, except the one for IOS and used cardoctor. It couldn't find any codes stored. So I went back to the dealership, and he found the stored code. It was the other wheel sensor, on the back left. Any advice on using the code reader from amazon? Do I need to use a different app? It's a 2013 dodge charger. I am definitely going to replace this one myself, but I was wondering how to read the codes. If I need a paid app, that's fine, I just want to make sure it will work before I pay for it. The lights for the back wheel came on only briefly and cut off. I happened to have the code reader connected, and it read U0002 which is high speed CAN communication Bus Performance. Google didn't reveal anything about that code relevant to a wheel sensor though.

[@ProphetOfIsa]

I don't know anything about a U0002 code, but if you have a suspicion about it being a WSS, I'd probably replace the other three and double check the other one, it'll cost you 40 bucks and an afternoon, but beats 290 a wheel. As for an app on IOS, I use OBD fusion now, (Switched from Android to Iphone) and it seems to work very similar to Torque.

[@Jabe213]

Hey I changed the abs senor but the lights and everything still on!

[@cdubboy225]

U ever got if fixed or what was the problem?

[@JettaGli08]

Do you have a link we’re you bought the part

[@tcole6216]

I just got one yesterday. $30 at the dealer

[@JettaGli08]

T Cole ok thanks I just changed mine but the lights didn’t come off? You think I need to reset it?

[@tcole6216]

You may need to. Once I replaced my senor and reconnected the battery my lights were gone.

[@JettaGli08]

So I bought mine from our local auto parts and it didn’t work, my buddy tried to erase the code but it stayed on so he told me that I needed to buy the sensor from the dodge dealer 😏

[@JPB357]

does this work with the Dodge Journeys

[@ProphetOfIsa]

Chances are this is very similar or the same on all of Dodge's vehicles. Take a wheel off and look to see if it's the same.

[@JPB357]

OK thanks for get back to me I do that thank so much

[@jabadam2002]

The same sensor have Chrysler 300 2012 .I change those sensors 2 weeks ago in my car , cost only 20 $ pair front in Auto zone

[@jointglobalceo]

What is the part number?

[@jabadam2002]

Autozone .Part # SU14249DUralast Brake Sensor ABA , Price $8.99 + tax ( for One) same Front driver or pass side

[@jabadam2002]

SU14249

[@jasonmeyers9413]

How can you tell what one is bad

[@ProphetOfIsa]

It had a wheel specific OBD code

[@ryanfortin8854]

@@ProphetOfIsa did you buy the full version of the app? I forget what code I got but it was just like a low voltage code

[@carlosaenz88]

hey I have the same problem on the exact same abs sensor.. (driver front side) , but it's stuck and won't come out.. what should I do?? any suggestions?

[@ProphetOfIsa]

carlosaenz88 tap on it gently and wiggle it with pliers. Id stay away from using penetrating oils

[@carlosaenz88]

ProphetOfIsa OK.. should I worry about breaking it.. I have the new one. but I don't want to have to take off the whole axle just because it's broken

[@ProphetOfIsa]

carlosaenz88 they seem fairly sturdy and not hollow, so I think you'll be okay, just don't reef on it too hard

[@carlosaenz88]

ProphetOfIsa I'll keep you posted

[@errandsunlimited1276]

Lol I am a woman and you make me believe I can do this lol

[@ProphetOfIsa]

Errands Unlimited you could! Taking the tire off is the hardest part to this

[@xx7796]

Thanks

[@alteredego8399]

Got a Dodge Charger with 52k miles now. To anyone considering a dodge vehicle just don't do it! It's nothing but problems, cheap interior parts and everyday you just pray your not running into another issue. I have had to replace the wheel sensors twice now in under 10k miles. I was dumb enough to let the stealer ship Charge me almost 200 dollars for a 10-30 dollar fix. Now I have this weird ticking noise coming out of my shift box in the center console when I turn or hit the brake on low Rpms. If you like shit failing every other day by all means get a dodge. If your miles are racking up I recommend getting rid of the car ASAP before something major malfunctions. To say my accord never ever gave me issues, American cars are a gamble and expensive to repair. It really does not surprise me one bit that all dodge makes and models all have issues with abs and traction control. I though it was just me but it doesn't seem that way

[@ghostbusterstoragefacility3904]

R/T Oz Obviously you are buying used cars that you can only afford. Ford chevy or any other make and model have sensors that are meant to keep people spending money. In your case you need a 65 model vehicle with no computer sensors. Welcome to earth stupid

[@RandomVids519]

The rad was just done in my rt charger and now the abs fml lol

[@lillianhuston348]

I'm trying to buy the parts to replace it from rock auto. Rock auto shows me the option for the rear ones with heavy duty breaks or without breaks and I'm not sure which part to get. The sensor with or without heavy duty breaks. I've attached the link to Rock auto parts for this, can anyone tell me which one I should be buying? (I'm going to replace all 4) www.rockauto.com/en/catalog/dodge,2012,challenger,3.6l+v6,1502177,brake+&+wheel+hub,abs+wheel+speed+sensor,1912 Any help is appreciated. Thanks guys.

[@ProphetOfIsa]

Lillian Huston the heavy brakes is the upgraded srt brakes. So a normal v6 challenger will not have the heavy brake sensor. Part numbers for the v6 are 4779642AC for rear right and 4779643AD for rear left

[@WPGinterceptor460Interceptor]

ROCKAUTO has the cheapest priced sensors!!!! 15-20$

[@jointglobalceo]

what is the part number

[@WPGinterceptor460Interceptor]

look it up rockauto.com

[@MoCityBeau]

what is the puroose of a wheel speed indicator besides annoying the fuck out of people? i see every one with abs/esp brake light problems on these cars

[@mrnomad55]

This is the wong part. It does not reconize this as a compatable part. I went to the dealer because this device you have dose not read the abs code. This part will not work because its not reconized as an OEM part.

[@ProphetOfIsa]

It works and has been working in the years since this video.

[@davidjonburke2729]

Dodge makes Junk cars ive had my sensor replaced every 10,000 miles or so

[@jalanidamu5774]

I blame carwashes tbh. That's when mine acts up

[@jimbradley727]

Huh..

[@THERIPPER216]

How do you know which one to replace?

[@theclephane2914]

Great video!