how to change trailer hubs

[@edgarrodriguez5913]

Thanks for the video it help me with my trailer thanks 👍

[@massis32210]

Thank you so much for watching I appreciate it.

[@slimetimefishing4782]

only thing id do different is add more grease before putting that dust cap,good video man,im from jacksonville fl!

[@massis32210]

Thank you for the the comment I appreciate it I did live in Jacksonville but unfortunately because of the crime I abandoned the city and moved out into the country

[@jonlittle346]

Really like the film, very helpful. Hope to watch you do more.

[@stevanrose7439]

A little to much jabber. But very informative thanks for the video. I have a tilt trailer that I built and want to convert the hubs to get away from trailer house rims and their wancky tire size. Once again thank you.

[@massis32210]

Thank you so much for watching I appreciate it.

[@mguerramd]

I put anti-seize compound on the studs before placing the lug nuts. This can save you from a serious PIA on the side of the road in the middle of nowhere!

[@massis32210]

That's an awesome idea, I appreciate sharing it with everybody thank you so much.

[@gusd164]

Loo

[@lachiethomas5810]

Top video mate. Greetings from Victoria Australia.

[@massis32210]

Thanks for watching greetings from Florida

[@techrfun]

Why didn't you polish up the spindle with emory cloth? The Seal will never last on that spindle.

[@massis32210]

It was clean enough and believe it or not the trailers ran since this video was done with no issues thanks for watching

[@jonlittle346]

shared you on my f.b. acct. Good job. enjoyed.

[@massis32210]

Thank you so much for sharing my channel I have a lot more videos coming up in the new shop and around the new property hopefully it will stay tuned

[@adamtedrick4224]

You didnt show how the seal goes on.

[@massis32210]

On these hubs everything was ready to go I didn't have to install anything just mount it to the axle thanks so much for watching

[@manindabox69]

You're missing the outer grease seal.

[@massis32210]

It might appear that way but everything was in there thanks for watching

[@GregsShop]

@@massis32210 I just bought the same kit. Mine came with a loose grease seal. Instructions don’t show where it goes. The inner grease seal was already broken in place. Does the loose one go on the outside after the nut and washer then put the cap on?

[@massis32210]

@@GregsShop if I remember right there should be an outer grease seal that goes on the axle first to the hub and I don't honestly recall but I doubt there's an outer grease seal I think just the washer then the nut.

[@GregsShop]

@@massis32210 thanks for getting back to me. I’m probably overthinking this like I do everything else.

[@sayshuh]

Hey man, Thanks for the video. Could you please tell me what kind of hub is that? Looks like a MH type of wheel.Thanks again. Terry

[@massis32210]

T. L. Not sure what kind of hub off hand it was off the shelf at Northern Tool thanks for watching

[@garywheeler2055]

Thanks, about to do the same job and this helps a lot.

[@massis32210]

Thank you so much for watching

[@jeffhorn9237]

thanks, I'm ready to go now.

[@massis32210]

Thanks for watching...

[@vikingored7469]

So you replace an old hub that was cracked and broken with a new hub that was cracked and broken. That don't make no sense why out something broken to replace something that is all ready broken they only cost 44 new online.

[@massis32210]

I would have to disagree with you, the old hub was pooched for sure and not knowing the condition of course I'm going to replace it. But how is the new one cracked it was brand new out of a kit? If you could find at any point in my video where that new hub is cracked you please point that out cuz now you got me interested this video's been out for a very long time.

[@adamtedrick4224]

Mine is 1-1/16 hub advance auto

[@sammontalvo8904]

Dude, what's the point of doing this video for beginners if you already have the damn hub already disassembled! Do the shit over in detail. Smh.

[@massis32210]

The point of the video was instructional how to a lot of people are not very mechanically inclined this is why I created a video to show people how easy it is to just swap out hubs thanks for watching