How to Change Transmission Fluid & Filter on a Mercedes | ML55 | W163

How to Change Transmission Fluid & Filter on a Mercedes | ML55 | W163 Mercedes Transmission Filter & Oil change
Year 2002 | ML55
ATP B-217 Automatic Transmission Filter Kit - amzn.to/2iocClP
www.wikihow.com...
BLAU F2A1501-P Mercedes ML55 AMG ATF Automatic Transmission Fluid Filter Kit - 2000-03 w/ 5 Speed Automatic - amzn.to/2hB78Vr
Pentosin 1088206 ATF 1 Transmission Fluid, 5 L - amzn.to/2ielnhX
Pentosin (ATF1-10L) SAE 75W Transmission Fluid - 10 Liter 1058206 - amzn.to/2iL6QHz
Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. - amzn.to/2iL8edc
CRC Brakleen Brake Parts Cleaner - Non-Flammable - amzn.to/2iemlKV
Heavy Duty Wheel Chocks - amzn.to/2qpRegc
"PLEASE DRAIN YOUR OLD TRANSMISSION FLUID BY opening Drain Plug which is located right in the middle of PAN".
The reason I couldn't do it because my DRAIN PLUG Torque was too tight. I was going to change the filter and gasket anyway so I didn't bother too much and went ahead and opened the whole PAN and drained the fluid.
Thanks for watching, Enjoy, and please don't forget to: LIKE, COMMENT, FAVORITE, SHARE and SUBSCRIBE.
Please SUBSCRIBE, If you haven't done so yet, take a look around. If you like what you see be sure to Subscribe to be notified when new content is posted. Thanks again for visiting!
Easy Steps easysteps.jimdo...
{This video is for educational purposes only, I am NOT a "Professional Licensed/Certified Mechanic" or "Professional Licensed/Certified Technician" and I am not Liable/Responsible in any way for damages caused to YOU or your "Vehicle" or "Computer/Phone" due to this video}. Please leave your comments below if you have any questions or concerns. Hope this helps someone out there. Cheers!
*Disclaimer: All information is for educational purposes only and is the personal view of the author.

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzbin.info

[@12345678924154156]

How good of a idea was to to the trans fluid change? Mine ahas 120000 on the clock and I've heard that if I didn't do it at 50000 shouldn't bc I will dame the transmission

[@awsomeal100]

Drain The Fluid Through The Drain Plug Hole..(That is what It Is There For).....Then Release The Pan.....Clean It Of Any Crap With Lint Free Cloth.....Change Filter...Put Back On With New Gasket....A Lot Less Of A Mess....Simples.

[@ephatla58]

That works if the car is level. If the front is jacked up then slot of the fluid is after of the drain anyway.

[@carolglasbyhomes1581]

You did a great job explaining the process and the camera angle was good so I could see. I think I can actually do this myself as a 63 year old woman. I love to fix things. Thank you.

[@kchilz32]

Carol Glasby Homes amazing 😉

[@Johnathan_Waters]

Don't forget to record and post it here!

[@sayanniyaziev3833]

What i love about the Mercedes models designed in the early 90s or the early 2000 is that a man can work very easy on the technical stuff as well the mechanical. Very simple made and reliable cars. Now, the new models after 2008-10, the MB cars are so complicated to work on them... its like a pickle on the ass. Very nice video and i've changed the transmission oil on my ML at home. For sure you can save couple hundred of euros without going to the Car Service.

[@triantafillosmountziaris4697]

You can use your fluid extractor to remove about 4 quarts of transmission fluid by sucking it out from the transmission dipstick hole. This takes minutes and if you measure the fluid and replace it with the same amount, by pouring fresh fluid slowly using a narrow neck funnel through the same hole, your transmission will be happy. Remember that there is fluid in the torque converter that will not be removed by this method (or by simply draining the transmission from underneath the SUV without flushing the torque converter). But, you can repeat the fluid exchange process by sucking fluid out of the dipstick hole a couple of times after driving the SUV for a few miles in between (or running the engine and manually shifting through the gears while constantly stepping on the brake, of course). This repeated fluid exchange will renew most of the transmission fluid by dilution. The fluid you need for each exchange costs less than $30 (make sure you use the approved grade for your MB). You will be fine for the lifetime of the SUV if you do this every 3-4 years without replacing the filter. However, if your transmission has been neglected for many years and does not shift smoothly you may need to replace the filter and flush all the fluid from it (including the fluid in the torque converter). But, I would still try the fluid exchange method even in that case before opening the transmission and doing more costly and messy repairs.

[@horacesawyer2487]

Fluid exchange sounds good to me.

[@user-xu5eu8po7f]

I am thinking to do it your way without flush. I just worry about mixing old fluid with new one. I am planning to get the OEM fluid, but I don’t know the brand of the old fluid (I bought the car recently). Do you have opinion?

[@cowboy_broke]

your videos are great I have 03 ML500 and all your steps are correct!

[@RobertMarshall]

I've got a 03 ML500 as well, and will be doing this in the next few weeks sometime. To confirm, there is no drain plug on the torque converter on our model vehicle? Did you run a flush at all? ATF is so expensive, and I hate the thought of using all that new fluid just to dump it out a few minutes later.

[@AmaefuleCJJPChamberline-cc4cl]

2:30 how to fix new

[@AmaefuleCJJPChamberline-cc4cl]

Amwell gearbox how to fix new fibre that burn damage forever remove

[@AmaefuleCJJPChamberline-cc4cl]

How do I know how to replace the 55 back to the automatic transmission

[@AmaefuleCJJPChamberline-cc4cl]

How do I know to change the fibre that bond inside the automatic gearbox and we'll

[@Playingbyear]

Why not drain the oil from the drain plug first? Surely less messy? I'm going to do this on my Father in Law's ML430. Cheers!

[@sho7600]

??? drain plug?

[@awsomeal100]

Do You Know Where The Steering Wheel Is?.....Good......Now Get In It And F....Off.....Straight On...Through The Sign That Says ....STOP...CLIFF AHEAD!!

[@zappedbylife7058]

Great video

[@EasySteps_Sidhu]

Thanks! Great to hear! 😊 glad to help. Thank you so much for the like and thanks for watching.🙏

[@peepstermb8]

Very helpful video Thank you

[@EasySteps_Sidhu]

Glad you liked it! 😊 glad to help. Thank you so much for the like and thanks for watching.🙏🙌

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzbin.info

[@christophereric7]

I can't find exactly what fluid I have to buy for my ML320 1998. Can you point me to it? This video helped a lot.

[@EasySteps_Sidhu]

amzn.to/3DZ5TGf Glad it helped! Thank you. Please share, thanks.🙏 Thanks for the like and thanks for watching,.🙏

[@epatias]

Excellent!!!

[@ash4pm]

Thanks very much for posting - very useful.

[@dlwst44]

You totally forgot the drain plug, 5mm hex key. Wouldve made it way easier. Also, if you dont disconnect the line and flush out old fluid, this just mixes old with new. Newer than 2000 doesnt have drain plug on torque converter to get all the fluid out.

[@hdidane00]

not really. even if he drains the torque converter out the drain plug there is still plenty left in the oil cooler and lines. it needs to be flushed that's the only way to get it all out and replaced with new fluid. otherwise u just mixing old and new fluid which is a waste.

[@awsomeal100]

@@hdidane00 Mercedes Advise Not To Drain Torque Converter And Just Drain Pan And Change Filter And Gasket.... As They Do At The Dealership On A Service..........Prevents Risk Of Transmission Slip ...Pound To A Penny You'll Get Slip Doing A Complete Flush On One..Just Keep It Reasonably Healthy With A Pan Drain And Refill ( Exact Same Amount That Came Out To Go Back In) So Make A Note Of It)....Obviously Check That Level Is Correct Before Starting With Trans Dipstick (Available From Ebay...If You Find You Need To Top Up After Putting Pan Back On..Just Put Small Funnel Into Dipstick Hole And Pour In Carefully To Get Correct Level..Correct Level Is Crucial....For Correct Performance.

[@lad63bird]

@@awsomeal100 I concure, dealer recommened service procedure, do not wipe off valve body! Do not drain torque convertor! this is a drain and fill procedure. Bmw x5's are not even suppose to be changed EVER!. But just like BMW;s 15,000 mile between oil change recommendation, I think they just want lots of timing chain and transmission service calls...Thsy knew they built them too good. I have changed my BMW 2004 x5 engine oil every 6 months and have not had one engine mechanical issue in 16 years and 211,000 miles!!!!

[@tim080775]

do you know how many quarts of old for ml320 ?

[@dlwst44]

@@tim080775 about 2 quarts if you just drain the pan. Get a top side oil extractor and just do it when you change oil for about 2 or 3 times until the fluid looks clean.

[@BAD_CONSUMER]

why on earth would you not drain it before taking off the pan

[@Venx2ss]

What did he add to the atf fuild

[@nationalistjanataparty9282]

Great information thank you

[@adiness]

How much of the transmission fluid does it take? I'm planing on changing it on my 01 ML55. Thanks

[@Playingbyear]

Or....you could drain the transmission fluid through the drain plug....

[@EasySteps_Sidhu]

Yes, sure you can. Thanks, glad to help. Thank you so much for the like and thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance.🙌 kzbin.info

[@MURDER_LAB_RECORDS]

Yup

[@DIYDharma]

I'm curious as to why you did not use Mobil 1 Synthetic Gear oil as MB recommends. Is Valvoline better?

[@kchilz32]

Easy Steps I was told I couldn't use Maxx life for my 2002 Mercedes ml320

[@youtuberAstar]

HEAYA...... Why not undo the drain plug !! You can clearly see it on the bottom of the pan you are removing. Makes things a great deal easier and cleaner. It is even the same size tool you are using to remove the pan itself !! DAAAAH. Still a helpful video. Thank you :)

[@user-xu5eu8po7f]

I was looking for the very last steps after filling the new fluid...did you turn the car on and shift the gear back and fourth while the car was still front jacked on the ramps?

[@EasySteps_Sidhu]

Not on the ramps, but did it once it was leveled on the floor. Thanks for watching.🙏

[@user-xu5eu8po7f]

@@EasySteps_Sidhu how did you manage to get the car down? did you push it down manually? was the gear on the P or N? thanks for answering

[@EasySteps_Sidhu]

N then push it down from the ramp.

[@gk_filer]

Should have been a magnet in the pan?

[@imaslowlerner]

This guy really know what he's doing, makes it look so simple and the explanation in simple English. Really takes away the fear of owning a Mercedes.

[@jorgeperez4235]

What was that additive you put in your transmission fluid or was it just more fluid??

[@EasySteps_Sidhu]

Thanks for asking and thanks for watching. I always list under the description, I will copy & paste it for you - Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. - amzn.to/2iL8edc Good luck with your DIY project.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@cowboy_broke]

except the drain plug

[@drglover31]

Did you measure the amount of fluid drained and replace the same amount?

[@EasySteps_Sidhu]

Yes, that's the best way to do it. Thanks for watching, good luck with your DIY project.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@leebateman8705]

Thanks.. Nice Lights BTW!!

[@KimHjalmarsson]

I have a W163 (ML 320, 2000) but how often do you need to flush the transmission fluid and change the filter? Bought mine used so no idea when it's been done last time. I know I have to do an oil change and filter change in a few 1000 miles but this is sort of new to me.

[@tydwill2009]

Very good video!

[@ianhudson7350]

You should let us see your dog. He's giving out information I need to know.

[@EasySteps_Sidhu]

lol...

[@frankangermann6460]

There is a screw to drain the pan... not flushed the intercooler for the transmission oil, and not checked the level of At-fluid properly...

[@FlowVFM]

I have an w163 400cdi and do you know how much fluid goes at change or \i just have to measure how much i drain fallowing your steps? what about the torque converter, do you changed it as well? how often it has to be changed? thanks

[@dirtlint8311]

please do more diff maintenance item

[@jayvirtusio1081]

Thanks!!

[@EasySteps_Sidhu]

Welcome! Glad it was helpful! Thank you! 😊😊. Thank you so much for the like and thanks for watching.🙏🙌

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzbin.info

[@jivkoroumenov6420]

Hello there is plugs to drain the oil Hello

[@lalo2641]

How many quarts?

[@jenniferschaefer4320]

How do you change transmission fluid filter and gasket 2015 glk blue tec twin diesel

[@javierm9010]

Don't you need to know how may pounds tied ? And desconet the battery ? And put energy on the cigarette connecter ?

[@sandibill2233]

U can used the middle oil nut to oil

[@AmaefuleCJJPChamberline-cc4cl]

Mercedes ML 320 how to replace fibre

[@AmaefuleCJJPChamberline-cc4cl]

Por Play by video

[@AnimalGuide223]

Great videos. How do I remove the transmission line cap on s 2000 ml55 amg?

[@ParthPatel-zy4pg]

lol thanks him but doesn't answer his question....you pry it off with a screwdriver!

[@Rockmonster_Miami]

Wish my 06 ml350 was easy to add fluid. 😪 .

[@worldpeace5853]

A few things that I noted but not sure if it’s applicable to this SUV model since mine is W166/2012 ML350 4Matic. The temperature has to reach 45 degree Celsius after you put at least 4 quarts and start the vehicle. You will then need to shift the gears to drive, reverse and park. Finally need to put some more and make sure there is no more drain to make sure enough fluid has been sucked inside and it doesn’t need anymore which may be anywhere from 4.5 to 6 liters/quarts. The question I had though is since I am yet to start this on my own do you put the fluid from the bonnet or do you use the pump from within since all videos show the fluid being pumped from the bottom?

[@EasySteps_Sidhu]

I tried my best to show very clearly in the video the location to add fluid, I am sure you fast forward the video and skipped it. Please check it at kzbin.info/www/bejne/f3uuaa2Zndh7gbc Thanks for watching it.

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my 2nd channel, thanks in advance.🙌 🙏 🙌 kzbin.info

[@slpip4365]

Drain the fluid with the drain plug first so that you won't spill the fluid on your head before you lose the pan screws.

[@EasySteps_Sidhu]

Thanks for sharing the info. and thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance.🙌 🙏 🙌 kzbin.info

[@parwezbussun7212]

I need to change for ml350 yr 2013

[@EasySteps_Sidhu]

I did oil change a video for ML350 and never got a chance to post it. The procedure is pretty similar, thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzbin.info

[@lordmaximus4602]

I miss my ml55 AMG

[@Shermieee]

it is the same for a 1999?

[@charles12973]

I think there is a drain plug to make it easier to drain the fluid

[@sixfoursoul2538]

He probably just didnt have the T wrench ... no biggie

[@cyronader]

hey I am about to transmission fluid and filter change. I bought Titan 3353 fluid MB-Approval 236.12 and Mann filter. I am concerned that the Mann filter and gasket is made in china......

[@robertvanruyssevelt7159]

Why?

[@hdidane00]

Wrong way guys. it needs to be flushed otherwise you are just mixing old fluid with new fluid.

[@codeseven7057]

How did you know how much fluid to add?

[@sebastien5461]

Easy Steps and you can check the level of oil?

[@vhlaserdude]

Thanks for the video but one question, you use the Valvoline maxlife but in the description, you say use the Pentosin atf. Did you have an issue with the Valvoline? Why use one then say use something else?

[@allendomanski]

Al Domanski Thanks for the reply. FYI the Valvoline maxlife multi-vehicle product information sheet claims to meet Mercedes-Benz ATF requirements for 72 2.6 transmission. The product is not endorsed by Mercedes-Benz. Purists can you use the product in your description without fail according to Mercedes-Benz. My truck has 200,000 miles on it. I'm going to go with the Valvoline. Cheers

[@ranat5526]

Gearbox was having a Shave but you could have used the drain plug first.

[@EasySteps_Sidhu]

Thanks for sharing info. Thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@jusgaa]

where there was a magnet on the oil sump??

[@EasySteps_Sidhu]

You will find it in the engine oil pan, you don't have it in a transmission pan. All the metal saving gets collected with the transmission filter. Hope it helps, thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@aymenhager1035]

where did u get your headlight from

[@aymenhager1035]

i did not find it plz give me the link here

[@lalo2641]

Thanks got a 2003 sport ml320 can I put a newer engine?

[@EasySteps_Sidhu]

That is a LOT of work and if you can do it then why not. Good luck with your DIY project, thanks for watching.

[@lalo2641]

@@EasySteps_Sidhu thanks

[@EasySteps_Sidhu]

You are most welcome.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@ismaelabbas]

where did you buy those headlights from?

[@ismaelabbas]

+Easy Steps the ones showin in this video..on the w163.

[@ismaelabbas]

+Easy Steps thanks man

[@lalo2641]

👍

[@EasySteps_Sidhu]

Thanks, glad to help. Thank you so much for the like and thanks for watching.🙏🙌

[@darkvador818]

👌👌👌merci

[@wnicklas]

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@dereckjtbear2175]

WTF, You need drain the pan first dude.. What mess..!!! 👎

[@cyronader]

You didn't flush the transmission?

[@MsShoaib123]

What day would you be uploading it

[@kchilz32]

cyronader Mercedes doesn't recommend the flush, just drain. And fill

[@katerinaathanasopoulou7924]

clueless

[@jacklamata2544]

What a mess man... drug the fluid through the small plug, that's why he's there! You have to drain the oil two times to have at least 65-70% new oil in the transmission! First time just oil changing without filters and other stuff, drive 10 miles, 2 time, change al the kit!and the oil level hast to be majored with the engine on!

[@nererivera1720]

NOT THAT WELL DONE

[@EasySteps_Sidhu]

Thank you so much for the like and thanks for watching, I always do answer to my viewers for their every question. Unfortunately, my account got hacked and this hacker has deleted all my comments from 1800 + videos. I am posting a thanks message to my viewers/subscribers for their support. My KZbin channel was hacked/hijacked on (4/24/2019) and I got it back now (5/5/2019). The hacker has deleted the information under the description of my videos as well as all my comments. My KZbin Account Got Hacked - kzbin.info/www/bejne/Z6mvdpafha-kos0