How To Change Voopoo Drag Coil | PnP Pods [3 Minute Tutorial]

[@misstrue1000]

I have no idea the difference between the different kinds of PnP coils. Do you know which PnP coil is best for a drag 4?

[@flashcraft]

Thank you, I didn't know the coil didn't set all the way down. I connected the top to the bottom and it worked perfectly. I didn't wait long enough though and got a throatful of nasty burnt cotton smoke, yuck.

[@browneyedqueen2010]

Pro tip- if you find your new coil not fitting or moving around too much get the tip off the old coil and put it on the new one. It will fit perfectly and will no longer move around. He didn’t mention it in the video and it took me almost an hour to think of it so I thought I’d save you guys some time.

[@husseinali5856]

Great tip, thanks👍

[@jasonmalice]

Do you need to change both the coil and tank, or just the coil? Thank you.

[@markchisholm1856]

Thanks I tried to fill the tank without the coil and ended up with liquid all over lol didn’t realise the coil wasn’t installed and it wasn’t magnetic! So this video has really helped thanks

[@JohnnyRebKy]

I got a new coil for mine and it won’t go in ?? It’s slightly to big 🤷🏼‍♂️

[@joeproductions5940]

I usually refill my juice right before it hits the coil. Coil is still white & it’s been almost a month. Is that good or bad ? Honest truth.

[@xxfocusstxx]

Which coil is that as I have the drag 4? 😊

[@dphipps3631]

Nice one fella. I've been trying to unscrew mine for a few 10 minutes. So I decided I needed divene intervention. I wouldn't mind, I've been using it for a year. To many brain cells been destroyed. 😮

[@cerievans4941]

How long should you leave your coil to soak in the liquid? My book said 5 mins but my coils arnt lasting a day!

[@Dgreger6]

15 - 20 min is a normal time to let the liquid soak into the coil.

[@jackiehaggarty4907]

Could you have the camera be even farther away from the coil and tank!!?

[@Coldhearted23]

❤ appreciate it

[@ANJALISHARMA-vf9zd]

Can we use pnp coil on this ?

[@spockwatch9711]

Your videos are really well done - thanks!

[@Dudeeeeeeeeeeee]

Can anyone tell me which tank and coil is suitable for drag max?😊

[@Coldhearted23]

They where discontinued. You probably will have to switch to a drag 3 and it's pretty much the same vape. Max drag takes a VM5 0.2 OR VM6 0.15 those are the small coils with the red strip at the bottom. 🍀

[@mikewinslow5519]

Any tricks to swapping a coil when tank is full??? Juice pours out everywhere.

[@hugoromeyn4582]

That's impossible with this system so you have to find a way to get the liquid out first.

[@annaehs]

vape that shit out lol

[@bbwiebz3994]

Find a rubber cap that fits snug over mouth piece. Turn it upside down, swap coil slowly, tip it back right way, you loose minimal juice, just the lil bit between coil n mouth piece. Make sure tank not full to the brim so it don't overflow as you put new coil in. Absolute full tank also will risk leaking as pressure builds from the liquid warming up n need to go somewhere. 80 percent of tank is good amount to fill. The other 20 percent allows expansion. Hope that makes sense

[@Aubree360]

My pnp-x tank is leaking from somewhere. I've wasted so much fluid

[@СкрипкаСтрадивари-ж9з]

Подтекает он из-за испарителя. Выньте испаритель, снимите нижний уплотнитель (oring), намотайте немного фум ленты или обычными нитками и установите уплотнитель (oring) на место. Протечки больше не будет. Либо ищите в магазинах более плотные уплотнители, которые подойдут для вашего испарителя.

[@audeemarcbuzon6622]

I don’t know what happened but my coil is too hard to pull.. please advise

[@charisma-hornum-fries]

Mine too.😢

[@KaydensPops]

Ever since i got mine it taste real burnt like metallic taste. Changed coils primed them properly

[@debbie1111973]

Voopoo reneged on their 90 day warranty