How To Change Smok Nord 4 Coil - [IDIOT PROOF]

[@westleehouser8027]

Okay, but how do you get it to stop leaking??? My nord 4 is brand new and it leaks nonstop

[@jadanfr]

Year late but, it could be the seal on the pod where you put juice into, or your coil isn’t all the way in. And depending on how old your coil is once you use it for so long it starts to leak. Just from personal experience i could be wrong.

[@bigsky445]

Thank you for the review. I watched the Documentary "Vaping Demystified" here on KZbin. Its about half hour long & completely changed my opinion in vaping. It proved that vaping is 95% less harmful than cigarettes! I've been smoking for 16 years, half of my life 🚬 Just ordered the Smok Nord 4. Never vaped before! It will be here Friday. Quiting smoking Saturday! Very excited! Thank for for reviewing Smok Nord 4!

[@jlswickhaber]

Best to you! I smoked for 35 years and stopped 7 years ago with vaping! I still vape and know if I didn't I would highly likely go back to smoking. Key for me was having a device that was easy to operate in the beginning (and now too lol) and good tasting eliquid. Wish you much success, hope it's going well for you.

[@bigsky445]

@@jlswickhaber thats amazing! 35 years! Thank you so much! Been 2 months today that I quit smoking & started vaping!

[@jlswickhaber]

@@bigsky445 good job!! I was pretty shocked at how easy it was to quit smoking with vaping! 9 years now for me that I've quit, best to you!

[@chrisbuckley1785]

Are you still smoke free?

[@noahzuniga2079]

I have a nord 4 and i am using rpm coil mesh.04 and the juice leaks out when i fill it. The coil is inserted correctly like in the video. I tried testing it and got a mouthful of juice.

[@Dr.Akakia]

Sometimes when i use my nord 4 i notice some juices leaked out outside coil i fited coil well , do u know why?

[@Seasideboy1]

Guys, I think I need to watch this video a few times more, in order to properly understand. I am still an absolute novice when it comes to Vaping, and I just got my SMOK Nord 4 80 watt device. I guess we are a wee bit delayed here in Durban, South Africa. LOL.

[@dankkitty7226]

Any tips on cleaning? Not finding much on cleaning besides earlier models

[@Dezzu9]

I have 0.16 rpm 2 coil and i cant pull coil in cartridge what should i do ?

[@ohoto3896]

So I recently replaced the original coil in an rpm 2 pod. I aligned/inserted it it exactly as the original, and heard a satisfying "CLICK" when it went in. A few hours later, I wake up and the the 75% volume of juice I put in had completely leaked out. I cleaned it up, replaced it again. Same thing. Hoping it's just a faulty pod. I'm never buying a system like this again. I don't see what's wrong with the tried and true screw in coils from other systems.. any advice would be appreciated though

[@BubbleKushHigh]

Same is happening for me. I had the original coil in for 2 weeks, it was fine. Time came to change and I popped in a replacement rpm .4 coil and it went further in than the original and leaked juice everywhere. It also reads "no atomizer" which leads me to think it's the wrong coil size? The store I bought my vape from sold me the coils the same day. Super frustrating.

[@thecenglish]

ı have the same device and ım trying to use quartz 1.2 coil ı do everything like how you done it it still says no atomizer but when ı try it with the default ones that they have sent there is no problem can you olease help

[@nottinghill7314]

hi. i have this and i use the rpm coils but for some reason it keeps leaking out and getting into the actual vape part and i'm not sure why

[@b777x5]

It's so annoying.

[@crcagri960]

got new liquid and coil and it sounds like it’s bubbling if you can understand any fixes?

[@levismith2663]

Yo so I need sum help I have the nord 4 and the ohms says it's too high and I'm tryna change it but it won't let me idk what to do I've tried searching it up on yt but can't find anything that'll help

[@liv-jewel1603]

if I bought new coils and placed then in the cartridge and they taste burnt what would be the cause of that? would it be not enough juice, didnt let it sit or the vape itself isnt charged?

[@K1LLADELPH1A-_-]

You didn't let the coil sit long enough to get vape juice into the cotton long enough or what's known as prime the coil. You can either let it sit for 15 or so minutes or like most just take a few big inhails to get it into the cotton faster. Either way will work pretty well. It's the worst tasting them coils 😂

[@clarkjasperhernandez3346]

Whats the best coil resistance to buy if youre flavor chasing?

[@Nhmusicoffish]

0.4 ohm mesh. Flavors phenomenal and it’s meant for longevity

[@K1LLADELPH1A-_-]

Mesh coils for sure

[@komradkyle]

Are you supposed to prime the coil on the other side too?

[@K1LLADELPH1A-_-]

I def would once it's in. Let it sit with juice in there for 15 minutes or give a few big puffs to get the juice into your new cotton so it doesn't burn and taste horrible 😂

[@nedronez]

Can I use the older Nord coils?

[@VapeandJuiceTV]

Nord on a Nord is all good :)

[@tgledz]

I’ve got older nord coils was sold them with the vape but I cannot get it in

[@AzTurboMini]

If you have juice in the pod when changing the coil, cover the the intake hole with your finger or juice will leak out everywhere. ☝️

[@BlackBeardYT]

Pro tip, Flip your device upside down Check the juice amount, make sure it's below the coils top

[@SirWinstonFurchill]

I learned that lesson the hard way!

[@K1LLADELPH1A-_-]

​@@SirWinstonFurchill sure alot have 😂. Better with a new full up anyways I always believe. 😅

[@advogar]

Hi friend. I have a Nord 4 but some guys says the RBA dont works for this pod. Now i'm confused about this (to buy or not the RBA). It works perfectly on nord 4?

[@VapeandJuiceTV]

You would need an adapter, if you mean general RDAs. But realistically I would suggest finding another mod for an RDA. They aren't made for them.

[@tommyshelby8973]

My nord 4 had pre installed coils that won't come out

[@poiutrew]

I could tell this guy was English, just from his manner; without any volume. Food for thought.

[@blacky9043]

Is there nord coils available rather than rpm coils? Rpm coils r utter lung busters

[@jdemelo044]

I tied putting mine in like that it doesn’t press in Until I turn it so it’s 90 degrees more from what you show so the gap is facing the two sides

[@carlosmorillon1174]

Can you change it while liquid is in side pod ?

[@K1LLADELPH1A-_-]

If ya wanna make a mess go for it. Won't hurt. Just make sure you always let some juice get into that cotton in the new coil you put in or it will taste nasty

[@marcosbornia8650]

What coil is used for the nord 4? the ones I have seems to small for it, originally I bought for the nord 2.. Thank you

[@mbk_7104]

The Nord 4 has two different pod styles,One which takes a normal RPM Coil usually 0.4ohms and the second is the RPM2 Coil which is 0.16ohms and plus the nord 4 has two different pod styles one which takes the bigger RPM2 for DTL and a smaller pod style for RPM for MTL

[@VapeandJuiceTV]

Love the in community engagement - cheers @mbk_710 for helping out here

[@danielkendall5547]

@@mbk_7104 thanks so much that’s very useful info

[@dppislousy]

Is nord 4 coil completable with earlier nord serious?

[@denversantos7682]

Newbie question .. Can you wash and reuse those already burnt occ? Thanks for answers

[@K1LLADELPH1A-_-]

Depends if the coil is still good and the cott ok n didn't get burnt and taste like ars😂

[@bigsky445]

You look like the Young DIYKing Joey. Great video! Quick & to the point! New Subscriber!

[@rockbatkillergaming912]

This is what I have and I've done it exactly how u did it but when I got to hot the vape it says no atomizer on the side and I dont get smoke plz help

[@thecraigmaestah]

i have this problem too. did you figure out how to fix it?

[@ArtFiendz]

When do you need to change the pod?? The coil comes out of the pod so does the Pod last for months?

[@FlyingSavannahs]

Yes, it lasts indefinitely.

[@ArtFiendz]

@@FlyingSavannahs I bought one a week after that comment and i've had to change the pod once. it cracked. not sure if it was from a drop or stress from my pocket. but having a spare pack of pods is definitely worth having

[@itsbenyt9025]

PLZ HELP MINE KEEPS LEAKING EVERYTIME I GO TO USE IT N ALL THE LIQUID HAS LEAKED TO THE BOTTOM

[@zSkNNYBNz]

Hi mate i have the ipx80 can you use the nord coils in the ipx80s?? i heard they have a higher resistance then the rpm2 coils

[@JohnnyRebKy]

How long do they last ??? I liked the novo 2 but pods tasted burned after 2 days and I spent as much on pods as I did smoking! So I gave up

[@VapeandJuiceTV]

What juice did you have in them? Two days is about 12 days too short at least.

[@K1LLADELPH1A-_-]

Should last 2 to 3 weeks but if you got your smok on 5o ohm and got it like a joint at a bon fire it may be your issue as well. Is it always hot when you're done?

[@KermitTheGodfrog]

i bought the .16 ohm coils that it takes but they dont fit in my pod

[@BlackBeardYT]

0.16 coils is for RPM 2 pod

[@AxlBlavkk]

Why dose my nord 4 pod leak?

[@jaspermandario]

What ohm of coil would u recommend for salt nic juice?

[@moneyruins4141]

Above 1 ohms

[@LauraRosenberger84]

@@moneyruins4141 how do you change the ohms? The 2 different pods included hit at different ohms. Can’t figure out how to change it.

[@kaleidodeer]

@@LauraRosenberger84 The ohms is a part of the coil. As an example: The RPM 2 0.16ohm Mesh coils provide an atomizer resistance of 0.16ohm with a recommended range of 25-50W. The RPM 2 0.6ohm DC MTL coils provide an atomizer resistance of 0.6ohm with a recommended range of 12-25W. The RPM 2 0.25ohm DC coils provide an atomizer resistance of 0.25ohm with a recommended range of 30-50W.

[@corahaine488]

I put a new coil in my pod, cleaned my pod and filled it and it doesn’t hit and tastes like coil. It doesn’t blow smoke out either I’m pissed and so confused somone help me 😭

[@corahaine488]

^It’s the exact same vape as in the video

[@b777x5]

Let the coil absorb the juice for like 5 mins. Otherwise it tastes like the coil.

[@maudecote1957]

Do I need to change pod when I change flavor

[@FlyingSavannahs]

That depends. A residual flavor will take something like 20 hits with good resaturation between hits to clear all the old flavor before the new flavor is 100%. If you don't want the transition, you can buy additional tanks to fill with your respective flavors.

[@Darkshadow3775]

Witch coil is best for salt nic for the nord 50w it is new and I just got it(I’m used to the nova 2)

[@VapeandJuiceTV]

I like the 0.6 mtl or 0.6 mesh

[@GeorgeGreeves-b6m]

When I’ve done do it says no atomiser on the device ? What seems to be wrong

[@christophermaynard528]

Mines doing the exact same

[@christophermaynard528]

figured it out. you have to use the right coil for the pod. if that makes sense

[@kai-po6fc]

@@christophermaynard528 omg thank u my other pod was working but my 2nd wasn't working tysm bro

[@Greed-IQ]

Im using a Nord 4 coil and it still says it

[@b777x5]

Push it all the way in.

[@mrg8963]

Nice quick tutorial. Thank you

[@FlyingSavannahs]

Matt recommends the Potato Jamboree juice.

[@christiancarlagustin1924]

Can a REEWAPE RBA work on Smok nord 4?

[@remembermysmile13]

I followed the directions exactly how you showed. But it keeps saying no atomizer

[@remembermysmile13]

When it did actually recognize that I had it when I push the button to smoke it a completely emptied all the juice out into the machine

[@louwickes1282]

My nord 4 coils DO NOT come out unless I use a fucking knife. Can someone help with that? Changing a coil is simple.

[@carlosmorillon1174]

Has anyone tested at how many puffs coil change on small coil change 25 mesh ? I mean full open air flow I guess it counts how long you vape but there should be same around counts when you need to change coil I how many hits ? 🙂

[@K1LLADELPH1A-_-]

How many hits? 😂 Nahh never counted. I get 3 weeks out of mine on the smoke 2 but 2 weeks off the smok 4 so far... but I also have it at a higher power as well so could be why it's going so fast

[@OriginalL.]

Why did they change it just wasted all the juice in my pod

[@farhanmansha4008]

RPM2 is for salt base or just RPM is for salt base?

[@trevorliber5987]

Just regular rpm for sure.

[@edenparis2455]

You never showed the child lock on the coil which is what I was struggling with! The angle is so odd

[@planetcamo98]

Short & straight forward! Thanks 😎

[@dannykurniadi2609]

Is it coil rpm nord 2 same as coil rpm nord 4? It seems coil rpm nord 4 is bigger

[@K1LLADELPH1A-_-]

It is

[@skeetskeetonu6928]

Can you Use Smok Nord 2 Coils?

[@VapeandJuiceTV]

Yes

[@LauraRosenberger84]

How do you change the ohms? The RPM & RPM2 hit at different ohms. I can’t figure out how to do it?

[@benrussell7855]

the ohm rating is specific to different coils. if you get a coil with a different resistance it will change automatically. That’s why the rpm and rpm2 show different resistances

[@LauraRosenberger84]

@@benrussell7855but it won’t change on mine. The RPM IS GREAT. THE 2 won’t go up so it hits like crap.

[@chrisbuckley1785]

Where is all the leaked vape juice??

[@bradleyparks5701]

He didnt put it in right how is the air gonna go through if ya have it position like that

[@juliabrouwer1284]

Doesn't recognize the atomizer :/

[@VapeandJuiceTV]

Have you cleaned the under side of the pod? make sure there is no moisture between the connectors, or tried a different coil?

[@trystentrainer6960]

@@VapeandJuiceTV mines doing the same. i have a nord 4 and i’m using triple coil 0.6 rpm coils.

[@toxin3175]

What about priming the coil do I need to much?

[@VapeandJuiceTV]

Not really, just enough for it to be moist. Don't vape it dry is all :)

[@carlosmorillon1174]

Nice

[@candacejones3352]

holy long winded batman

[@Darkshadow3775]

Idiot proof, just for me

[@jeanpoudd1187]

This vape is bullshit take me 30 min to put a coil.

[@SintaxBSD]

it literally takes less than a minute, tops... what are you doing wrong? you pull the pod out of the device, pull the coil out of the bottom of the pod and insert new, fill with juice

[@wolftales5203]

​@@SintaxBSD how in the fuck are you mean to get a grip on it to pull it out? Its bullshit😊