Рет қаралды 25,702
Car Battery Charger 12V 5A LCD Intelligent Automobile Motorcycle Pulse Repair UK Plug Motorcycle battery Charger 7.0 Ver FOXSUR
*For Personal emergency use only
* If your battery under warranty by supplier , pls direct claim better.
* Device checking your battery status , Capacity & Voltage without plug in power socket
Product Features:
1. This is a fully automatic battery charger with 3 charge stages.
2. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
3. 3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
4. Types of batteries: Most types of 12V lead acid batteries including Calcium, GEL and AGM, Wet, EFB, VRLA maintenance free lead acid etc.
Description:
Model:FBC1205D
Item type:Battery Charger
Microprocessor Control (CPU).
Switchmode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over voltage protection: Yes
Over temperature protection: Yes
Cooling: Fan
Specifications: British regulations (UK)
Input voltage: 100-240V AC, 50-60Hz 75W
Input Current: 0.5A(RMS) @230VAC
Output Voltage : 13.8v - 15.5V ,Max. 5A
Minimum start voltage: 8.0V
Battery range: 4-100Ah
Thermal protect: 65'C+/-5'C
Efficiency: App. 85%.
Size:150*85*60mm. (0.6*0.34*0.24in)
** Pulse Repair Mode : if Battery status below 10V just push the repair button , it will repair till auto stop . ( 5- 24 hours )
#carbatterycharger #BatteryCharger #12vbatterycharger #NS #Din #Charger #NS40 #ns60 #NS70
#foxsur
Frequently Asked Questions:
1. The LCD display "FUL", but the battery is yet fully charged.
Reason: As the Battery inside resistance is too large or the capacity of battery is reduced for Feeder Battery, vulcanized Battery, Low voltage/Long-idle time Battery, the voltage of battery will immediately soar, causing the "FUL" status occurs when the battery is yet fully charged.
Solutions: Press "repair" button, activate the battery.
Reason: There is no AC power input.
2. Battery voltage is normal, however the charger does not work:
Reason:There is no AC Power input
Solutions: Check the AC-power source are working or not, change the socket and re-try it.
3. Unable to reach "FUL" status after charging in long time.
The battery has been vulcanized, or feeder, or water depletion in the battery. The battery voltage will keep low status, causing the battery unable to get fully charged.
Solutions: Stop to charge when the battery is heating, check the battery is in shortage of liquid or Not. please charge cycle 1-2 times (Discharge-Charge, Discharge-Charge).