This video is 9 years old and still relevant for newbies like me 😁 Excellent 👌 Video sir. As I've just bought a charging board and a decent balance charger and needed to know how to work that thing 😂 plus I didn't even want to attempt reading the Chinese translated instructions 😆 So thank you 🙏
@Cosme4223 ай бұрын
Thanks for this video. Some tips. Music never ever goes on explanation videos. and for higher production value, you can skip saying what you are going to do and just do. Time is valuable.
@devjitpaul11917 жыл бұрын
sir, this is one high quality, well made video.
@travroy9 жыл бұрын
Thanks for the tutorial. Several sources are claiming you can charge different capacity lipos, in parallel, as long as they are the same cell count. I believe this makes sense considering the charger is measuring voltage, not mAh.
@Handles_AreStupid4 жыл бұрын
"How to Charge Multiple Lipo Batteries With Just One Charger" First 20 seconds: "this is not a guide on how to charge batteries..."
@Seneslau074 жыл бұрын
Nice video and I would add the following from other tutorials: 1. Step one - measure the voltage of each cell of all the packs. The cells of the packs should not have more than 0.1v difference, if they do those packs should be charged separately. This is a recomandation on many tutorials. Example: une pack has 3,75v/on the most discharged cell, the other cells on the packs should not excede 3,85v. that's 0,1v. The reason for this are the higher current exchange between packs when in parallel as explained in the following steps. 2. If the cells of all packs have more than 0.1v difference we should connect first only the main cables( the discharge, power cables) of the packs, starting with the pack that has the less voltage. 3. After a few minutes, during which, currents up to 10 Amps! depending of the voltage differences, go from the highest voltage packs to the less voltage ones. That's way beyond 2C of charging them from the other packs, thus the need for less than 0,1v difference as the currents rise if the differences are higher. Then we connect the balancing plugs, after minutes. Why is that? Because after some minutes the packs have come to similar voltages and the exchanged currents dropped so it's safe to connect the balancing plugs. 4. The number of cells should be the same, as the charger see all the packs as one huge pack with the same nr of cells as each pack has. The capacity doesn't matter. If one pack reaches the selected cell voltage, it starts delivering current to the other cells of the packs until they reach it too. Thus the capacity can be different. 5. Start the charging process at the courrents explained in the video. Multiplying the current you want to use with the nr of packs. 6. We should select lower current than 1C/pack because the packs have different internal resistance and although we calculated that the lets's say 8A current devided at four 2000mA packs will be 2A/pack(1C) some packs might receive beyond 2C and others half a C because of different internal resistance. Learned all of these recently after 15 years in the hobby, in which time I've always charged my lipos after flight (big mistake) to have them ready, and stayed charged all their life..a short one, 20-30 cycles before puffing and dropping in power, when others get 200+ cycles. So, no more staying charged more than a few hours from now one for me, and following the rules including the parallel charging ones described above.
@wolfiesynergymusic7 жыл бұрын
Best informative video about charging lipos ever. Thanks man
@haka87024 жыл бұрын
Yea, if your intention is to cause a fire it's your source
@zusuki26 жыл бұрын
Short and on point without any bla bla bla. Thump up
@MiniQFPV10 жыл бұрын
I use the same parallel adapter. It has been a fantastic way to speed up charging.
@upperechelon34568 жыл бұрын
Good basic information. If your charger can charge the full amperage don't. Its best to set your charger at .8 the total charging amperage. This ensures longer battery life.
@hippopotamus867 жыл бұрын
I think there is a lot of hearsay involved with LiPo batteries. I often charge at double the amperage, I've left batteries fully charged for over two years, they are still going great since I bought them in 2014.
@Vortigon11 ай бұрын
@@hippopotamus86 Leaving lipo batteries full charged is a dangerous and terrible idea - that ain't hearsay buddy.. that's fucking physics!
@kerjs027 жыл бұрын
Thank you for the video I was not sure on the balance board what order to use. Now I know it doesn't matter they are all the same. The math was much appreciated too thanks again.
@j4real9 жыл бұрын
Great video. Gotta say I was pleasantly surprised with the quality and content from what I was expecting with a lower view count video (only low for now!) Im sure that will rise!
@lakufoekdm42377 жыл бұрын
Perfect step by step instructions and easy to understand ! Thanks very much for sharing...
@ExSkyCyclePilot6 жыл бұрын
The voltage on every cell of every battery needs to be checked before you do this, and all cell voltages need to be with 5% of each other. Parallel two cells that have voltages far apart, and you'll be dumping voltage from the higher cell to the lower one at very high current - which can destroy your battery. Parallel charging is handy if all your batteries have been storage charged to about 3.8 volts per cell, and you want to charge several batteries at once.
@mattallen55755 жыл бұрын
Love this video. To the point and explained a question I had about charger not being able to match mAh. Thank you
@felixthecat75688 жыл бұрын
Great video. Very explicit and detailed, thanks for posting.
@ronaldonogueira7410 жыл бұрын
Excellent video and editing, thanks a lot for taking the time to do it.
@MindRiderFPV5 жыл бұрын
Thanks for the info! The bkg music on the other hand...
@jbundy45964 жыл бұрын
it was 2014.. a weird time
@Buz4rd9 жыл бұрын
Really good video dont stop this is very well done
@UrbanSleepersOfficial5 жыл бұрын
Thank you for the straight to the point information!
@JustInTime05254 жыл бұрын
When parallel charging they just have to be at the same voltage, but doesn't have to have the same capacity!
@fjsidebar4 жыл бұрын
Has to be, otherwise one can draw too much current if you charge with 1c/battery otherwise you have to charge with a fraction of it
@JustInTime05254 жыл бұрын
@@fjsidebar No, and your comment doesn't make sense. Go watch JB's video on it
@fjsidebar4 жыл бұрын
sure thing.. if one has double the capacity of the other 4 packs it needs more current for the same voltageincrease. But lower the charging rate and it will be fine
@YeshuaDisciple9164 жыл бұрын
@@fjsidebar can either of you answer what battery capacity you set the charger to? Like if you're charging batteries of the same mAh, when it has you enter the mAh of the battery into the charger, do you add in the mAh of one battery or do you add them together?
@fjsidebar4 жыл бұрын
@@YeshuaDisciple916 surely you add them together. but this is just for additional safety i think
@TheTangens3 жыл бұрын
Great video! But isn‘t it possible to also charge batteries with different (!) capacities? As long as the voltage of the different packs is the same, when connecting them, it should be possible with no problems. Imagine two connected water tanks with different volumes but same filling level.. Have a nice day!
@reanimationxp9 жыл бұрын
Thanks so much, great job explaining this and great diagrams. Not too long either, straight to the point. Appreciate it :)
@jitendrajadhav92127 ай бұрын
Hi, sir , thanks for sharing very useful information
@joshuaklind8 жыл бұрын
Wonderful, clear tutorial. Thank you!
@dkhallal7 жыл бұрын
Great video, thanks. Was never sure if the charge rate could be upped to the total of what you are charging. Like a dummy I've been charging at the rate of the lowest ah battery and wondering why it's not saving me any time to parallel charge. It should be pointed out that it's a good idea to let the battery cells of all the batteries equalize out for a while after connecting them to the parallel balance board and before starting the charge process.
@jasonbrown4672 жыл бұрын
this makes a slow charger even slower, right? the reason my fast chargers are slow is that the balance discharge current is limited to .7a, if i try to use parallel charge board it will make charging my batteries even slower if i want to balance them. great video though, i always wondered what these parallel boards did
@martijnvandenzen808510 жыл бұрын
Nice vid, crystal clear explanation
@GTARC_au4 жыл бұрын
Cheers mate. Well done 👍👊🌟🏅
@rogerliu889 жыл бұрын
Awsome video and editing... I do agree with Titus... music can be tone down to soothing elevator music!
@salsun74379 жыл бұрын
Thanks for the video. The music was really distracting and unnecessary.
@davidwile51096 жыл бұрын
Yes, the video was very good, and yes, the music was distracting. It really did not need any music.
@GeorgeCee6 жыл бұрын
I like the music. sounds good.
@james72353 ай бұрын
Really helpful, thanks 🙏🏻
@PeskyTheWabbit5 жыл бұрын
holy shit! AWESOME MUSIC CHOICE! high school art class!!!
@brischultz10 жыл бұрын
I've read on other websites that its ok if you have different capacity batteries as long as there isnt a huge difference.
@JaydenLawson8 жыл бұрын
Great succinct video - thank you.
@JaydenLawson6 жыл бұрын
And thanks again... 😝 forgot what to do after my last comment!
@RobbyNeale8 жыл бұрын
Nice, succinct video, and I enjoyed the music.
@Jonas-kj1ke6 жыл бұрын
Very good video
@chriswf2 жыл бұрын
Okay... So I guess Battery 1 and Battery 2 should be similar/basically the same voltages? B/c as soon as I hooked up my battery's balance connectors, they started getting hot as a crap ton of current flowed through them and started balancing cell B1 Cell 3 with B2 Cell 3. Is this correct? B/c if so then this isn't very handy unless you're sure your packs are all "charged" to the same voltage.
@aaronsprojects4 жыл бұрын
My Batteries have the 4pin white connector but lack the XT60 connector. They are 11.1V Lipo batteries. Will this method work for me to charge multiple or does it need that XT60 to work?
@sheapyfpv82243 жыл бұрын
So if you have multiple batteries to charge and they are outside the 1amp difference how do you get them to roughly the same voltage so you can parralel charge them?
@shariff4175 Жыл бұрын
Can you use this for large 36 volt scooter batteries?
@dronetv68575 жыл бұрын
Where can I buy the balance connector and the placket ?
@e3Scott6 жыл бұрын
Excellent video, thanks very much, I learned some things about using my parallel board from your video and it is much appreciated. Have you tried or do you know, can you use the board to put multiple batteries in storage mode as well? Often when I come back from a day of flying and I have lots of batteries I want to put in storage mode, was just wondering if being able to use the parallel board would allow me to put multiple batteries in storage mode and cut down the time :) Thanks again for taking the time to do this video, much appreciated. Cheers, Scott
@rraaddff9 жыл бұрын
Excellent video but what if i'm charging a 2200 mah my charger maxis out at 6.0 amp can i use that amp to charge it?
@jamesmusker6 жыл бұрын
Just a quick question do you need to plug the balance lead in at all ? The reason I'm asking is most of the balance leads on my batteries are chewed up due to crashes.
@viv86872 жыл бұрын
My battery is 9.6V 11.7Ah LiFePo4. What setting should i use please. I keep getting low voltage or high voltage. What setting should i charge it? It is 27 cell battery. What should my mAh and V be on my charger? Please help.
@sleepingbearffg50085 жыл бұрын
Excellent video!! Thumbs up!
@En1gmatic13 жыл бұрын
I have multiple batteries that are same cell count/same MaH, but all different brands with different c-ratings. Can they still be charged together?
@danvandenberg43512 жыл бұрын
thanks great infomation, but i got 1 question! Is it also possible to charge 3 or 5 battery's at the same time, or does it need a even number to balance each other out?
@BMWAVENTURA Жыл бұрын
can i do same process but using Life batteries?
@fbiagent33997 жыл бұрын
hey so i got a dynamite vision peak ultra lipo charger and i noticed it doesn't have a lipo balance port thing how come its made like that? is it safe to charge a lipo can i solder a balance port ??
@ee-sj8qr4 жыл бұрын
what if u need to balance charge more than 6 18650 batteries? how do u set it up? because the max u can go is 6 isnt it?
@nimalwijeyasinghe89759 жыл бұрын
I have 7.4v /2.2 amps = x3 So should i use 7.4v and 3amps? one amp for each battery ?
@ashleycawley58168 жыл бұрын
Excellent tutorial thank you
@Alvaroeduardo9 жыл бұрын
Ok those are 2S batteries ... ok, so you should always charge at 1 amp per battery? So if I have five 1.3 3S batteries, I should set my charger at 5 amps 11.1 volts (3S)? thanks
@tommobox24014 жыл бұрын
Do the battery’s have to be at the same percentage before you charge them or does it not matter
@michaellee50849 жыл бұрын
can you tell me which brand parallel charger board that is ? thx
@reece77134 жыл бұрын
I have 4 lipohv 2s batteries I want to balance charge how many cells do I charge it for 8s?? At 4amps?
@Janevjura9 жыл бұрын
Great video ! Greetings from Ukraine !
@bzzm_eu2 жыл бұрын
m8 im having equilibrium and this board is showing info just as just 1 lipo is connected. cables are allright, can you suggest if the equilibrium evo 90w is supporting this? or having different issue?
@aligrunner97648 жыл бұрын
Hi, is it necesary to be the same mAh capacity?. My case: 2x1500mah, 1x1600, 1x1400? Thnks for the video. Wait for your reply.
@dagobb8 жыл бұрын
+Iosif G , Same question here! I don't think it is advised, but 'd like to know it before trying and possibly damaging my lipos
@alaksmcgregor33586 жыл бұрын
I realise this way late, but for the sake of other people that may come across this. It is absolutely imperative that they are the same capacity. If they are not the same capacity it is quite likely that batteries will explode or balance wires will melt.
@goingdroning88918 жыл бұрын
Excellent. Perfect. And thank you!
@filterpan9 жыл бұрын
my charger can max at 10amp and i have 3 5200 mah 4S 10c batteries. should i discharge first every time i charge or should i go ahead and plug my 3 bats and rate it to 3 amps or 6amps or 9amps? im trying to do your basic math im thinking maybe i can charge faster at 9amps, 3 for every battery. am i making sense?
@diggy21072 ай бұрын
What if charger has banana only with no balance ports?
@harveyboy458 жыл бұрын
How come you have charged 3s and there are 4 packs?
@avinachmias86176 жыл бұрын
Hi , After seeing the video on KZbin I decided to challenge you with a question. I use a battery pack for my lifepo4 battery 40152S 3.2V 15AH 16 cells, the battery pack is serially connected, ie 48V, and controlled by internal BMS. Since it is not possible to verify the integrity of the BMS controller and it is not possible to check the cell balance. Recently I was trying to test the necessity of using BMS when I saw your video and decided to adopt your solution, that is to divide the 16 cells into four groups in which each group has 4 cells connected serial. 1. Can the configuration you are viewing match the type of battery I am using? 2. Can the charger you use meet the configuration I want to perform (4 sets of 4 cells)? 3. Last question, is there a simpler, easier, and more quality solution that you know or recommend? Thanks, Abe
@don830308 жыл бұрын
i heard they only need to be the same voltage and that capacity doesnt matter
@davidwile51096 жыл бұрын
Zero - batteries must all be the same cell count, not voltage. And capacity does not matter except for determining charge rate.
@lightningdad136 жыл бұрын
Awesome video. Where do I go to find a balance board for my charge. Hitec X1 A.C. Thanks
@bigaudio62906 жыл бұрын
Thanks for the tip I was super confused and it would take forever because I would only do one batterie at a time
@Texquad8 жыл бұрын
Awesome video! Informative and great filming job. Legit!
@lisenkaci93299 жыл бұрын
batteries have charge and discharge rates i have a 20 amp hour 12 v battery but i cant charge it at 20 amps that would be like 240 whats through the battery wouldn't be good. you have to charge the battery at whatever the charge rate is for that specific battery the amp hour is just the capacity
@reggypoggy40459 жыл бұрын
lisen kaci hi, so I have four 2700 mah lipo battery charged parallel using a paraboard, my charger is a 60watt , and has 6amp capacity, so I set the charger to 6 amps to charge the 4 lipos in parallel, but during charging it displays only 3 amps, is there something wrong with my charger or do I just dont understand the math on charging lipos. thanks
@adambiggs5088 жыл бұрын
Because the batteries have to be the same capacity for this to work, will a 2200mah and a 2250mah battery charge together or is the difference too much?
@jstefa28 жыл бұрын
the slightly smaller battery will charge slightly faster and raise its voltage a bit faster... but as the nice guy in the video explained they will try to balance their voltages all the time... its like having compleatley drained battery and a battery that has like 10 seconds of flytime left... so yea you can charge them both safely... in theory you can also charge 1500mah battery and 3000mah abttery together... just sink the board into liquid nitrogen :P
@fjsidebar4 жыл бұрын
Imagine one of the batts is fully charged when you connect it.. BONFIRE :D
@tomrutkowski48069 жыл бұрын
Very good thanks.
@mushroomfpv8 жыл бұрын
what about putting them into storage mode? how to calculate amps, are they the same?
@amirulhazeem9887 жыл бұрын
This is really helpful...thanks
@Jacek_B9 жыл бұрын
Thanks for this helpful guide! I have 2 packets 5200mAh 3S. Normally i charging one at 4.0A, when i connect two is this good if i chargé tchem at 6.0A? Thank You!
@BoyFindsTako3 жыл бұрын
If you gave 5200 mAh, the correct charge rate is 5.2 Amps (if the battery states “2C”) that’s means it can handle twice as much charge amps rate which is 10.4 Amos charge rate. But that can shorten your life of your LiPo. Charging under the required rate is okay, and actually better for the battery. I have had LiPo’s for 10 years and a they still work as great as they did when I first bought them. For example: 3000 mAh (max 3 amp charge rate) unless the C rating is 2C then you LiPo can handle up to a 6 amp amp charge rate. Hope this helps.
@rafaerello32836 жыл бұрын
This is not safe, because of the diference of the voltage
@Timb0NZ4 жыл бұрын
If cells connected in parallel equalize. Does that mean they have to be the same voltage? Because if one cell is 50% and the other is 10%. Wont the 50% battery start charging the 10% battery at full discharge current??! That is bad because we are only suppose to charge at 1C.
@wormhole3314 жыл бұрын
That's why you should only plug in batteries that are within 0.1v difference each cell.
@flyineyeaerialfpv55923 жыл бұрын
What if the batteries only charge up to around 15.2 to 15.4 and not up to 16.8 on 4s batteries 🤔. Im charging 6 1000mah 4s batteries and I set the charger at 6000mah and 6.0 amps. Well, the charger didn't like that and after about 45 seconds of charging the screen dims out and it stops charging and beeps. So, I guess its because my charger Max's out at 6.0 amps. So, I set it at 3000mah with just 3 batteries and set it at 3.0 amps of charge rate and it charges for about 35 minutes and it will say they are full at 16.8 each with all 3 connected. Then, I will test them out 1 at a time and they are indeed not making it to 16.8 but only to around 15.4 per battery? Which is around storage amount. Im wondering why it is doing this? I then still have to finish each battery one at a time up to 16.8 a pc from 15.4. Each one will make it to 15.4 identical to the others. Also important note...I did have the charger set to balance charge not storage charge so I don't know what is going on. Any help would be great if you have any ideas what is causing this. Im thinking I need a bigger charger with more capacity. The charger is a B6 V3 smart charger rated for 1 to 6 cells for lipo charge rate 0.1 to 6.0 amps discharge rate 0.1 to 2.0 amps and it does 2 3 4 5 and 6s. Thanks in advance for any ideas 💡 😊. Take care and talk soon.
@midknightmist8 жыл бұрын
how do you know if you need to flip the balance connector? do you need to flip them on every board or just this style?
@keesanker42416 жыл бұрын
great video! But can you use two lipos where one is for example 3.6v per cell, and the other is 3.8v per cell? Will this be a problem?
@supermoto20127 жыл бұрын
How do I know which XT60 port belongs to which Balance port ?
@TijmenvdP8 жыл бұрын
Hey I'm building an electric longboard and I want to use this balance charging board to connect two 3s batteries together to make charging easier. To make the entire wiring setup easier, I'd like to then draw power through this board, which will then power my ESC and then obviously in turn the motor. So basically, my question is, with an 85A ESC and 60A motor, will this board screw me over since I want to draw so much power through it. It says max is 30A. Would I be able to draw power through it to the ESC like I described?
@KiyoCabessa9 жыл бұрын
Amazing tuto!!! Thanks for the video =)
@brapppstar23145 жыл бұрын
what is your charger? thanks for the video
@pierandreamueller90348 жыл бұрын
whats if i want to charge with my skyrc 1200 watt power supply? do i need something else than just a parallel board and my power supply?
@huwbishop69958 жыл бұрын
lipo need to be charged constant current, constant voltage. When finished it needs to switch off. A power supply will supply as much current as the battery calls for, so not cc. It also will not switch off when finished. To get the maximum life from your batteries, they should only be charged at 1c.
@accordance737 жыл бұрын
question...because i will be using a parallel charging balance board do i have to set my charger on to " balance" versus regular "charging"? cause as of now i when i charge one pack at a time i charge under "charge" versus "balance" you know what i mean? thanks for any help you can provide. awesome info video BTW.
@realsoftgames71746 жыл бұрын
how would you get the batteries to around the same voltage? is there a fast way to do it?
@butterbean117 жыл бұрын
great video, as someone said before.
@golden42488 жыл бұрын
With regard to new batteries and conditioning, can you discharge in parallel also
@SecondWindMechanical8 жыл бұрын
So if I charge two 2s 7.4volt 65000mah batteries I charge them on the 2s setting at 14volts? But my charger only goes up to 6amps?
@HuskyStudios8 жыл бұрын
I beleive amps and volts are different ...
@MikevomMars8 жыл бұрын
To charge a 6500 Lipo, use 6.5 Ampere (= 1C), so your charger barely handles one. I wouldn't recommend loading two of them simultanously, it would take ages. You should get a better charger with 100W / 10A charging power.
@chowderbob4u7 жыл бұрын
Is it safe to discharge the batteries through that board at a high discharge rate near max rating?
@vasiletomazian74178 жыл бұрын
GREAT VID...without ....bla-bla-bla...non sense .Tks
@billysventzouris9 жыл бұрын
how do you charge a 6600 lipo battery if your charger only goes to 6.0amps?
@zerigemok9 жыл бұрын
Just charge it at 6.0amp. It's just gonna take a bit longer than 1 hour to fully charge the battery
@smoothntallGWM7 жыл бұрын
Music does not belong in this video. For future videos I recommend the interesting audio commentary (but I had to stop listening because of the bad music) be on the LEFT channel only, while the annoying and distracting music can live on the RIGHT channel... that way we can choose for ourselves to mute that crappy trash music or listen along enjoying it like (apparently) the poster does.
@flakito0115037 жыл бұрын
can i charge two 3s batteries connected in series using one of the xt60 connectors on the charging board and two of the 3s balance lead connectors
@fookutube5017 жыл бұрын
Hi can you discharge using these Parallel Charging Board ,to find out the mah.
@hukchone45215 жыл бұрын
thank you very much. imax B6 B6AC balance charger , 14.8V 4S 1500mAh 75C Battery XT60 Power Genius PG Parallel Charging Board Supports 5 Packs of 2-6S Lipo Battery XT60 T Plug - XT60 can I use above ? Please advice.
@aiRxShop5 жыл бұрын
Wait... why is 4.0 amps equal to 1c charge when you added them all up to be 6.8... you didn’t explain what that means and why/how
@wormhole3314 жыл бұрын
He didn't say that. He's charging at 4 amps bc his charger is is limited I guess. But he'll be charging at less than 1c. He's charging at 0.6c