Now i know how to remove and fix serpentine belt because of you Peter Finn. Thanks a lot for your slow motion teaching.
@PeterFinnTheCarDoctor Жыл бұрын
😀👍
@fonestop6 жыл бұрын
Very informative video. I followed the exact steps and completed it within 20 minutes. Thanks.
@PeterFinnTheCarDoctor6 жыл бұрын
Great !
@jasonirish23619 жыл бұрын
A very thorough demonstration. Thanks for sharing your expertise.
@PeterFinnTheCarDoctor9 жыл бұрын
Jason Irish Thanks for feedback.
@bikemannc5 жыл бұрын
Thank you very much mr. Peter Finn I had no idea how it all worked but you made it very clear and you took your tongue was very very patient that's what I needed now I understand thank you!
@nildakib.15988 жыл бұрын
I loved your video I love the way you explained every detail great job Peter .
@PeterFinnTheCarDoctor8 жыл бұрын
+Nilda B. Hello and Thanks Your comment. :-)
@MrJaymohjev9 жыл бұрын
After I have watched this I have realized that the mechanic used the wrong belt which is 5px 1210. This was very much educative thank you very much
@PeterFinnTheCarDoctor9 жыл бұрын
Evelyn Karimi Thank You.
@TheJay9115 жыл бұрын
Thank you for a very informative and good video. Helped me do my mothers Car as needed a new Alternator too, saved me £120 labour cost 👍
@mightyangler109 жыл бұрын
I love all your videos that you post...you explain everything really well thanks for the help.
@PeterFinnTheCarDoctor9 жыл бұрын
Jossie Thanks.
@randomthings8247 Жыл бұрын
СПАСИБО I have watched a dozen videos and none gave the VERY important part abot the second bolt that MUST be loosened first, THAN YOU
@PeterFinnTheCarDoctor Жыл бұрын
Right on
@kerwinwade18845 жыл бұрын
I have a 3zz 1.6l engine which is similar, thank you for the videos you make, it's good videos. 👍
@PeterFinnTheCarDoctor5 жыл бұрын
Thanks for comment. :-)
@andrzeju15054 жыл бұрын
Thank you
@johnleopold84515 жыл бұрын
Thanks for your video.I searched for hours just so i could get the belt layout..Once i saw this i had it done it 5 minuts. Thanks again!
@PeterFinnTheCarDoctor5 жыл бұрын
You are Welcome Sir. :-)
@ademolaaderogba81589 жыл бұрын
You have really made me an Automobile Engineer, the video is very instructive and educating, your analysis is second to none, if you will agree an ready to learn more from you. In all you are wonderful. Thank you Peter
@PeterFinnTheCarDoctor9 жыл бұрын
HRM Ademola Aderogba Aderibigbe Thank You and good to hear your comments.
@ademolaaderogba81589 жыл бұрын
Peter I have a small problem to correct the time chain setting. I fix the belt very well, can you send me a pix of the timing chain setting.
@xXMrTrolFaceXx9 жыл бұрын
Peter Finn see the bolt beside belt tensioner can u nip the belt or not
@kirkjohnson53789 жыл бұрын
thank you thank you thank you. Keeping my family's fleet of junkers running I am constantly searching UTube for repair videos. This is by far the best repair video I have seen.
@PeterFinnTheCarDoctor9 жыл бұрын
Kirk Johnson Thank You and You are welcome.
@Tonkan Жыл бұрын
Thx peter for Your videos crystal clear . Im Tierd of all american amature "experts" just like to hear there one voice. Finaly one that is realy pedagogic thx Doctor 🙂
@PeterFinnTheCarDoctor Жыл бұрын
Wow, thanks
@aleksandarradulovic6995 Жыл бұрын
You explane like a doctor. Now I can alone. Thank you
@PeterFinnTheCarDoctor Жыл бұрын
👍
@Gardo3980 Жыл бұрын
I save 100£ watching your video.
@PeterFinnTheCarDoctor Жыл бұрын
Thank you too 👍
@tassielaunie6956 Жыл бұрын
Thank you mate, finally i can finish it after watching this video.
@PeterFinnTheCarDoctor Жыл бұрын
No problem 👍
@gaminijayasiriwardena77157 жыл бұрын
I am very happy to see your explaining and I came across the understand the proper way to replace the belt of my vitz thanks
@PeterFinnTheCarDoctor7 жыл бұрын
Thanks for feedback. :-)
@Ken-we9jc8 жыл бұрын
Hello Peter. I have an interesting symptom, I have a 2003 corolla sport. My belt squeaks only at 1000 RPM's. If this was a tensioner issue, would it squeak all the time? If the belt is bad would it squeak all the time? Or is there another part causing the problem? Your videos are very educational and extremely informative. Thank you and please post more videos!
@PeterFinnTheCarDoctor8 жыл бұрын
Hi, please replace the belt. Old belt keeps bad sound.
@donaldmoses46214 жыл бұрын
Peter thanks for the explanation in detail.
@frednyaoro3936 Жыл бұрын
Very well illustration
@PeterFinnTheCarDoctor Жыл бұрын
👍
@nmk00t8 жыл бұрын
Thank for your video mate. Very clear and so much info.
@PeterFinnTheCarDoctor8 жыл бұрын
Thanks for comment. :-)
@notoco11997 жыл бұрын
Hi Peter. Great video...very detail like orther one you make. Thanks to you I fixed my rusty fuel filling pipe:-) got question. my Yaris2008 1.33 2SZFE just did do so far 38000 miles this belt should last at least 50k miles does not make any sound at the start but it is 9year...do I need to replace it?? thanks again for your videos
@PeterFinnTheCarDoctor7 жыл бұрын
No replace. Do not replace your belt. It last 50k.
@mhmmed10nomn715 ай бұрын
Thank you with all my heart
@PeterFinnTheCarDoctor5 ай бұрын
Thanks and noted 👍
@Jimenezt10008 жыл бұрын
Thank you sir for the video , great job!!!
@PeterFinnTheCarDoctor8 жыл бұрын
Thank You.
@nildakib.15988 жыл бұрын
hi I have a question I heard you mention that it's better to buy an original serpentine belt from toyota because it's very good quality but I already bought one from a Napa auto store and the belt is made by gates that it's suppose to be a good quality also . but now I'm confuse did I do the wrong thing by buying the serpentine belt from Napa and not from the toyota parts department please get me out of my doubt and reply thank you. ..
@PeterFinnTheCarDoctor8 жыл бұрын
+Nilda B. Hello. The best place is always to choose the Toyota dealership part. Cheaper brands parts quality is almost always weaker. :-(
@LordZorak118 жыл бұрын
Thank you for this video.. it is very helpful.
@PeterFinnTheCarDoctor8 жыл бұрын
+Zorak Mantis Thank You. I appreciate Your feedback.
@predragspremic16154 жыл бұрын
Hi, Thank you very much. Very nice way how you explain. I have a Yaris, but 1.4 d4d 2010. It seems that's the same installation, I tried to changde the alternator but can't access to all these piece. What is your suggestion please to access ? Should I go by down, or by side (Remove the bumper on the front wheel?) Do you have some advice ? Because impossible to do like you (no space to access to the tensioner). Thanks you very much :)
@2Skills4u4 жыл бұрын
I'm wanting to change my serpentine belt and also my chain tensioner, I tried to remove the belt but every video apart from this one shows you just need to put the wrench on the top "nut" that's welded in the tensioner and not the loosen the bolt under it, I tried all day and with both hands full force to move the tensioner forwards....without success other than killing my hands and arms, I will try again tomorrow by loosning the nut underneath and trying again, HOPEFULLY it works...thanks
@PeterFinnTheCarDoctor4 жыл бұрын
Hello 😃, I have read your comment and I appreciate it. Thanks. 👍
@lazzixx7 ай бұрын
did it save you?
@TerjeNormann5 жыл бұрын
Great video... Thanks... But do you know the exact lengt of this belt on the 1.8 VVT-i without the aircondition compressor?
@TerjeNormann5 жыл бұрын
@@johangullberg66 I have found out in the metantime... Yes it is 1560mm.
@ahamadnamer575110 жыл бұрын
Thanks that was easy to understand I am not good at English but I understand you and thanks
@PeterFinnTheCarDoctor10 жыл бұрын
Ahamad Namer Thanks.
@The_Macaroon5 жыл бұрын
Audio missing from large part of this. Still very helpful thanks
@boudjemahamid65375 ай бұрын
Merci beaucoup pour votre aide !
@PeterFinnTheCarDoctor5 ай бұрын
Thanks for comment 👍
@sporton124 жыл бұрын
it seems the tensioneer bolt doesn need loosening. on may car it i just pushed on the tensioneer. thanks for the video
@VeryBadReputation Жыл бұрын
Change the belt and low rev squeaking went away. But I noticed about 1mm (3/64in) left right play on the power steering pulley and even less on the AC compressor. Is this acceptable?
@PeterFinnTheCarDoctor Жыл бұрын
Good comment, thanks 👍
@vacavilleful3 жыл бұрын
Excellent presentation sir! Can you please present this way the belt replacement for Toyota echo 2000. Thank you
@PeterFinnTheCarDoctor3 жыл бұрын
We will try
@gustavoceratti66059 жыл бұрын
Thank you very much Pet, this is excelent video....
@PeterFinnTheCarDoctor9 жыл бұрын
+Gustavo Ceratti Thanks for comment.
@WinChesterFIN5 жыл бұрын
Nice video. However, you don't have to touch the tensioner mid/attaching bolt at all. Just put 19mm socket etc. tool to the fixed/welded nut in the tensioner, pry tensioner open as much as needed for the belt to loosen, put new belt back in and you're done. :-)
@PeterFinnTheCarDoctor5 жыл бұрын
Great and Many Thanks for comment. :-)
@33322210005 жыл бұрын
Replace at 50K-60K miles? I have a 2000 Celica since new and now with 167K miles and will be replacing the belt for the first time!
@tring66194 жыл бұрын
I have a 2006 Toyota Corolla with 45,900 miles. This is the recommendation from the Toyota dealer: “Drive belt, very dry, full of cracks, replacement cost is $245 USD”. It costs too much. I am thinking about changing it by myself.
@Leebabins8 жыл бұрын
Great video, thanks a lot.
@PeterFinnTheCarDoctor8 жыл бұрын
Thank You ! :-)
@ThanhNguyen-uq1ky3 жыл бұрын
Thanks so much!
@PeterFinnTheCarDoctor3 жыл бұрын
You're welcome!
@emersonbarahona579 Жыл бұрын
Good job!!!!
@PeterFinnTheCarDoctor Жыл бұрын
Thank you! Cheers!
@tahaitani43252 жыл бұрын
Mr Peter, I got Toyota yaris with engine code 1.3 vvti 2SZ-FE. Is it the similar steps to follow?
@PeterFinnTheCarDoctor Жыл бұрын
Noted and Thanks 👍
@abpccpba9 жыл бұрын
Are those making birds in the background? Very good demonstration; Thanks.
@PeterFinnTheCarDoctor9 жыл бұрын
Paul C Johnson I like birds. They are also my "team".
@samg58807 жыл бұрын
Hi Peter Nice video. Thank you. one thing I need to ask you. Should you tighten the engine block bolt, and if so does it matter if the tensioner mechanism does not move at all when accelerating? thanks
@PeterFinnTheCarDoctor7 жыл бұрын
Tight the engine bolt
@mhmmed10nomn715 ай бұрын
Thank you with all my heart ❤
@pennfishing92465 жыл бұрын
Peter, how do you adjust the timing belt for smog test?
@seriousstuff88876 жыл бұрын
great videos , well done and thank you.
@PeterFinnTheCarDoctor6 жыл бұрын
Great and Thank You. :-)
@jasiulmia76762 жыл бұрын
ধন্যবাদ আপনাকে
@PeterFinnTheCarDoctor2 жыл бұрын
Thanks 👍
@pacheco4648 жыл бұрын
gates its very good quality. too
@PeterFinnTheCarDoctor8 жыл бұрын
+misael pacheco Hi and Thanks for feedback. :-)
@kalpeshkapadia46233 жыл бұрын
Thanks peter
@PeterFinnTheCarDoctor3 жыл бұрын
Ok, Good comment. 👍🤠
@meredithsickel66556 жыл бұрын
Actually it's totally fine if you have little cracks that run perpendicular to the ribbing, only replace if you have cracks running in the same direction
@PeterFinnTheCarDoctor6 жыл бұрын
You are welcome Sir. :-)
@lenoxmclaren49462 жыл бұрын
I ask how do I change my alternator belt on my 2011 Toyota Probox,all I see is the one belt used on newer cars, was not useful.
@PeterFinnTheCarDoctor2 жыл бұрын
Hi Sir. You have to measure the old belt and then buy a new
@kananaananias4 жыл бұрын
Mr Peter? What is the model of engine?
@lopescasinha3 жыл бұрын
Thanks for share!
@PeterFinnTheCarDoctor3 жыл бұрын
My pleasure!
@geojor7 жыл бұрын
excellent video, thank you ...
@PeterFinnTheCarDoctor7 жыл бұрын
Your comment is excellent!
@jerjaj26898 жыл бұрын
Hi just wondering if its the process for VVTL-i engine (ZZE123)? I've got a corolla 2005 sportivo. thanks
@PeterFinnTheCarDoctor8 жыл бұрын
Hi, it should be similar. :-)
@oswaldocollazo1964 жыл бұрын
in order to remove the belt tenisoner, you must remove the bolt to the motor mount and jack the motor using a jack and a wood block. place the bolt on the jack and jack up the motor using a solid place on the oil pant to clear the 17mm bolt from the engine block. not so easy to do.
@machsix1238 жыл бұрын
I saw an DIY that doesn't mention loosening the tensioner and all you do is move the fake nut. I'm wondering if loosening it is necessary?
@PeterFinnTheCarDoctor8 жыл бұрын
+machsix123 I loosen it always. We have diy technicians and Toyota specialists.
@machsix1238 жыл бұрын
+james p I did replace the belt and only used the fake nut. I had no tension problems when removing or installing the new belt. It's been about 2 months and no issues and no more squealing!
@YardByrd16 жыл бұрын
I made the mistake of not loosening the tensioner. It did not spring back when I put everything back together until I loosened it and heard/saw it spring back and then re-tightened it. Peter, as always, is worth listening to.
@yussuf12777 жыл бұрын
In my Corolla 2000 VE one of the pulleys that holds the belt is loose which made the belt fall off. How do i tighten the pulley?
@PeterFinnTheCarDoctor7 жыл бұрын
Hi, you need to replace new pulley
@mhmmed10nomn715 ай бұрын
شكرا
@PeterFinnTheCarDoctor5 ай бұрын
Thanks and noted 👍
@MrMcGear4 жыл бұрын
Thank you!
@PeterFinnTheCarDoctor4 жыл бұрын
You're welcome!
@71grupa5 жыл бұрын
this engine doesnt have ac compressor?
@oskaredx55414 жыл бұрын
How to replace roll on ternsioner roller?
@azizkabir19195 жыл бұрын
Mr Peter Finn thanks
@kananaananias4 жыл бұрын
What is the model of that engine?
@user-fs6bt9wj1z4 жыл бұрын
عاشت ايدك ❤
@PeterFinnTheCarDoctor4 жыл бұрын
Great info. 😀👍
@kdg300i9 жыл бұрын
I notice u mounted the belt with out the ac compressor... Do u know the belt size with a ac compressor?
@PeterFinnTheCarDoctor9 жыл бұрын
kdg300i Hello, it should be to 1.6 engine: 6mm x 1690mm (width x lenght) and to engine 1.8: 6 mm x 1873mm
@kdg300i9 жыл бұрын
Thanks i will give it a try.. but is it possible to show me a diagram how the belt suppose to be mouted on with the compressor?
@wael999015 жыл бұрын
Thanks Peter
@PeterFinnTheCarDoctor5 жыл бұрын
Thanks Sir. :-)
@rajnikantlavingia8105 Жыл бұрын
What is the part no. Of the belt, I can buy a Bosch one.
@PeterFinnTheCarDoctor Жыл бұрын
Thanks 👍
@joesaric16 жыл бұрын
you could start your engine at the end to check if it is working properly
@PeterFinnTheCarDoctor6 жыл бұрын
Yes, it works well. It the Toyota. 100% Bullets proof Technology. Works in Texas and Alaska. Now and in Future. :-)
@robertphirii88462 жыл бұрын
It's broken in the block how to remove the remaining part in the block?
@PeterFinnTheCarDoctor11 ай бұрын
Good comment, thanks 👍
@lazzixx7 ай бұрын
you are screwed
@robertphirii88462 жыл бұрын
How replace the 17 mm bort wen it's broken
@PeterFinnTheCarDoctor11 ай бұрын
Good comment, thanks 👍
@Melvinbueno7 жыл бұрын
Thank You
@PeterFinnTheCarDoctor7 жыл бұрын
You are welcome. :-)
@user-lc3ww3ir6u5 жыл бұрын
Good :)
@mantag79 жыл бұрын
thank you
@PeterFinnTheCarDoctor9 жыл бұрын
Imad Mantag Thank You for comment. :-)
@stillsmokin53398 жыл бұрын
dam good videom
@PeterFinnTheCarDoctor8 жыл бұрын
Thank You for feedback. :-)
@fernandohood5542 Жыл бұрын
Where is the air conditioner pump?
@PeterFinnTheCarDoctor Жыл бұрын
Below of Alternator. Look video: kzbin.info/www/bejne/oamnkqerrceehMk