How to Circular Pattern Sketch Geometry in Fusion 360

[@ProductDesignOnline]

Here's a playlist covering Fusion 360's sketch tools: bit.ly/sketch-tools-playlist _ P.S. If you liked this video, I'd love for you to Subscribe ► bit.ly/sub-right-now *TIMESTAMPS* 0:00 - Circular Pattern Sketch Geometry in Fusion 360 0:33 - Activating the circular pattern tool 2:01 - Selecting objects 2:23 - Selecting the center points 2:42 - Changing the quantity 4:53 - Deselecting objects 6:32 - Updating the model 9:48 - When to use circular pattern sketch vs modeling tools

[@markroworth5700]

Thank you for speaking slowly and clearly (allowing us to follow and do the same thing), and not rambling. Much appreciated.

[@thomasbovington3180]

Best part about this guy is at 34 seconds in he says how to do the circular pattern for a 3 dimensional object. I knew how to do it in a sketch but not for a 3 d object. Question answered immediately. Granted I might have just lucked out but I've watched his other videos and he commonly expands to at least explain the full capacity of fusion 360 enough to understand it. Keep making these videos. Make more complex ones where there are several ways to build the object. Thanks so much!!

[@ProductDesignOnline]

Thanks, Thomas! Glad to hear you're enjoying my tutorials. I appreciate you taking the time to watch and comment....and I don't plan to stop making videos any time soon. Cheers, Kevin :)

[@onsafari]

This tutorial was perfect. I learned exactly what I needed. Thank you

[@AlfredoAntonioMartinez]

I am a pretty sad that I am living in in Argentina, and here the dollar it is alot expensive, but I will do it my effort to support you sharing your amazing channel and I will try it to buy you a coffee at least, I know that this it is just a little thing, but I need to feel that I do it something for you, because you deserve it. thanks for sharing your knowledge Kevin! I am very happy to found your channel, you are helping me alot.

[@ProductDesignOnline]

Alfredo, I really appreciate you doing that! Every little bit helps, and I really appreciate you sharing my channel as well. Hearing from subscribers like you inspires me to keep creating more content...and to build a bigger community! Cheers, Kevin :)

[@JetCrayfish8]

Your a God wow that was so understanding pleas do more and keep to the point for someone that has never done 3D modeling or anything in that area a work

[@ProductDesignOnline]

Thanks again for your support! Cheers, Kevin :)

[@JetCrayfish8]

@@ProductDesignOnline for real Man once i get amzing with Fusion 360 I hope to repay you in some way thank you so much for all the tutorials all the videos you do everything it means a lot keep them coming but please do try to remember to keep them as simple as possible I understand there are times where it will be hard for you to do but it helps out even the beginner of beginners out so much :)

[@ProductDesignOnline]

@@JetCrayfish8 Thanks for the reminder... I always try to remind myself this before recording the tutorials... but there are definitely times where I can slow down or go into more depth throughout the explanation. Keep at it... I look forward to seeing how much you can model in a few months! Cheers, Kevin :)

[@JetCrayfish8]

@@ProductDesignOnline thank you so much I'll do my best to recommend people to your Channel

[@ProductDesignOnline]

@@JetCrayfish8 Thanks! I truly appreciate that! :)

[@sm6fie]

Very good, very clear...

[@4funrc11]

Hey, :) Thx. And yes, I have had performance issues using the sketch circular pattern tool. I didn't understand why until you pointed out why. So, no more cussing Fusion for me, well, until the next time I do it... :'○ Which really isn't very often at all.

[@ProductDesignOnline]

Thanks for sharing, 4FunRC! Yea, it gets a lot of users... and it's something I think the engineers could incorporate into the software...warning users that the sketch patterning tools should be used with caution as they take a lot more processing power. Thanks again for taking the time to watch and comment. Cheers, Kevin :)

[@rjlatheart]

This was a great video once again Kevin! I have not had any issues with the pattern tools yet. You mentioned our own computer performance .... Can you use that as a subject of one of your videos please? ie What do we need (really) to make Fusion Happy without issues. Thanks again for doin this GREAT JOB!!! How about a beer instead of a cup of coffee?? Sorry Alfredo

[@ProductDesignOnline]

Thanks, Rich! That's an interesting video idea...and I've added it to my never-ending list of videos to make. Beer works as well... as long as I don't have too many before recording, or you guys may not be able to understand what I'm saying ;)

[@tomjoad1060]

thanks for the video. very useful!

[@SaturninePlaces]

Thank you so much!

[@Gulitize]

can one rotate the entire pattern?

Reason I came here was to find out how to delete the pattern WITH the repeated shapes. I don't want to clean up all of them manually :( Is there a way?

[@KARLLARK100]

Good day kevin always very nice vids,please can you do a vid on hinges,.//.,if you like ta.

[@ProductDesignOnline]

Hi Karl, have you seen this hinged box demo? kzbin.info/www/bejne/n4SlpHWKgth6is0 If so, what other type of hinge did you have in mind? Cheers, Kevin :)

[@anone3842]

How do you copy or duplicate holes in objects around a circle? I want to create M3x20 holes equally spaced out around a circular object using the hole tool... how can I use the circular pattern tool with the hole tool? Or select existing hole with the circular pattern tool?

[@ProductDesignOnline]

You'll want to use the Solid Modeling Circular Pattern command which allows you to pattern faces, features, bodies, and components. You could use the features option and select the Hole command in your timeline.

[@judkiewiczj]

how about if you start from the beginning? How to get to sketch drop down list?

[@ProductDesignOnline]

I did start from the beginning at the time of recording this...but unfortunately, the user interface changed. You now need to use "Create Sketch" (in the Toolbar) to enter the sketch environment.

[@txlec99]

how do you still keep the old ui in 2019? any help please? been looking for answers.

[@ProductDesignOnline]

Unfortunately, Fusion 360 does not offer a way to revert to the old UI. I record all tutorials with the latest version. See the channel home page for newer tutorials: kzbin.infovideos

[@estorilblu]

Video started halfway though I could even draw the two circles first 😅

[@nivyanahmed6330]

can you give me heart for no reason ?

[@ProductDesignOnline]

Hi, Nivyan. I give out the KZbin "hearts" to those who comment questions that help out the community, or to those who compliment the tutorials. Cheers, Kevin :)