How To Clean a Motorcycle Helmet - Jafrum.com

[@markastin001]

What a well spoken and articulate young man. A pleasure to listen to. Thank You

[@evanesys749]

Definelty an underrated video, deserving way more views than it currently has. Well spoken, well written, very informative, great examples, thank you kind sir.

[@Libertyracer]

Best helmet cleaning video yet and I just watched four others! Very comprehensive and well presented by this gentleman!

[@damejelyas]

you have a great rock and roll soft voice,!

[@iloveplayingpr]

Watching this Video because I Just found out that there was a little mouse living in my stored helmet... did a bit of damage but not too much that makes it unusable

[@ccatdaddy64]

If you had a sticky residue on your helmet after long time storage, what would you use?

[@Jafrum]

@jack.colbert "Helmet face shields are made of polycarbonate. Ideally, a face shield should only be cleaned by placing a very warm rag over the shield and allowing it to sit for a few minutes. This is the recommendation of some of the top premium helmet brands. If this is not possible, an agent designed for cleaning polycarbonate eyewear like Oakley’s eyecare kit can be used. The point is, the less chemicals, the better. Good job for catching that and sorry for the confusion! - Louis"

[@mml1224]

great voice,vid!....i have a matte beanie dot helmet with sticky residue in some spots, what can i use, home based cleaners would b great , let me know! thanks

[@Lynx799]

Thanks guys, Damn shame that little over 100K views have only been accumulated over the period of time that your videos been up i really feel it deserves more, i know i learned something and as i said i really appreciate it when i do a search and am able to come away with valued information that may take me quite a bit of time to learn another way.. since im not able to give high fives over the internet have a like instead & again thanks :D

[@HAIRYBIKER777]

Thanks mate. Is it safe to spray inside the helmet if you have in-helmet comms?

[@davidallen4174]

Thanks, I just bought a scooter with two, older helmets. They were well kept and I will eventually get a new one, but for now and for the occasional passenger, I now know how to spruce them up. They're in great shape but they have a lingering smell that should be easily eliminated with your process.

[@dognatureandhuman6151]

Hi! What do you recommend to wipe off oily finger prints off of the matt black helmets ?

[@godwetrust1436]

excellent video. please create more. For atv plastics, tire care, apparel gear including goggles, tire pressure safety and more. very comprehensive

[@shelly556]

Thank you for your tips. I do have a question I accidentally got some oil based fingerprints on a non-on the second helmet the one you didn’t really work with. How can I get them off any good tips? Any help would be appreciated

[@TheJquirico]

This is a great video and I've learned a lot honestly! However what do you suggest to clean a matte black helmet with then? I guess a rag soaked in hot water? Even for the face shield? I have an Icon Airmada Rubatone helmet and I want to be sure I clean it the best I can while providing proper protection to myself. Thanks for the knowledge overall!

[@martychallis9616]

Wow. Wish I had of seen this a few years ago. BTW very well presented.....thanks for sharing dude.

[@pareshw17]

My helmet visor's antifog coating is wearing off. How to remove the coating safely and completely?

[@cineychavarria9157]

What about mold? My helmet was stored in the garuage. I can remove the inside liner but not the straps. Im also concerned if mold grew in areas I can't see.

[@TheSlayrnumber1]

Is the face shield ok to use with the woolite? Like could you submerge the entire helmet in it, wash and then air dry? or even could you do that with the shield off and then submerge it or is there to many parts in a full helmet that may get damaged? Also i am one who does prefer to just skip chemicals altogether could i just wash my helmet with a warm damp rag always? Would i have to do it more often than other people who would use cleaning agents?

[@metaanalysis7373]

Hi Jaffrum, so are you saying woolite in warm water is ok to submerge a helmet in? I,ve got a matt shoei without a removable centre liner, darn it. Also woolite comes as woolite everyday, darks and delicates. Does it matter which one or all three ok? Thanks V much. My lid sure needs a good soak.

[@finnandjake6653]

I have a 2012 ls2 helmet it’s very old obviously and I’ve cleaned the padding that is removable but don’t know how to clean certain parts of it that I cannot take off and I can’t just throw it into water and clean it since it also has styrofoam inside of it Any advice? Also the chin strap is quite damaged and rusted

[@allan8458]

Hello Louie, I have GMax 35 helmet and I don't know on how to clean it. Please help. Thank you.

[@alanramirez6488]

I have an old bell helmet my friend gave at least 10+ years sitting inside shed. it's just dust dirty no rain added just plain old dirty. can I use bucket water whoolie method?

[@paxonearth]

What's a good method for cleaning non-removable chin straps?

[@tk9013992]

Very good video, easy to follow and listen to. Unfortunately the one thing i wanted to see and learn you kinda skipped. I wanted to see how to clean a matt finished helmet. You had the helmet on the table but only show how to clean the internal part. Keep up the good work and i hope see you do a how to clean a matt finished motorcycle helmet. :-)

[@yellowchocolate8539]

Everything you say sounds like a secret lmao

[@alcalu]

Can you speed up the drying process with a small fan?

[@per4594]

excelente video, una pregunta ,como puedo limpiar el casco pero externamente de suciedad rayaduras, gracias por sus comentarios

[@LordAnestis]

How often should i clean my motorcycle helmet?

[@Jafrum]

LordAnestisLuBu This is personal preference really. I usually clean when it smells :)

[@LordAnestis]

***** I bought a spray yesterday.Its a foam spray from Bel Ray,and its very effective! I think every month should be good,i don't like to wait for the helmet to start smelling,i would like to know if there will be any problem for washing it frequently,well i think with the spray there will be no problem,what do you think?

[@Jafrum]

As long as no harsh cleaners are used i think you will be fine. I ride motocross, so I clean when it is stinky (every ride or at least once a month.) I use water only no detergent or anything. Works great for me. Bugs and such may require some cleaner agent. Try using a spray after cleaning. This will make next cleaning sessions easier.

[@Jafrum]

By Spay I meant a polish of some sort, It gives a film on the helmet and make everything wipe off easier.

[@LordAnestis]

***** Ok cool!

[@amymeins3780]

Love the video was trying to figure our how to alean it because some chemicals i would have tried probably would have ended. up just spraying febreeze thank you

[@freddyt1649]

how about the sponges on the strap. i always have a hard time cleaning those and i dont think its recommended to remove them

[@smawshot0351]

Thanks Louis! I feel smarter now.

[@knightingalesaid]

Thanks Willie that was an A-1 video. Very informative.

[@Jafrum]

Thanks for watching!

[@EpicEventsPartyRentals]

Agreed. Great video Willie!

[@karlheinzderber8422]

Hallo ich habe mir auch zwei excelvan 6 Rider interphon gekauft habe ein Problem ich kann mit meiner Partner reden sobald ich mein Navi eingeht ist die Verbindung weg auch beim telefonieren wenn ich fertig bin geht meine Unterhaltung nicht mehr Frage was kann ich tun .Die Beschreibung ist alles andere als gut

[@huhfkrhf]

I have used Clorox wipes for cleaning the inside my helmet liners before lol

[@Ne0c225]

Any alternative to Woolite cleaner?

[@haripermana9407]

I'm Using toothpaste for outer shell

[@casualmanmann]

Awesome video. Very well spoken did with lots of knowledge

[@eltonesound]

Thanks for the instructions with this great video . Awesome !!!

[@kadukSnupi]

it is ok if i thy in the sun the helmet after i wash it? thank you

[@aandrew01]

Awesome video. Very informative. Great delivery. Good job. Subscribed.

[@Jafrum]

Thank you from all of us at Jafrum!

[@djlubay]

how would u clean a rubatone helmet?

[@Peter-976]

Excellent video! Thanks

[@Sougandhpavithran]

Thank you for the instructions

[@xavier415]

I cleaned my helmet with water, i put a little bit of car wax on the visor if i know its going to rain. Inside pads i washed. I do need some freshner for the inside though its starting to stink even after washing it :b thanks for the info.

[@Jafrum]

Thank you for watching, and thank you for shopping at Jafrum! - Ellen

[@tiffanyw7114]

What Windex

[@johnmotoguy1150]

That was done very well, What if you have glue from a sticker stuck on the face shield, warm water did nothing to help remove it. Its stuck good!

[@renzowen]

John Motoguy use steam.

[@akhilsanilable]

can I use CD LENS CLEANER for clearing the helmet visor?

[@BMW3ICS]

so what do i ise on my matte finnish helmet?

[@galura182]

Hey accidentally put my helmet into water, now the foam of my helmet sounds like a styrofoam scratching is there a way I can fix it?

[@xsassyxbluex]

Ive got a (mostly white but got some black and red) HJC helmet with an anti fog visor. How would i go about cleaning the shell? HJC recommends "cleaning your helmet with products designed for automotive cleaning and polishing. All HJC helmets are finished with an automotive type base coat/clear coat finish." Would someone be able to explain this to me in dummy form or link me a product I can use. I'd like the clean the outside shell, I don't wanna ruin anything though. Thanksv

[@Jafrum]

xsassyxbluex You can use any spray polish for painted surfaces. Biker spray and polish or plexus or similar product.

[@23pyromaniac]

How about if I just use some shampoo for the inner liner?

[@Jafrum]

23pyromaniac I would not recommend. The left over residue can cause a reaction while wearing the helmet. It would be a mild rash if it happened. If you do, just make sure it is rinsed thoroughly to minimize any soap residue left over.

[@23pyromaniac]

Ok thanks, and what about regular clothes washing detergent?

[@TreeFiddy-1337]

Very well done video and informative!

[@equinoxmcb]

excellent video, very thorough! now I don't feel half as clueless.

[@omkar415star]

What if i only clean em with water? Is it enough?

[@Jafrum]

Warm water and a rag is probably the best for the shell as long as the end result is a clean helmet. For the liner, water alone may not be enough if the helmet has been sweat in significantly. A very light detergent will break down the salt and restore the liners ability to absorb moisture. Thanks for watching!

[@omkar415star]

***** thanks :) just have a drying problem here as it rains 24/7 now. Dont owe a mini fan aswell

[@Jafrum]

I once had a customer that went touring in some remote areas that had no electricity. He cleaned his helmet liner in a river and dried it in a sack of rice. I said I thought that sounded a bit unsanitary. He just laughed and said something about sanitation being relative.

[@omkar415star]

***** haha. i m not much of a traveler. I wanted to wash it cause once in rain it got petty much wet and i forgot to dry it. Now some foul odor keeps coming out of it

[@Jafrum]

You definitely want to sanitize that liner. The bad odor is usually from mildew or mold. Dangerous mold usually only forms on cellulose materials like drywall but you still don't want fungus on your face. Hot water and a light detergent will take care of it.

[@joedoe7506]

great video, thanks!

[@paulovenz8037]

This guy has an incredible speaking voice

[@chrisjpeltz]

What about www.griotsgarage.com/product/window+cleaner+8+ounces.do? Would that be ok to clean a helmet visor?

[@Jafrum]

Thanks for your question. It looks like a gentle product, but I can't say for sure if it will be safe on helmet shields. It might work fine, but the product was designed for use on glass, and without speaking with the manufacturer, there is no way to be sure it is safe for use on polycarbonate.

[@mrmacdad1]

very helpful! thanks

[@endrecoterius]

Very good...

[@TheJoseef17]

Great video Thanx for the amazing video

[@cuape8002]

Thank you for a very useful information^^

[@HSvedberg]

VERY good. Very, very good.

[@mansitzilhan3943]

sayang ga ada di indonesia barang nya🙁😓

[@snakycake4790]

Thanks Lui!

[@qw43gdtyghdrth]

Last time I tried to take the liner out of my helmet the snaps broke...

[@Jafrum]

qw43gdtyghdrth Which helmet do you have?

[@Psalm-yg6yi]

Go out and buy special cleaners or use household stuff? hmm

[@fredleejohn4144]

I just put it underwater then dry under sun. done. very simple

[@Speediesam]

Wait I just watched a commercial ??

[@desertrider325]

Dam man! You know your science!

[@Shivamagrawal50]

I couldn't believe the amount of muck that my helmet spewed! Thanks dude, helped a lot

[@Coal247]

i'm stuck in the loop of thought that, i think its ok now...nahh just one ....more.... time...

[@iamkornhoolio]

warm water plus shampoo.

[@jeffreywong6095]

nice electric fan

[@kandicreations7779]

Well, its a good thing I'm a chemist lol

[@lonelywolf3209]

👏👏

[@user-su8gf2zy6b]

Lol mister know it all