How To Clean Inside of Tumbler

This is a remake of my previous “How to Get a clean rim on your tumbler”
Materials Needed:
Acetone
Dish Soap
Exacto Knife
Clean rag/ sponge
Clean Paper towels
Magic Eraser
Gloves

[@spiritwings4592]

Finally someone that addresses this important step.tky tky tky best thing to do once washed let them air dry.

[@BigGuyCustoms]

You can run Vaseline around the rim and inside your cup. Paint nor epoxy will stick to it. You can wipe everything out with no issues.

[@Luxinda]

Big Guy Customs, also silicone oil (used in acrylic pouring) around the inside of the rim stops anything from sticking then wipes and washes out.

[@BigGuyCustoms]

@@Luxinda Never heard of that. Vaseline is readily available though.

[@pepperbomb45]

I use tape on the inside of the tumbler, leaving the tape sticking up about 1\2 an inch from the rim and never get paint on the inside. But these tumblers are cute!

[@Kathy-Carr]

Great tips and you do a great job with all the details. Thank you!!!

[@savagetwin52]

You are an excellent teacher. Love you and all ur videos ❤❤❤

[@chasitymunoz1982]

Thank you for all of your content. You are talented for sure .

[@madmommy]

Bless you for this video. I’m brand new to this, and I’m working on tumblers for nieces and nephew and just noticed all the spray paint that got inside. Found this wonderful video!

[@bernicestocker4100]

You have to wet the Magic Eraser really good when using it for anything. Im so glad you did this video. TFS

[@Theresa914]

great video, I cut my sponges (like the yellow one) and magic eraser into 4 rectangles so it will be big enough for the job and last longer. I loved your alcohol ink tumblers.

[@lostdud]

Extremely informative excellent thanks

[@doraalvarez1259]

Thanks so much it helped me tremendously 🙏

[@jessicasego8315]

This is awesome thank you!!

[@angelakay2031]

Thank you so very much so glad i found you

[@aprilmaston]

Thank you for the great information!

[@arlenesutton8456]

Thank you for this video.. I am a Newby and I usually line the rim with painter's tape... I watched this video because I forgot to tape the inside rim of my latest tumblers and got paint in them. I was trying to figure out how to fix this issue. Thank you.

[@marlohoaglan3936]

Thank you so very much.

[@nside411]

You have to soak the magic eraser so it doesn't rip apart .. you can get 4-5 uses or more out of it. Thanks for sharing the video... and thanks to the other comments with added tips 👍🏻 😁

[@debrajol3585]

Acetone because I’ve got too much to do. But the other comment or who says Vaseline/petroleum jelly sounds like a good idea. Have you tried this yet? If not, it’s been a while since this video sooo I’m thinking maybe someone reading this has 😁 Thanks for sharing 👌🌹✌️

[@chasitymunoz1982]

You are very good at explaining in detail . I am new at this and just got after it yesterday for the first time . I jumped the gun for sure and should of watched your videos first. Either way I’m going out tomorrow to get some alcohol to prep the tumbler. I want to ask if you ever use mod podge before applying glitter

[@MissKissKreations]

Thank you for watching my channel! I am happy to help! And yes, I have used mod podge to apply glitter, Here is a video! kzbin.info/www/bejne/opqraJubqs-WgrM

[@JC-lj4gs]

Hi Miss Kiss, ty for sharing this! Do you have any videos or tips on how to remove scratches from the inside of tumblers? I accidentally scratched some and nothing I tried has worked.

[@sammiei6803]

Love this! Just a question, I do a similar process as you when cleaning my rims and insides however I was always told that when removing the excess on the rim it’s breaking the seal and I would need to add another super thin layer. Is this true or can I skip that step??

[@MissKissKreations]

If epoxy is removed incorrectly , yes, the sea can be broken. Make sure you are only removing the epoxy from the rim. Not necessarily the lip of the tumbler. If you start seeing the epoxy separate from the tumbler, the seal has been broken and you will have to re epoxy

[@briander102]

What should i use to clean the inside of a tumblrs that been used for all kinds of drinks such as hot/ice coffee, flavor water, and soda??

[@MissKissKreations]

I use acetone. Or you can us bar keepers friend. Or wipe away with a magic eraser. Make sure you thoroughly clean your tumbler after cleaning it out.

[@tamikka09]

TFS

[@MissKissKreations]

My Pleasure!

[@LISALUCKIE]

Great video/instructions. Non related question. I know you use aluminite and I actually love it but I’ve heard that it yellows so I only use it on dark cups but I love the glass finish it gives. Have you had and issue with aluminite in your white tumblers?I’v

[@MissKissKreations]

Thank you so much! I’ve never had a problem with my epoxy turning yellow on lighter or white tumblers.

[@stephaniedaugherty5201]

Can you use the nail polish that's 100% Acetone?

[@MissKissKreations]

I’m sure that will be okay :)

[@karigirardin7741]

Do you have to wait for epoxy to be fully cured before this process?

[@momzmoviez]

Most definitely!

[@jamiepfeiffer6005]

My inside still smells like epoxy how can I get the smell out ? The cups been sitting for over a week

[@miltonmadness1]

Can you run these through the dishwasher once they have the epoxy coat?

[@MissKissKreations]

These are recommended to you have wash only

[@momzmoviez]

Never!!!

[@jessica4961]

Hi! So after I finished my tumbler, I hand washed it with dawn dish detergent and now the epoxy looks cloudy. Any advice how to prevent this or how to shine it back up?

[@MissKissKreations]

Hey there. Looks like you didn’t seal The top your tumbler. You Have to Make sure you don’t have a little a gap between the epoxy and tumbler or the water will get in between and the tumbler will cloud

[@andriannabradley257]

@@MissKissKreations so how do you reseal your tumbler?

[@kristajones815]

I let my epoxy cure for longer than the recommended time, I cleaned the rim and washed it inside and out like in the video, but now the epoxy looks cloudy. Can I polish it or should I put another coat of epoxy on it?

[@MissKissKreations]

You may have mixed it too quickly, causing it to look cloudy

[@MissKissKreations]

I would strip the tumbler. If you epoxy over, you will still see the cloudiness.

[@kristajones815]

I actually epoxies over it and it was clear again. It wasn't until I washed it that the cloudiness showed up. I'm still weary about washing it again, but I've let it cure for over 48 hours.

[@j_b_1236]

How do u get the smell and taste go away ?

[@MissKissKreations]

When the tumbler air cures, there is no smell and no taste

[@kristyalarcon7277]

Stupid question is this nail remover 100% acetone or painter 100% acetone?

[@MissKissKreations]

Yes. They are. And no question is stupid!

[@andriannabradley257]

I washed my tumbler and now its dull looking. What did I do wrong

[@MissKissKreations]

Re Epoxy It