How to clean your Glock with Breakthrough Clean

Рет қаралды 25,828

Күн бұрын

Пікірлер: 24

@leoguy1609 Ай бұрын

In 50 years have never had an issue with bronze bore brushes and find Nylon bore brushes to be inadequate! Do like Breakthrough cleaner and their lubricants, they are okay, but prefer Weapon Shield. BTW you cleaned the breechface wrong. You should hold the slide upside down, to reduce the chances of solvent and debris from entering the firing pin channel.

@andrewevanoff1192 6 жыл бұрын

Try using their teflon grease on the slide guides and the barrel. It feels "butter smooth" after that.

@AK-ky3ou 2 жыл бұрын

I understand if you clean and oil after every shooting session, but what about the oil on the frame trigger mechanism? If you aren’t cleaning that area and you are oiling it after every session, isn’t there way to much oil in there?

@BarryNewmanboenairgeez56 7 жыл бұрын

Love it nice job. Pipe cleaner gets behind the extractor very well.

@JnourseNZ 7 жыл бұрын

Thank you Boen, I'll pass on your compliments to Sheng.

@ratagris21 4 жыл бұрын

So will a patch by itself if you can thread it behind which not so hard do to on most semi auto pistol.

@ericr8618 4 жыл бұрын

Great video

@Tacsolcorp 4 жыл бұрын

Thanks Eric, appreciate it.

@musicfan07058 6 жыл бұрын

Do you oil the gun before you shoot it or only if you're not shooting for long periods?

@Tacsolcorp 6 жыл бұрын

Hi, you only oil it when you're not going to be using it for a little while. Personally I give it an oil at the end of every clean and then run a dry patch through it the night before I shoot. When you're shooting you don't want to have any kind of oil in the barrel. The reason being, if you do shoot and there's a coat of oil, the projectile is traveling so quickly that it will pick up the oil as it travels along the barrel and can cause a blockage and blow your barrel. - imagine when you're in a swimming pool and you move your open hand underneath the water, same effect, just much faster.

@musicfan07058 6 жыл бұрын

@@Tacsolcorp thank you that clears up my confusion

@ckbun 5 жыл бұрын

Tactical Solutions Ltd Hi what about the springs and other internal parts (not the barrel)?

@Tacsolcorp 4 жыл бұрын

rayraybun they’re good to keep the oil on. Only the barrel that needs to be free.

@Tacsolcorp 4 жыл бұрын

Hopeless I’ve never experienced it personally, but shooters older and wiser than myself have always warned against it and given the same explanation.

@jmedi5589 6 жыл бұрын

Wouldn’t it be cleaning a firearm with battleborn or breakthrough the same as cleaning it with any other miracle firearms maintenance solutions?

@Tacsolcorp 6 жыл бұрын

I guess it would seem so at the surface, but the difference is that Breakthrough is Mil-Spec and has a proven track record with the Military. Most places that sell it have sample packs - give it a try and see for yourself.

@denvergriffin5555 2 жыл бұрын

You can waste a lot of time cleaning Glocks - they need little of it. Bore snake the bore and barrel before and a couple after a shooting session. You can lube it with as little as four drops of oil. Twice a year (if you shoot weekly) disassemble your Glock fully - an utterly simple process - and clean the entire firearm and all its parts (with 91% isopropyl alcohol (cheap, great solvent, evaporates very quickly). All you need is to soak every part with alcohol and wipe them clean - push patches or a small old T-shirt mini-rag around the nooks and crannies with a small pointed stick or rod. (Even easier - drop it all into an ultrasonic cleaner.) You do not need brushes, rods, chemicals, scrapers, and all the rest of the crap people try to sell you. Watch the guy in this video with the brushing - good grief - all that would do is move carbon particles and flakes around and probably push them into nooks and crannies that would be worse than leaving them alone. Pure nonsense. Shoot more, and if you cannot shoot, dry fire more, and spend less time on superfluous "cleaning" of Glocks that is erased after the next few magazines you shoot- they simply do not need the kind of TLC that some firearms do need.