How to clear or remove "Time for replacing Felt Roller " error in Taskalfa 620 or Kyocera KM 6030

Hi friends in this video i will show you how to clear the error "time for replacing the felt roller " in TASKALFA 620 or KYOCERA KM 6030.
To clear the "Time for Replacing Felt Roller" error on Kyocera Taskalfa 620 or Kyocera KM 6030 printers, follow these general steps. This error indicates that the printer's felt roller, which helps with paper handling and transport, needs replacement. However, before proceeding, ensure that you have a replacement roller on hand, as ignoring the error can lead to printing issues.
Steps to Clear the "Time for Replacing Felt Roller" Error:
1. *Replace the Felt Roller:*
- *Turn Off the Printer:* Make sure the printer is turned off and unplugged to avoid any electrical hazards.
- *Access the Felt Roller:* Open the appropriate covers to access the felt roller. For most Kyocera models, you will need to open the front or side cover.
- *Remove the Old Roller:* Locate the felt roller and carefully remove it. Depending on your model, you might need to unscrew or unclip it.
- *Install the New Roller:* Place the new felt roller in the same position as the old one. Ensure it is properly aligned and secured.
- *Close the Covers:* Once the new roller is installed, close all covers securely.
2. *Reset the Error Code:*
- *Turn On the Printer:* Plug the printer back in and turn it on.
- *Access the Service Menu:* You will need to access the printer’s service or maintenance menu to reset the error code. The process can vary, but typically involves:
- Pressing a combination of buttons on the control panel.
- Entering a specific sequence or code. For many Kyocera printers, you might need to press and hold the "Utility/Counter" or "System Menu/Counter" button, or enter a specific maintenance mode.
- *Select the Reset Option:* Once in the service menu, find the option to reset or clear maintenance messages. Select the option to clear the "Time for Replacing Felt Roller" error.
3. *Verify the Reset:*
- *Print a Test Page:* After resetting the error, print a test page to ensure that the error message has been cleared and the printer is functioning correctly.
Additional Tips:
- *Consult the Manual:* Always refer to the specific user manual or service manual for your model. The steps can vary slightly between different models.
- *Professional Help:* If you’re unsure or uncomfortable performing these steps, consider contacting a professional technician or Kyocera service provider for assistance.
- *Regular Maintenance:* Regularly perform maintenance as recommended by the manufacturer to avoid future issues.
If you follow these steps and the error persists, there may be additional underlying issues with the printer, and professional service might be necessary.