How to- Coleman 18x48 Power Steel Swim Vista II Above Ground Pool

This is a video of our Coleman Power Steel 18’x48" Swim Vista II Above Ground Pool and how I set it up. I am not sponsored by anyone. Also, I am new to uploading videos, so I apologize for the lack of professional production quality, sound, shoddy camera work, etc.. As the channel evolves, hopefully, I get better at it!
Here is the list of items and approximate costs I had from start to finish.
1. 18’ Coleman Vista II Pool $400
2. Intex 16” Sand Filter/Saltwater pump system. $300
www.amazon.com...
3. Intex skimmer-$25
4. 18-12”pavers as base for pool legs. $25
5. 6-16” pavers as base for filter and ladder. $40
6. 20'x20' 16 mil tarp for pool to sit on- $100
7. Sand for pool base-$100
8. Filter #20 Silica Sand-$40
9. Pool salt-$50
10. Ladder foot bath-$15
11. Sod cutter rental-$95
12. Sod roller Rental- $25
13. Misc Pool Chemicals-$60
14. Rubber mulch-$150
15. 4-Solar Lights- $25
16. Water to fill pool-$????
Total- $1450
"CoolDadStuff" is my channel where I talk about home improvement projects, cooking, hobbies, RV's, music and any other trivial things that my kids refer to as "Dad Stuff." The info contained is not just for dads, but for anyone that might find it useful.
Feel free to comment or ask questions and/or Subscribe. Thanks for watching!

[@pearlofyahuah8472]

I think we all agreed this is the best looking above ground pool 2020

[@cooldadstuff2988]

Pearl of YAHUAH thank you!

[@stevevalk8898]

I just got done putting up my new 18x52 intex. My previous 18x48 lasted 5 years but i had put plywood underneath and did not put any pavers under the legs. Things started shifting so it was time for a new one. I spent 3 weeks getting the ground level and a lot of dirt to move. The best thing i did was to use a water level to set the pavers. I got that pool water level to a 1/8 of an inch

[@michellelee2030]

Love the rubber mulch idea, thanks 👍 your pool looks great and the set up is nice and clean!

[@ryansamala2909]

Glad I came across this. This is exactly what I plan on doing. I used to build above ground pools for a living before these quick sets were ever a thing. I wasn’t about to just plop this thing out. This is 100% how I planned on doing mine. Nice to see people do things right. Great job. Wondering how it’s doing after 2 years

[@cooldadstuff2988]

Thanks! Check out my latest video. kzbin.info/www/bejne/qmPFd4GjesqLe7M

[@stevestratton1888]

Well done on the pool install. It really looks nice. My wife is sending me to the store tomorrow to get the exact same pool and I will definitely be setting it up in a similar fashion.

[@totalnoobfishing1753]

Just set my Intex 15 x 42 yesterday, first time COVID pool owner. Amen to 2 things you said, #1 YOU NEED PAVERS, #2 Water fill up day is an ALL DAY TASK, every 30 minutes monitoring those legs with a level. Walking around every 30 mins, gently tapping to level

[@cooldadstuff2988]

yes! It's a chore, but you have to stay on top of it or can get out of whack real quick. Good luck!

[@totalnoobfishing1753]

@@cooldadstuff2988 Thanks again for the great video\content... very helpful.

[@cooldadstuff2988]

TotalNoobFishing thanks, I’m going to be working on some follow up pool videos. Stay tuned!

[@stevevalk8898]

TotalnoobFishing I used a water level to set my pavers.I got within 1/8 of an inch. Works great and cheap. Make your own

[@CesarHuert1915]

We just bougt this pool yesterday and this is a great review and pretty awsome set up. I just hate the fact that im going to mess up my backyard grass😭

[@mistylace5968]

Nice looking pool and yard. Thank you for sharing.

[@shannonmorrow2399]

Thanks for the video. I have to redo mine. About 5 of my legs sank into the sand as it was filling and I wasn't there to watch it. So now I have to drain it and block up those legs. The rest is pretty level. Over all quality if the pool is great. The pump not so much.

[@ratfinkron5793]

Well done did a great job

[@MAXED-TRUCKING]

Nice job. Mines came out a disaster 😂. I'm waiting on a new liner and leveling perfectly this time around. You did an amazing job.

[@cooldadstuff2988]

b3ar0fab oh no!! Yes, no matter how long it takes, it needs to be on solid, level ground. Good luck on round two!

[@MAXED-TRUCKING]

@@cooldadstuff2988 thanks a lot. I'll need it. My property is extremely hilly🥺.

[@scot73058]

Beautiful. Just got mine today. Hope its just as nice.

[@cooldadstuff2988]

Good luck!

[@timskywalker1132]

Thumb up ! You did a great job and it turn out really nice. I will be installing mine in the next few day and this really help me with some great tips

[@cooldadstuff2988]

If you haven't seen them, I have a few videos on my channel. The second one goes into some of the finer points.Might be helpful before installation.

[@871jamie]

I don’t care how level the ground is ( got mine perfect from 6” off and I also own a pool business ), your poles are never going to be perfectly level. You pull one out and the strap will pull the next one in etc. my poles aren’t all near a perfect level but my pool is within 1/2 inch on the water line all the way around. Looks good!

[@jasonpaul82]

I dig your set up so using your idea. !!!!

[@cooldadstuff2988]

Thanks!

[@bm3211]

I wish you would have made the video showing how you did the concrete blocks your pool looks great and I'm stuck right now trying to figure out how to do the blocks

[@cooldadstuff2988]

It’s in my second video. Check out my other stuff!

[@bm3211]

@@cooldadstuff2988 i seen your reply on another comment so I did.

[@johntrailer1604]

What a neat installation

[@JinxDClown]

You should make a wood stair case that covers the pump (with each side of the staircase having a door to access the pump).

[@cleomaddiem3581]

Exceptional video ... thankyou. I'm setting my pool up in a similar way here in Melbourne, Australia!

[@ruthramosmuniz164]

The pool looks awesome. I have that same pool.

[@cooldadstuff2988]

Thanks, I just posted a follow-up video to this one. Check it out when you get a chance. Enjoy your pool!

[@HandbagDiva]

The pool looks great, I love the rubber mulch surround. How has it held up going in year 3?

[@kweenkashmereiman]

Will the grass come back under pool if ever take pool down? This is beautiful

[@cooldadstuff2988]

No, I’d have to put down new sod.

[@kweenkashmereiman]

@@cooldadstuff2988 oh okay Thankyou looks very beautiful 😻

[@JuiceBoxJunkies]

looks so inviting

[@Guymeqo]

Hi ...how much would u say u spent in total w everything xtra ??

[@Aly_2710]

Hello - how many yards of sand did you use? Your pool looks wonderful. I hope mine comes out as good!

[@cooldadstuff2988]

Hi, I used approximately one yard. It may be about 1.5 inches thick at the most in spots. After cutting out the sod, it was pretty close to level and I didn’t have to do a tremendous amount of fill to even things out. My soil is not rocky, so I don’t need a large sand buffer.

[@erikmc6385]

Thanks dude.

[@shareeplayle2693]

The person putting the pool together cannot Connect the outlets to the filter because he says theirs parts missing? Right now the connection to loose.

[@alejandrazapata7781]

Might be dumb question, but What helps sand not move outwards ? I plan to use sand but was told I needed a border to hold in.

[@cooldadstuff2988]

No sand will come out from the bottom once it’s filled.

[@2koolaree]

Great video - Thankyou. Did you say that your pump system is a salt water system?

[@cooldadstuff2988]

Thanks! Yes it is.

[@cityfarmer2665]

The first mistake is not using flex paint on the metal frame. Next put dryer sheets in both ends of each opening on the rails. It will keep the bees out. Nice leveling job.

[@cooldadstuff2988]

Yah, probably a good idea. This frame is basically like one of those kids metal swing sets, which anyone that has ever had one knows they rust out in a few years. In my case, the salt water will most likely expedite the corrosion process. For now, I'm probably going to use some clear sealant and some brown electrical tape. Also, I'm working on some prototype rail guards that should help keep the sun from scorching the rails and block splashing.

[@shandrag6329]

What would you recommend when setting this pool up on turf? How would I level it perfectly and what would I use? If anyone owns a pool and put it on turf please give me some tips

[@cooldadstuff2988]

Artificial grass? Is it sloped? Depending on how far off it is, you would probably have to put down some sand. If you intend to preserve the turf, maybe put down a tarp first, then sand, level it, then another tarp on top. I recommend a tarp on top of sand to prevent making divots in the sand while putting the pool together, because you’ll be walking around inside it as you’re assembling it and trying to even it out as you fill it.

[@shandrag6329]

@@cooldadstuff2988 yes it’s artificial grass. It’s a flat area, but not sure if it’s 100% level. I’ll have to figure out a way to determine if its level. The sand and turf sounds like a good idea. Thanks for replying

[@audreygatto8330]

How much sand did you buy…also how much rubber mulch? And (I’m sorry for all the questions) how did you hide the tarp bc it’s 20x20. Thanks

[@cooldadstuff2988]

I believe I went through about 1.5 yards of sand and 20 bags of the rubber mulch from Lowe’s. Results may vary ...😀

[@audreygatto8330]

The 18 pavers you got for the legs…they were 12x ?

[@cooldadstuff2988]

@@audreygatto8330 correct

[@audreygatto8330]

@@cooldadstuff2988 12x12?

[@twistandsproutmicrogreens]

At 4:04, the post bottom at the far left, pump side, is too far in and I'm thinking you can feel that leg inside the wall. If you take a car jack and a 2 by 4, you can lift the t bar a bit and it will kick out on its own. Also, I had the same pool and the windows leaked...any issues with yours? You did an AMAZING JOB!!!

[@cooldadstuff2988]

They all touch the sides slightly, but if the posts are perfectly vertical, it doesn’t cause any indentation and you cannot feel them from inside. No leaks so far on the windows. Fingers crossed!

[@joelhernandez41]

You did a really good job. Do you plan on taking the pool down for the winter or feel the material can handle the cold?

[@cooldadstuff2988]

Joel Hernandez I plan on leaving it up. Where I live, it doesn’t freeze, so I’m not all that concerned. The thought of having to routinely take it down each year and set back up doesn’t sound very appetizing. I’m sure in certain parts, that’s probably best. I did get the 3 year plan from Walmart, so if it fails, then so be it. Hope it doesn’t, but it’s definitely not made to last a lifetime.

[@ladyrenaissance2026]

It can handle the cold. I live in Buffalo NY.....it GETS COLD AND FREEZING!!! I used pool antifreeze and a good cover. No damage whatsoever to the pool liner or the steel legs. I just have to get a better cover this year because it kept coming off or sinking in it and i have alot of algae im currently cleaning which is a pain

[@janetwalts8362]

Any tips on keeping the windows clear

[@rfs056]

It looks great!

[@EveryDayNY]

Did you put the rubber mulch under the entire pool or just around it?

[@cooldadstuff2988]

Only around it

[@TheRegularShoeGuy]

How did you fill the pool is there somewhere to hold water hose

[@cooldadstuff2988]

Just throw the hose in and turn it on. Nothing special

[@vanessawarren9717]

How much sand did it take to fill your filter? Did it take more than 2 (50lb) bags? An how much salt do you need to add for this pool?

[@johnsmith-wl9lq]

wow looks great! very nice job. Do you anticipate getting grass in your mulch when you mow being a pain?

[@johnsmith-wl9lq]

@@cooldadstuff2988 Ok cool. This is the best job I've seen yet. I've been doing a ton of research lately and this right now is the best one I've seen by far. Hopefully those windows don't leak like the vista 1.

[@Dawnamae]

Where do you live we are on the east coast of Canada and are going to be setting up our first pool similar to yours. Same brand different shape. Did you have to take it down at the end of summer? Thanks

[@cooldadstuff2988]

We’re in Southern California. I leave it up year round.

[@Champ0204]

How deep you make your rubber mulch? Tired of puddles on the side. And does rubber mulch really make weeds not grow? Thanks

[@cooldadstuff2988]

The mulch is only a couple inches thick, Unless you put down weed guard, they’ll just grow through it just like any other mulch. I went with the rubber stuff because it seemed less risky than wood mulch potentially poking the liner. In the past, I have encountered nails, pencils, and all kinds of pokey things mixed in regular wood much.

[@Champ0204]

@@cooldadstuff2988 wow would of never expected things like that to be in mulch thank you for the info!

[@SuperDally2]

Do the road pavers rub on the bottom side of you pool reason I’m asking because I’m about to put those on my pool and want to know before I do

[@cooldadstuff2988]

No, check out my second video, I talk about it there.

[@cooldadstuff2988]

You could dig out so they are in the ground and it surely would not. I did not go that route.

[@ThaKidDelcid]

So I found the pump but can you tell exactly which one you got please there was quite a few

[@cooldadstuff2988]

This is the exact one I have: Intex 26679EG Krystal Clear 2150 GPH Pump & Saltwater Sand Filter Saltwater System, White/Black www.amazon.com/dp/B07TN3JQ2P/ref=cm_sw_r_cp_api_glt_fabc_XF9TETPGKFMWM19XEB9P?_encoding=UTF8&psc=1

[@ThaKidDelcid]

@@cooldadstuff2988 thank ya sir!

[@SammyDoesSlots]

do you have to get a permit to put this pool up?

[@cooldadstuff2988]

Every city is different. You’d have to check. I spoke to the city inspector directly and he told me that all they really care about is a dedicated GFCI plug for the pump, but going after people over a temporary pool was pretty low on the priority list.

[@SammyDoesSlots]

@@cooldadstuff2988 thank you so much for your reply. I truly appreciate it 🙏

[@kimjohnson2242]

Are you in Gerogia? Need my pool set up

[@terizefarmer51]

My mom just got this pool. I want to know how much sand do we need?

[@cooldadstuff2988]

Once I leveled the dirt, i used about 1.25 yards of sand to make it nice and smooth on top, approximately 1-2” thick. I bought bags of sand at Lowe’s instead of bulk. Don’t recall how many, but it was a lot of back and forth with the car.

[@akipabalan1760]

Hi there! Thanks for the video, the pool looks amazing! Did you level the pool leg pavers with the rest of the ground/ dig to create a slot for the pavers or did you level the pavers only with the rest of the pavers?

[@cooldadstuff2988]

Just with the rest of the pavers. It would have been a lot more effort for me to dig them out beforehand. Also, you’re adjusting things as the pool fills. I probably would have been way off had I tried it that way.

[@cooldadstuff2988]

Also, you can check out my second video. I go into it more.

[@chrisstiffler2185]

@@cooldadstuff2988 curious on spacing as my pool hasn’t arrived yet: 1) center to center on the legs? How many inches? 2) size of pavers- 12x12’s? 1” thick? Looks fantastic!

[@cooldadstuff2988]

@@chrisstiffler2185 check out my second video for more details. Yes, 12x12x1”

[@chrisstiffler2185]

@@cooldadstuff2988 I did watch, like, & subscribe however, you didn’t mention the paver sizes nor the pole spacing, that’s ok. My pool arrives next week, I’ll cover those dimensions more in detail in my video. Thanks for the reply! GodBless

[@Andr1919]

How did you keep the pavers from digging into the pool? I’ve put pavers under our legs and you can feel them digging into the side of the liner.

[@cooldadstuff2988]

Check out my video #2 describing that issue. Starts around 3:00. kzbin.info/www/bejne/Zn29gX57pJeNmpY

[@cooldadstuff2988]

If the pool is filled now, you can pull them back, but takes some muscle for sure!

[@emtravelrn1]

I watched your video earlier in the summer. Your setup looks very neat & clean. I realize that you replaced the cartridge filter pump that comes with the pool (the 90401E), but by chance do you recall which filter cartridge size goes in it? I just purchased a used one to outfit a stock tank pool for my parents.

[@cooldadstuff2988]

It should be something similar to this. I believe the filter says "III" on it. Same measurements www.target.com/p/bestway-58012-swimming-pool-filter-pump-replacement-4-2-x8-cartridge-type-iii-a/-/A-76070246?ref=tgt_adv_XS000000&AFID=google_pla_df&fndsrc=tgtao&CPNG=PLA_Sports%2BShopping&adgroup=SC_Sports&LID=700000001170770pgs&network=g&device=c&location=9031520&ds_rl=1246978&ds_rl=1248099&gclid=EAIaIQobChMI7bjOhPzP6gIVdSCtBh3meAuUEAQYAiABEgLLt_D_BwE&gclsrc=aw.ds

[@statikblue2012]

Did the windows ever leak?

[@cooldadstuff2988]

So far, so good.

[@yaneliscruz7825]

I bought this same pool about how much sand would I need to do this project , pounds, please let me know ASAP !

[@cooldadstuff2988]

For the 22’ circle I cut out, the sand is about about 1.5” deep. I went through about 1.5 cubic yards of sand.

[@yaneliscruz7825]

Okay thank you so much

[@gangalee83]

Where did you get the tarp for pool to sit on? I have a 20x48 best way pool. What size tarp do you recommend to put under the pool?

[@cooldadstuff2988]

My pool is 18’. I wanted an extra foot all the way around and went with the 20’. Very thick material and unlikely anything will poke through it. 20' x 20' Super Heavy Duty 16 Mil Brown Poly Tarp Cover - Thick Waterproof, UV Resistant, Rot, Rip and Tear Proof Tarpaulin with Grommets and Reinforc www.amazon.com/dp/B072592JHF/ref=cm_sw_r_cp_apip_WPvYUBlMjVmFm

[@albertzasranets]

So, you have 1 foot all around or 2 ?

[@johnking3728]

pretty nice , enjoy

[@e.jackson1308]

Is there a specific size in the hose clamps that you can recommend?

[@cooldadstuff2988]

Not exactly sure, but definitely get the metal type. The plastic ones that come with the pool are worthless.

[@e.jackson1308]

@@cooldadstuff2988 ok thanks

[@meganburris9403]

How many pavers did you need?

[@cooldadstuff2988]

One under each leg, so I believe it was 18

[@meganburris9403]

Thank you!!

[@valgarion03]

Hi, your pool looks great! Did you place your pavers on top of the tarp or are they directly on your ground?

[@cooldadstuff2988]

Goddess1111 they are just on the ground. Check out my other video. I go into more detail on it. kzbin.info/www/bejne/Zn29gX57pJeNmpY

[@jerimyclonch7858]

Has anyone use gravel next to this type of pool ? Wonder if it would be ok

[@cooldadstuff2988]

Probably fine if it’s the small stuff, like pea gravel. Definitely not the larger, jagged pieces.

[@jangrisham6114]

Hey I just purchased this pool 2 months ago and I love it. But unfortunately about a week ago I noticed that the pump sounded like it was noisier than usual. Have checked it and saw no debris so not sure what is causing the noise. Unfortunately cannot seem to find anywhere on the internet about getting a replacement pump. I did not get the extended warranty on the pool so since it's been more than 30 days I'm not sure they will replace it. But worse than that I cannot seem to find a replacement pump for it. I actually had an extra pool pump here that was for a 16 foot Summer Waves pool but it will not fit.do you have any suggestions? I don't have a clue what type of pump would be comparable to this one.

[@cooldadstuff2988]

Jan Grisham hi, not sure if you registered the pool, but Bestway (Coleman just licenses Bestway pools) it came with a basic warranty on the pool and coverage on the pump. If you registered it, they doubled the warranty period. Should be in the paperwork that came with the pool. When you say it won’t fit, are you referring to the inlet and out hose connections? The hoses for the pump it came with are 1 1/2”, where as the two smaller ones that connect to the side of the pool are 1 1/4”. Is the Summer Waves pump the wall mount type? If so, I don’t know if there’s really any way to use it on this pool.

[@myabianca2797]

Hi there, I was wondering if you used a pool heater? If so what brand did you use? As I have this exact same pool !

[@cooldadstuff2988]

No, we have no use for a pool heater here. All I can say is the included black cover does heat up the pool fairly quickly. You can also check this review kzbin.info/www/bejne/mYHYoaN3aMqiqtU

[@audreygatto8330]

Hey can you tell me where you purchased the small umbrella?

[@cooldadstuff2988]

Don’t recall, probably had it 15-20 years.

[@louisvigil3439]

How fra apart are your pavers?

[@cooldadstuff2988]

Not sure, there’s one under each of the legs. I used the 12” pavers

[@tazcrazy8183]

💯💯💯

[@1sogybisc]

How is that sand filter doing now?

[@cooldadstuff2988]

So far so good. No issues since getting the replacement unit.

[@DanielRodrigues-xi4we]

Great job! The clear silicone that you placed on the T joints, how has that held up?

[@cooldadstuff2988]

Daniel Rodrigues completely sealed still. There is slight movement of the frame with swimming, but it flexes. No issues.

[@DanielRodrigues-xi4we]

Any specific clear silicone you used or was it like normal clear bath and kitchen silicone?

[@cooldadstuff2988]

Daniel Rodrigues check out my other video. More details shown kzbin.info/www/bejne/Zn29gX57pJeNmpY

[@ashleymead3882]

Do you have a photo of what came with the pool to drain it?

[@cooldadstuff2988]

Ashley Mead no, there’s just a drain plug near the bottom outside edge of the pool liner.

[@aracelirigney5560]

how many chlorine tablets did you use? and did you add them in with the filter pump?

[@cooldadstuff2988]

Depending on your water conditions, you may have to add various other chemicals to get the ph right, etc. As far as chlorine goes, I keep a 3” tablet in the floatie duckie and I add 1/3 of the 1 lb shock bags every 3-4 days. I had my water tested the other day and was near perfect score. They were pretty surprised.

[@athenaslust]

how much did this pool cost you?

[@cooldadstuff2988]

The pool was about $400 at Walmart.

[@andrepandohie582]

Did the tarp go underneath or above the sand?

[@cooldadstuff2988]

Above

[@andrepandohie582]

@@cooldadstuff2988 what do you think about pebbles underneath the sand?

[@cooldadstuff2988]

@@andrepandohie582Unlike sand, It could be tough to level and not shift and create dips when setting up the pool and walking on it.

[@andrepandohie582]

@@cooldadstuff2988 how long have you have your pool? And any major dips? I’m asking because my ground is on clay and I want to make sure I have no issues later down the road.

[@cooldadstuff2988]

@@andrepandohie582 I completed it 6/1/20, no dips. We have clay dirt as well. I added about 1” of sand to get it level. I was not interested in trying to move that hard dirt by hand.

[@andresmit7970]

Please help me with side poled

[@cooldadstuff2988]

What’s the problem?

[@andresmit7970]

@@cooldadstuff2988 my side poles has rusted away looking for new poles

[@pearlofyahuah8472]

Niiiicccceeeee

[@DanielRodrigues-xi4we]

How much sand did you use?

[@cooldadstuff2988]

Daniel Rodrigues my area was fairly close to level after taking out the sod. I only needed about a yard. There are material calculators online to help estimate how much you need based on dimensions and thickness.

[@jenikeenan3166]

Can anyone tell what size filter this pump takes? I have the pump that comes with this pool. Thank you.

[@cooldadstuff2988]

It should be something similar to this. I believe the filter says "III" on it. Same measurements www.target.com/p/bestway-58012-swimming-pool-filter-pump-replacement-4-2-x8-cartridge-type-iii-a/-/A-76070246?ref=tgt_adv_XS000000&AFID=google_pla_df&fndsrc=tgtao&CPNG=PLA_Sports%2BShopping&adgroup=SC_Sports&LID=700000001170770pgs&network=g&device=c&location=9031520&ds_rl=1246978&ds_rl=1248099&gclid=EAIaIQobChMI7bjOhPzP6gIVdSCtBh3meAuUEAQYAiABEgLLt_D_BwE&gclsrc=aw.ds

[@wandamoore265]

i have one and its inpossible to put together

[@cooldadstuff2988]

At certain stages, it’s definitely a challenge. Good luck with it.

[@angelabiskner1700]

Do you have the part 1 video on your pool install?

[@cooldadstuff2988]

This is the part 1. Part 2 goes into more of the setup details.

[@gravytrn]

Can you provide the model number for the pump? And did you have to modify the hoses to fit? Thanks.

[@cooldadstuff2988]

Here's the one I got. www.amazon.com/gp/product/B07TN3JQ2P/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 No, I did not modify the hoses "yet." For now, i'm using the 1 1/4" inlet hoses that came with the pool and the included "T" connection to the 1 1/2" hose that goes into the leaf basket. At some point, I may upgrade the 1 1/4" hoses (as they seem kinda cheaply made) and add a "T" plunger valve. For now, my skimmer is picking up any surface debris and I'm not needing to open the pump basket for anything. For whatever reason, the "T" plunger valves are selling for ridiculous prices online, so I'll wait. The included black plugs for the inlet hoses are just fine for now. About the pump, i'm going to do a follow up video soon and the pump is one of my topics. I'm having an issue with the chlorinator "tripping" I currently have the chlorinator deactivated. I contacted Intex and they are sending me a new sensor. Hopefully, that does the trick. If not, I'll just run it as is and supplement with chlorine. BTW, you still have to use chemicals in the pool. The Salt system is just one aspect of it. If the salt system becomes an issue, I may just drain the pool next season and forget it.

[@aaronluce15]

where did you buy the intex pump? i am trying to buy one at this moment but they keep going out of stock!

[@cooldadstuff2988]

aaronluce15 I got it on Amazon, but that was mid-May. I think due to Covid, demand has jumped big time, but the supply coming in is limited. When I called Intex, they didn’t have any ETA on pools. I assume that goes for the pumps, too.

[@WarChief5150]

Do you recommend rubber mulch for a rubber pool also? I just received a family pool yesterday but I have dirt for a back yard. Any tips would be greatly appreciated. Nice pool you have set up.

[@cooldadstuff2988]

So far, I'm really liking the rubber mulch. I only have mulch for aesthetic purposes, so if you're going to use it, I suggest the rubber stuff as opposed to the standard wood bark. It is more expensive, but may prevent an accident from a stick poking the pool.

[@cynicalsayonara7169]

I don’t have that much time to spend on a $400 dollar pool. I put put pavers and sand down and said good luck.

[@cooldadstuff2988]

It was Covid. I had lots of time.😀

[@cynicalsayonara7169]

@@cooldadstuff2988 ok, I lie. I spent days leveling the pavers and sand. I’m just jealous that it’s not as pretty as yours.

[@cooldadstuff2988]

@@cynicalsayonara7169 thanks, it’s not easy, that’s for sure.

[@tashareed7589]

We have that pool

[@nazifarashid3569]

Can you please send me the link of this pool I can’t find it anywhere

[@cooldadstuff2988]

There is no link. I had to go to Walmart several different times when they first opened and finally got lucky. They are reallllly tough to get right now, especially when the stores refuse to tell you when they might get some and they will not reserve them, at least not any of the stores near me.

[@nazifarashid3569]

CoolDadStuff can you please help me find one about 15 by 48 or bigger, I really need this for my daughters birthday!

[@cooldadstuff2988]

Nazifa Rashid I was never able to find any online. You can try Craigslist, but people are selling them for ridiculous prices. I got this one at Walmart, but it’s like going on Black Friday, gotta get there early and hope for the best. I had to go multiple times before I could get one. Sorry😞

[@nazifarashid3569]

CoolDadStuff it’s okay what stores do you think I can check out?

[@nazifarashid3569]

CoolDadStuff oh yea and how much was the pool you got

[@cmar3182]

Wow he paid last year for everything what I will pay just for the pool. I sure would have bought one last year if I would have known that.

[@rupred72]

How did you layout the blocks?

[@cooldadstuff2988]

Brian Curtis I am planning on doing a follow up video soon with some topics that I thought of after and general status of the pool. Talking about the blocks was actually to be one of those topics! So, the assembled midpoint of the legs are approximately 38” apart. If you’re leveling the ground, you want the leveled circle to be “at least” 20’ in diameter, maybe a little more. This will give room for the 18’ of the pool legs and the extra 1 foot square of each block. I have the legs resting on the farthest point forward in the block because I don’t want the rough edges/points of the block rubbing/poking on the pool bottom. So, I assembled the pool first, not on blocks. Then once assembled, I put the blocks under each leg, but not on the tarp. You want to kinda roll up the extra material of the tarp on to the side of the pool temporarily, so that when it’s complete, you use it as a buffer of sorts between the pool bottom and block top edges. Hopefully that makes sense.... From there, a simple way to see if the pool has a good shot at being level is starting at any block, use a level to the next block and adjust as necessary. Then level the next one off of that one and so on. Theoretically, if each block is level to each other, the whole thing will be level. Once you start filling the pool, it gets heavy quick, so get it as close as you can right out of the gate. As the pool fills, it’s a bit of a chore to keep things straight and blocks adjusted as the bottom bulges here and there. I just didn’t want the blocks under any part of the liner. Once filled, I pulled the tarp sections down and trimmed them out so they were about 6” extra top and sides over the blocks and tucked it under the pool bottom as extra protection. A consideration is the blocks are brittle, I have one that has cracked, but don’t think it will crumble. Perhaps 3/4” piece of wood on top of each block would have helped or just one bad block. I just don’t like the idea of any wood involved with this amount of weight, possible flexing and water/weather damage. Hopefully that all makes sense and helps. Let me know if you have questions. Good luck!

[@rupred72]

@@cooldadstuff2988 Thank you very much for the info and I look forward to the next video!

[@JuanPerez-fm7rn]

Where did you buy these pools i cant find them anywhere ?

[@cooldadstuff2988]

I got mine at Walmart back in May. The only way I was able to get one was by going to the store when they opened. It seemed like shipments were random, so not all stores were getting them on the same days. Basically, I got lucky. I was never able to find anything online “at a reasonable price.” This late in the season, going to be difficult to find one.

[@JuanPerez-fm7rn]

@@cooldadstuff2988 nice during the pandemic its hard to get a above ground pool